멤브레인은 분리 기술 및 다양한 사용처에 따라서 유기물, 액체, 용질, 증기, 기체, 이온 또는 전자 등 다양한 물질 을 선택적으로 분리할 수 있다. 멤브레인은 크게 대칭막과 비대칭막으로 나누며, 기공의 유무에 따라 다공성과 비다공성으로 분류된다. 또한 멤브레인의 계면은 분자적으로 균일하거나, 또는 화학적으로 또는 물리적으로 불균일할 수 있다. 제조기술로 는 용융 압출 제조법, 연신법, 템플레이트 침출법, 트랙-에치법, 용액 캐스팅법, 상전이법 및 용액 코팅법 등이 있다. 제조된 멤브레인은 정밀여과, 한외여과, 나노여과, 역삼투, 기체분리 및 에너지 분야와 같은 다양한 응용 분야에 적용될 수 있다. 본 총설에서는 멤브레인의 분류 및 종류에 따른 제조 방법에 대한 튜토리얼을 제공한다.

높은 안전성과 견고한 기계적 특성을 가진 고체상 슈퍼커패시터는 차세대 에너지 저장 장치로서 세계적 관심을 끌고 있다. 슈퍼커패시터의 전극으로서 경제적인 탄소 기반 전극이 많이 사용되는데 수계 전해질을 도입하는 경우 소수성 표 면을 가진 탄소 기반 전극과의 계면 상호성이 좋지 않아 저항이 증가한다. 이와 관련하여 본 연구에서는 전극 표면에 산소 플라즈마 처리를 하여 친수화된 전극과 수계 전해질 사이의 향상된 계면 성질을 기반으로 더 높은 전기화학적 성능을 얻는 방법을 제시한다. 풍부해진 산소 작용기들로 인한 표면 친수화 효과는 접촉각 측정을 통해 확인하였으며, 전력과 지속시간을 조절함으로써 친수화 정도를 손쉽게 조절할 수 있음을 확인하였다. 수계 전해질로 PVA/H3PO4 고체상 고분자 전해질막을 사 용하였으며 프레싱하여 전극에 도입하였다. 15 W의 낮은 전력으로 5초간 산소 플라즈마 처리를 시행하는 것이 최적 조건이 었으며 슈퍼커패시터의 에너지 밀도가 약 8% 증가하였다.

본 논문에서는 UiO-66 입자를 합성하고, 이를 열가소성 탄성중합체인 polystyrene-block-polybutadiene-block-polystyrene (SBS) 블록공중합체 매질에 삽입하는 방식으로 CO2/N2 기체를 분리하기 위한 혼합 매질 분리막을 제조하였다. UiO-66 가 고분자 매질에서 미치는 영향을 확인하기 위해 SBS와 UiO-66의 질량 비율을 변화시켜가며 혼합 매질 분리막을 제조하였 다. 또한 UiO-66 입자의 균일한 분산을 위해서 두 차례에 걸친 초음파 처리 및 자성 막대를 이용한 물리적 혼합을 활용하였 다. 제조된 시료들은 푸리에 변환 적외분광법(FT-IR), 주사전자현미경(SEM)을 통해 확인하였다. 또한 기체 투과 성능은 time-lag method를 통해 확인하였다. 이때, UiO-66의 함유량이 증가함에 따라 혼합 매질 분리막의 투과도는 크게 증가하였지만, CO2/N2 선택도는 크게 감소하지 않았다. 가장 좋은 성능을 보인 20%의 UiO-66 입자를 함유한 분리막의 경우 663.8 barrer의 CO2 투 과도와 13.3의 CO2/N2 선택도를 보여주었다. 이러한 결과는 Robeson plot에서 순수 고분자 막에 비해 upper bound에 더 가까 운 성능을 나타냈는데, 첨가된 UiO-66가 선택도를 크게 희생시키지 않고 기체 투과도는 두 배 이상 향상시켰기 때문이다.

This study was conducted to evaluate the efficacy of mulberry leaf mixed diet on larval growth of Protaetia brevitarsis. As a result of adding mulberry leaves to oak fermented sawdust, the survival rate of P. brevitarsis larvae were higher than those of the control when mass rearing larvae. When fed oak fermented sawdust with 5%, 10% and 20% of mulberry leaves, the cumulative proportion of larvae over 2.5g was 93.1% at 65 days, 95.6% at 55 days, and 93.9% at 55 days after rearing at 25±1℃, respectively. Also, heavy metals were not detected in larvae of P. brevitarsis fed on mulberry leaves.

