In this study, we synthesize tungsten oxide thin films by electrodeposition and characterize their electrochromic properties. Depending on the deposition modes, compact and porous tungsten oxide films are fabricated on a transparent indium tin oxide (ITO) substrate. The morphology and crystal structure of the electrodeposited tungsten oxide thin films are investigated by scanning electron microscopy (SEM) and X-ray diffraction (XRD). X-ray photoelectron spectroscopy is employed to verify the chemical composition and the oxidation state of the films. Compared to the compact tungsten oxides, the porous films show superior electrochemical activities with higher reversibility during electrochemical reactions. Furthermore, they exhibit very high color contrast (97.0%) and switching speed (3.1 and 3.2 s). The outstanding electrochromic performances of the porous tungsten oxide thin films are mainly attributed to the porous structure, which facilitates ion intercalation/deintercalation during electrochemical reactions.

In order to study the community structure and distribution pattern of macrobenthos in the subtidal area of Shia Sea between Haenam peninsula and Shinan-Jindo area at southwest coast of Korea, duplicate sediment samples were taken seasonally by van Veen grab (surface area, 0.1 m2) from 49 stations between November 2001 and August 2002. The surface sediment facies were muddy sandy gravel near Mokpo-Gu channel, gravel in the Myoungrang channel with high tidal currents, and sandy muddy in the southern Uido area. Ignition loss in the sediment ranged from 0.5 to 1.5% with a mean of 0.6%. A total of 271 taxa were collected with a mean density of 166 ind.m-2 and a mean biomass of 29.2 gm-2. Polychaetes were dominant faunal group in terms of species richness and abundance, accounting for 34% and 40% of total species number and abundance, respectively. Molluscs accounted for 44% of biomass. Bio-Env analysis revealed that sediment composition and ignition loss affected the spatial distribution of subtidal macrobenthic community in the study area. Major dominant species were Photis longicaudata, Septifer keenae, Maldane cristata, Lumbrineris longifolia, Heteromastus filiformis and Coptothyris grayi. Based on cluster analysis, four station groups were classified. They were associated with sediment types. Bivalve, Striarca symmetrica, polychaetes, Glycera chirori, Heteromastus filiformis and decapod Latreutes planirostris were major contributing fauna in station group A, B, C, and D, respectively. These results suggest that macrobenthic community of the Shia Sea is normally influenced by sediment type and related ignition loss.

본 연구에서는 건조 후 20여년 운항한 군산대학교 실습선 해림호의 발전기를 대상으로 직접 선박현장에서 실험하여 최적 연료분사시기를 규명해서 선박의 경제적이고 친환경적인 운항에 도움을 주고자 연구하였다. 실험은 기관회전속도 1,200 rpm으로 일정히 유지하고, 기관부하를 0 kW에서 90 kW까지 30 kW간격으로 변화시켰으며, 연료분사시기는 BTDC 19o에서 23o까지 2o 간격으로 변화시키면서 실험하였다. 실험결과 연료분사시기를 BTDC 21°에서 BTDC 23°로 앞당길 경우, 연료소비율은 1.37 % 감소하였고, 질소산화물은 11.59 % 증가하였으며, 매연은 23.5 % 감소하였고, 아황산가스는 2.8 % 감소하였다. 따라서 노후 발전기 엔진에 있어서 연료분사시기가 연소특성 및 배기배출물특성에 미치는 영향을 종합적으로 분석․고찰한 결과, 최적 연료분사시기는 원래의 분사시기보다 2° 앞당겨진 BTDC 23°로 확인되었다.

산유국으로부터 에너지 독립을 하고 대기오염방지를 위한 배기배출물을 저감시키기 위하여 대체연료에 많은 관심을 가지고 있다. 폐유나 새로운 식물성 기름과 동물성 기름으로부터 생성할 수 있는 바이오디젤유가 압축점화기관인 디젤기관에 구조적인 변화없이 사용될 수 있다. 이 논문에서는 4행정 직접분사식 디젤기관을 이용하여 순수 디젤유와 바이오디젤 혼합유(바이오디젤 10% 및 20% 함유)의 연료소비율과 배기배출물에 미치는 영향을 제시했으며, 특히 실험에 사용된 바이오디젤 연료는 우리 실험실에서 유채유로부터 직접 생산되었다. 이 연구 결과 바이오디젤 혼합유가 디젤유 보다 연료소비율과 질소산화물은 약간 증가 되었고 일산화탄소와 매연은 상당히 감소되었다.

