Fly ash is a by-product of coal fired electrical power plants and used as a material for cement and concrete; particularly, imported fly ash is mainly applied for cement production. Main objectives of this article are to replace domestic fly ash with an imported source. To verify the possibility of domestic fly ash as a material for cement from the aspect of chemical composition and physical properties, we manufactured various kinds of cement, such as using only natural raw material, shale, and partial replacement with domestic and imported fly ash. When we used the domestic and imported fly ash, there were no specific problems in terms of clinker synthesis or cement manufacturing in relation to the natural material, shale. In conclusion, domestic fly ash has been confirmed as an alternative raw material for cement because 7 days and 28 days compressive strength values were better than those of reference cement using natural raw material, on top of the process issue.

국토교통부는 경주 및 포항지진을 계기로 지진으로부터 국민의 생명과 재산, 주요 기간시설물을 보호하기 위해 2018년 4월 한국시설안전공단 내에 국가내진센터를 신설하였다. 국가내진센터는 정부의 내진정책 및 제도의 이행주체로써 시설물의 내진성능을 체계적으로 확보할 수 있도록 관련 기준 제･개정, 기술자 양성, 내진성능통합관리체계 구축･운영, 지진안전 시설물 인증제도 운영 등 시설물의 지진안전과 관련한 중추적 역할을 수행하고자 한다.

A damage case of parallel strand cable anchorage was introduced, in which 7 strands were slipped from each wedge at the anchorage of the cable stayed bridge in service. Also, a cable damage detection scheme was proposed on the basis of tension force measurement and model updating method by least square estimation to minimize tension variation. The proposed scheme has been verified from analytical simulations and the actual damage case. The damaged cable leading to tension variation more than noise level of cable force measurement was successfully detected with 7~8 strands damage indication of 2% error in the actual strand slippage case.

This paper presents the seismic assessment of the effect of vertical ground motion on the three-story RC building with different geometric configurations considering the vertical-to-horizontal peak ground acceleration (V/H) ratio increases. The effects of a suite of earthquake ground motion records on three-story RC buildings are presented and the results are compared with the case of horizontal only excitation. Interstory drift was considered as a global failure criterion, while the curvature ductility and shear capacity of structural members were monitored to assess failure on a local level. The effect of vertical ground motion on axial force and shear capacity is also investigated.

This study is to investigate and analyze the correlation of carbonation according to strength of concrete members for bridge in marine enviroment. Also depth of carbonation according to age for 100 years is estimated by carbonation rate coefficient. As a result of the measurement, it was found that the depth of carbonation decreases with increasing strength. This is because it is considered that water-cement ratio and amount of unit cement are influenced by the concrete mixing. Also, It is anticipated that rebar corrosion due to carbonation will not occur in concrete members.

현수교 주 케이블은 케이블 밴드의 볼트 축력에 대한 정기적인 유지 관리가 매우 중요하다. 현수교 케이블 밴드의 볼트 축력은 시간이 경과함에 따라 케이블 소선의 크리프 현상, 볼트의 릴렉세이션, 하중 변동, 케이블 소선의 재배열 등으로 인해 축력 감소 현상이 발생하게 된다. 본 연구에서는 국내 현수 교량(SR대교)의 케이블 밴드가 시간이 경과하면서 발생하는 축력 감소 현상에 대해 그 원인 및 감소량 등에 대한 현장 측정 및 이론적 검토, 안전율 검토, 장기적인 이력 관리 등을 수행하였다. 그 결과, 케이블 밴드 볼트 축력 감소는 주 케이블 소선에 사용된 아연 도금층의 소성 변형에 크게 영향받는 것을 확인하였으며, 이에 대한 이론적 체계 및 장기 이력 관리에 대한 적용성을 확립하였다.

본 연구는 현수교에 설치된 주케이블 제습시스템의 효율성에 대한 검증을 수행한 것으로서, 송기 시스템 본체, 주케이블 내부, 대기중에서 온도 및 습도 등의 데이터를 측정하여, 교량에 설치된 제습시 스템의 작동 유·무를 고려한 습도변화량 등을 분석하였다.

This paper evaluated a stress for the girder reinforced by cross rib. As a result, The cross rib reduced the maximum and mnimum stress generated in girder because of evenly distributing the load.

This study on the maintenance of axial force of the cable band bolts in suspension bridge. The axial force on the cable band is reduced as suspension bridge of increases service period. In is a summary of the field measurement results and review of cause.

In this study, measurement temperature in the bridges was compared with temperature proposed by Korean design code. In addition, the structural analysis was performed in order to comparing the stress by measured thermal load and the stress by design thermal load. As a result, the stress that applied measurement temperature was evaluated larger than the stress that applied temperature proposed by Korean design code.

The suspension bridge main cable requires regular maintenance works to control the axial forces of the cable band bolts. A axial forces of a suspension bridge cable band occur reduction phenomenon because of the creep behavior of cable wire, the bolts relaxation, load fluctuation and cable rearrangements with the lapse of time.

The thermal load must be considered to design cable supported bridges as a variable load. The thermal load recommended by Korean design code might be different to real temperature distribution in the bridges because the thermal load proposed by Korean design code is referred to Eurocode, etc. Therefore this study proposes the temperature distribution of cable supported bridges In Korea based on measurements.

In this study, the structural assessment on the effect of differential deformation of HDRB was performed for double deck warren truss bridge. The results show that the differential deformation of HDRB sharply decreases the safety rate of the superstructure of the bridge.

This study focuses on presenting a resistance capacity model of bridge which considers the surrounding environment. This model provides the timely decreasing characteristics of resistance capacity during the service life of bridge. The presented model is developed by using the statistical data announced to the public and the reliable research reports. The developed model is applied to evaluate the lifetime safety/reliability of a bridge. Based on the result of this evaluation, this study aims to accumulate the basic data of bridge maintenance works.

The expression 'Resistance capacity' in bridge engineering indicates the certain qualitative level of important characteristics that a bridge possesses, against the various types of action or load. Even if the bridges are constructed with similar feature, the resistance capacities evaluated from these bridges are different due to the uncertainties. This study focuses on presenting a resistance capacity model of bridge which considers the uncertainties caused from the statistical characteristics of bridge members. The developed model is applied to evaluate the lifetime safety/reliability of a bridge. Based on the result of this evaluation, this study aims to improve the effectiveness of bridge maintenance works.

In this study, periodical configuration survey is carried out on the subject of the suspension bridge in service. Its reliability and structural modeling validity are performed by comparison and analysis of interpretation value through the structural analysis.

The wind load characteristics are represented by wind speed, wind direction, turbulence intensity, roughness index of terrain, spectral density and so on. In this paper, the wind load characteristics of long span bridges in general national roads are evaluated based on measured data of wind speed and direction.

This paper developed analysis model with measured data and geometric nonlinearity for more precise evaluation of structure behavior of suspension bridge. This analysis model helps to make plan and evaluate of structure behavior for accidents such as traffic, typhoon and earthquake. Also, this helps to make maintenance and management plan for structure.