This study was conducted to evaluate the efficacy of mulberry cake mixed diet on larval growth of Protaetia brevitarsis. As a result of adding mulberry cake to oak fermented sawdust and mulberry fermented sawdust, the survival rate of P. brevitarsis larvae were higher than those of the control when mass rearing larvae. When fed oak fermented sawdust with 3, 5% and 10% of mulberry cake, the cumulative proportion of larvae over 2.5g was 92.9% at 65 days, 90.8% at 55 days, and 96.3% at 45 days after rearing at 25±1℃, respectively. When fed mulberry fermented sawdust with 3%, 5% and 10% of mulberry cake, the cumulative proportion of larvae over 2.5g was 86.2% at 85 days, 90.7% at 75 days, and 91.5% at 75 days after rearing at 25±1℃, respectively.

In order to develop the D. adamsi breeding technique that is highly likely to be used as an emotional pet insect, the results of the D. adamsi was collected in the large exhibition Jang Tae-san in Daejeon to the indoor breeding began to spawn after 10 days after the training, the egg laying period was 33.6 days, the average number of spawn per female was 27.7, and the period was 11.8 days. D. adamsi larvae bred with food of oak-boiled molted two times, the duration of 1st larvae development was 11.8 days, 2nd larvae 14.5 days, and the third larvae was 29.4, and the larvae were used to build houses using Masato(soil) and in the pupae, and then in April of the following year. D. adamsi has a characteristic to build a house with fallen leaves and spawn one or two eggs in the fallen leaves, and the results of the spawn mat test using fallen leaves, leaf mold and a sawdust, etc., and the number of spawn was high in the Masato was spread about 3 ~ 5cm, and a fallen leaves on a 10 cm or so, and the growth and survival rate of the larvae were also high. Larvae breeding density was 2 ~ 3 ℓ in the container size to raise the object was normal growth, the higher the density mortality was high and the growth was sluggish. Larvae feeding conditions were normally developed in dry fallen leaves and fermented fallen leaves, compared to the sterile fallen leaves, oak sawdust, sterile fallen leaves and oak sawdust was abnormal, the mortality rate was higher than 50%.

최근 우수한 유연성과 화학적 안정성 등을 가진 고분자 수지와 우수한 기계적 성질 등을 나타내는 무기 재료로 이루어진 나노 복합 시스템으로써 유-무기 하이브리드 코팅 필름에 관한 연구가 활발히 진행되고 있다. 아크릴레이트 단량체로써 사용된 o-phenylphenoxyethyl acrylate (OPPEA)는 1.576의 높은 굴절률을 나타내고, Bisphenol A ethoxylate diacrylate (BAEDA)는 굴절률은 낮지만 경화된 고분자의 경도를 향상시킨다. 또한, 무기 소재로써 사용된 지르코니아는 산화지르코늄으로써 우수한 내구성과 광학특성 등을 나타낸다. 본 연구에서는 광학 특성을 향상시키기 위한 목적으로 아크릴레이트 단량체 중 BAEDA의 함량을 조절하여 필름을 제조한 뒤 연필 경도계와 아베굴절계를 이용하여 광학 특성 변화를 확인하였고, UV-vis spectrophotometer을 이용해 투과도를 비교하여 최적의 조건을 확립하였다. 그리고 실란 커플링제인 γ-methacryloxypropyltrimethoxysilane (MPS)를 사용하여 지르코니아를 소수화 처리하여 아크릴레이트 단량체에 대한 분산성을 향상시키고, 개질 전후의 물에 대한 분산성 변화를 조사하여 물에 대한 친화력이 감소하였음을 확인하였고, FT-IR ATR spectrophotometer를 통해 MPS에 의해 도입된 1716 cm-1에서의 에스터 C=O 결합 peak의 존재를 통해 MPS에 의한 지르코니아 표면의 개질 반응이 진행되었음을 확인하였다. 또한, 지르코니아의 표면에 도입된 규소 원자의 존재는 X 선 형광법을 이용하여 확인하였다. 그리고 화학적으로 개질된 지르코니아를 아크릴레이트 단량체에 도입하여 광경화 필름을 제조하였을 때, 굴절률은 아크릴레이트 자체 필름보다 1.2% 향상되었음을 확인하였고, SEM/EDS mapping 분석을 통해 PET 필름에 코팅된 개질 후 지르코니아가 아크릴레이트 코팅층에 균일하게 분포되어 있음을 알 수 있었다.