As a result of globalization process and TBT agreement, KS is also being revised, reestablished and some are abolished according to international standards such as ISO, IEC, etc. Conventional KS sampling inspection standards contained many different proce

The growing importance of product quality is becoming more and more daily apparent as we enter the age of globalization around the world. And the product safety is getting more focus as well as product quality. As a result, many domestic companies are putting a lot of emphasis on safety measures and management activities and these companies' products are mainly superior to other companies' product. When we separate the product quality procedure into 3 steps, i.e. quality secure-quality confirm-quality guarantee, of course the 1st step is the most important, but also End step of product quality confirm process is important. And in mass production environment, sampling inspection is more desirable than the 100 % inspection procedure. As a part of globalization trend, KS system is also being revised and reestablished based on ISO, IEC, etc. which are based on international standard. Conventional KS sampling inspection standards were in many areas quite different from ISO sampling standards, only KS A 3102, 3104, 3151 are left and the rest become obsolete, and even the ones that are still around are planned to the gone step by step. It has been already 3 years since the new KS A ISO 2859-0-3 sampling inspection process has been established which the abolition of the popular KS A 3101, KS A 3105, KS A 3109, yet the implementation rate is very slow. This study will attempt to analyze the new KS A ISO 2859-2 and KS A ISO 2859-3, and try to understand the difference as that the new standard can be easily understood and used widely among companies, by using examples. Our attempt is to help implement with the companies with active safety involvement but the final result can be spread among other companies as well in the near future.

The growing importance of product quality is becoming more and more daily apparent as we enter the age of globalization around the world. And the product safety is getting more focus as well as product quality. As a result, many domestic companies are putting a lot of emphasis on safety measures and management activities and these companies' products are mainly superior to other companies' product. When we separate the product quality procedure into 3 steps, i.e. quality secure-quality confirm-quality guarantee, of course the 1st step is the most important, but also 2nd step of product quality confirm process is important. And in mass production environment, sampling inspection is more desirable than the 100% inspection procedure. As a part of globalization trend, KS system is also being revised and reestablished based on ISO, IEC, etc. which are based on international standard. Conventional KS sampling inspection standards were in many areas quite different from ISO sampling standards, only KS A 3102, 3104, 3151 are left and the rest become obsolete, and even the ones that are still around are planned to the gone step by step. It has been already 3 years since the new KS A ISO 2859-0~3 sampling inspection process has been established which the abolition of the popular KS A 3101, KS A 3105, KS A 3109, yet the implementation rate is very slow. This study will attempt to analyze the new KS A ISO 2859-2 and KS A ISO 2859-3, and try to understand the difference as that the new standard can be easily understood and used widely among companies, by using examples. Our attempt is to help implement with the companies with active safety involvement but the final result can be spread among other companies as well in the near future.

As a result of globalization process and TBT agreement, KS is also being revised, reestablished and some are abolished according to international standards such as ISO, IEC, etc. Conventional KS sampling inspection standards contained many different procedures from ISO, but recently, to match with international standards, all the rest of the standards except KS A 3102, 3104, 3151 were abolished, and the even the ones being in use still are also scheduled and be revised. Especially, KS A 3101, KS A 3105, KS A 3109, which were used most frequently in Korea were abolished, and the KS A ISO 2859-0~3 which coincide with ISO standards were established 3 years ago, but the implementation rate is very slow. Starting next year the national examination for qualification process for the product quality related item will the started and the preparation is underway. This study will investigate the recent sampling inspection process of KS as well as SPC related KS overhaul problem and present the data to help workers in SPC related field. One of the main example will be on KS A ISO 2859-3 and will attempt to help those medium and small sized companies with examples.