Roller Compacted Concrete Pavement (RCCP) is placed by roller compaction of a mixture of less cement and unit water content and more aggregates and provides excellent early strength development with the help of interlocking of aggregates and hydration. The unit cement content of RCC pavements accounts for 85% of conventional pavements, with low drying shrinkage. As low drying shrinkage leads to smaller crack widths than ordinary concrete, RCC pavements can help elevate reflecting crack resistance if applied to a base layer of a composite pavement system. In a composite pavement with an asphalt surface laid over a concrete base, pavement temperature change is important in predicting pavement performance. As movement of the lower concrete layer is determined by temperature depending on pavement depth, temperature data of the pavement structure serves as an important parameter to prevent and control reflecting crack. Among the causes of reflecting crack, horizontal behavior of the lower concrete layer and curling-caused vertical behavior of joints/cracks are considered closely related to temperature change characteristics of the lower concrete course (Baek, 2010). Previous studies at home and abroad about reflecting crack have focused on pavement behavior depending on daily and yearly in-service temperature changes of a composite pavement (Manuel, 2005). Until now, however, studies have not been conducted on initial temperature characteristics of concrete in composite pavements where asphalt surface is placed over an RCC base. Annual temperature changes of in-service concrete pavements go up to 60 ℃, and those of asphalt overlays become around the twice at 110 ℃. This study evaluated initial crack behavior of composite pavement by investigating pavement temperature by depth of an RCC base and analyzing joint movement depending on change to temperatures of continuously jointed pavements. Findings from the study suggest that in composite pavements and asphalt overlays, time of laying asphalt has an important impact on crack behavior and reflecting crack.

This study was aimed to evaluate the dose-response the effects of nano-encapsulated conjugated linoleic acids(CLAs) on in vitro ruminal fermentation profiles. A fistulated Holstein cow was used as a donor of rumen fluid. Nano-encapsulated CLAs(LF, 5% of nano-encapsulated CLA-FFA; HF, 10% of nano-encapsulated CLA-FFA; LT, 5% of nano-encapsulated CLA-TG; HT, 10% of nano-encapsulated CLA-TG) were added to the in vitro ruminal fermentation experiment. In the in vitro ruminal incubation test, the total gas production on incubation with nano-encapsulated CLAs was increased significantly according to the incubation time, compared with the control(p<0.05). The tVFA concentrations on addition of LF and HT were significantly higher than that of the control(p<0.05). Thus, nano-encapsulated CLAs might improve the ruminal fermentation characteristics without adverse effects on the incubation process. In addition, the population of Butyrivibrio fibrisolvens which is closely related to ruminal biohydrogenation was increased by adding HT, while decreased by adding LF at 12 h incubation. These results showed that nano-encapsulated CLA-FFA could be applied to enhance CLA levels in ruminants by maintaining the stability of CLA without causing adverse effects on ruminal fermentation profiles considering the optimal dosage.

The fact that flip-flops, one of many different types of unstable shoes, are light and relatively easy to put on, accounts for their popularity among people. But because flip-flops rely heavily on the support of a single thong between your first and second toes, they impose a huge amount of pressure onto lower leg. Thus in the following experiment we tried to examine the different effects of flip-flops and running shoes in terms of their effect on muscle activity and fatigue of tibialis anterior and gastrocnemius during walking. In order to measure an electromyogram we used Free EMG system. 10 men and 10 women in running shoes ran on treadmills for 15 minutes at 4.8km/h, 2 days later the same experiment was carried out, but this time, in flip-flops. p value turned out to be greater than .05 and thus there was no considerable difference between the effects of flip-flops and running shoes on muscle activity and fatigue during walking. Therefore we conclude that despite the fact that flip-flops are considered unstable, their effects on muscle activity and fatigue of tibialis anterior and gastrocnemius are negligible.