The light rail transits, in theses days, are planed to be introduced in Korea. However, there are more and more problems regarding the noise and vibration from the trackway. In order to reduced the vibration and noise, various method have been applied. Among those methods, it is that one of the most effective ways is to apply the floating mat underneath the slab track. In this stud, a numerical modeling to calculate the effect of the floating mat is to be used as well as the performance of the floating track.

In the case of railway bridges through the downtown section is required for noise reduction performance is excellent bridge type. According to this request, the bridge of the noise barrier installation is not required and low vibration is under development. This railway bridge is corrugated steel plates composite lower route bridge. Because the bridge cross-section wraps a train, noise is reduced. In this study, Using a commercial finite element analysis program, the dynamic stability evaluation is performed.

The light rail transits, in theses days, are planed to be introduced in Korea. However, there are more and more problems regarding the noise and vibration from the trackway. In order to reduced the vibration and noise, various method have been applied. Among those methods, it is that one of the most effective ways is to apply the floating mat underneath the slab track. In this stud, a numerical modeling to calculate the effect of the floating mat is to be used as well as the performance of the floating track.

Railway bridges through the downtown region is an excellent bridge type noise reduction performance is required. According to this request, the bridge of the noise barrier installation is not required and low vibration is under development. This railway bridge is PSC U-Type lower route railway bridge with sound absorbing system. Because the bridge cross-section wraps a train and web contains the sound-absorbing system, noise is reduced. In this study, we analyzed the noise reduction performance of PSC U-Type lower route railway bridge with sound absorbing system using general noise analysis program.

This paper were studied overseas development practices for develop to silent bridge. This paper suggests considerations of the development of silent bridge using the result of the investigation. Finally, this paper suggests the research direction of the development of silent bridge.

In this paper, the case study is investigated for the application of vibration absorbing in railway bridge. This paper suggests considerations of the application of vibration absorbing in railway bridge using the result of the investigation. Finally, this paper suggests the research direction of the application of vibration absorbing in railway bridge.

Recently, modular technologies have been developed in nuclear power plant structures and bridge structures. In addition, they can be utilized in the underground structure of near surface transit system. In this study, the research and development plan of the modular slab structure and construction technology for near surface transit system described.

In order to measure the real-time displacement of a rail with train vehicles on service, a displacement meter has to be installed near the rail in conventional method. However, on this study, an innovative method is developed to measure the displacement of rail in real-time using laser vibrometer in a distance.

In order to analyze the accuracy of acceleration measurement by the laser vibrometer, natural frequency measured by the laser vibrometer were compared with that acquired by using conventional accelerometer. The results show that the margin of error is about 2% in the case of the measurement by the low pass filter.

This paper is a preliminary study for development of hybrid PSC girder. In order to evaluate the performance of the proposed dead anchor system, load transmission performance tests were conducted. Test result, the applicability of proposed dead anchor system was considered possible.

This paper presents the optimized design of Extradosed bridges using 2,160MPa PS strand and their economic benefits. Original structural design on the bridges using 1860MPa was reviewed in order to compare the values from the design with the optimization results.

This paper presents the optimized design of PSC Girder Railway bridges using 2,160/2,400MPa PS strand and their economic benefits. Original structural design on the bridges using 1860MPa was reviewed in order to compare the values from the design with the optimization results.

In this Study cable tension of existing cable-stayed bridge is measured by non-contact laser vibrometer, and applicability of a non-contact vibration measurement method is experimentally evaluated. According to the analysis results, the non-contact vibration measurement method reveals an error of less than 5%, and could be efficiently applied to a rapid measurement for nonstationary response analysis of bridge structures.

무가선 저상트램은 친환경 고효율 교통수단으로서 저렴한 건설비, 도시 미관의 개선, 도시 주변 지역 활성화 및 승객 편의성 확보 등의 장점을 보유한 신교통 수단으로 10개 이상의 지역단체에서 도입을 검토 중에 있다. 이에 따라 무가선 저상트램 차량과 노면선로 및 도로교통과 복합된 신호시스템의의 개발, 인프라시스템 구축을 위한 연구가 활발히 진행 중에 있다. 무가선 저상트램 노면선로 중 도심지 구간에서는 레일이 노면에 매립되는 매립형궤도 시스템이 적용되고 있다. 매립형궤도 시스템은 소음 진동의 저감, 공기 단축 및 유지보수 최소화 등의 장점을 보유한 것으로 알려져 있다. 이에 본 논문에서는 국내에서 시공사례가 전무한 매립형궤도 시스템을 설계하여 시험시공을 수행하였고 시공과정에서 발생한 문제점을 파악하였다. 또한 시험선 완공 후 진동과 소음을 일반 자갈도상궤도와 비교 측정하여 매립형궤도 시스템의 소음 진동 저감 성능을 정략적으로 분석하였다.

The innovative and environment-friendly tram vehicle and it’s trackway system are developed based on the government’s R&D funding. Accordingly, in order for the test drive of developed vehicle, a tram trackway as test-bed, is being constructed in Osong, where is located inside Korea Rail Network Authority in Chungcheongbuk-Do. In this paper, the construction method of trackway for wireless and low-floored tram vehicle is introduced for the first time in Korea.

본 논문에서는 비부착식 진동측정기법에 의한 공용중 교량의 진동사용성을 평가하고자 레이저 진동측정장치를 이용하여 진동사용성 평가 실험을 하였으며, 그 결과를 가속도계 및 처짐계를 사용하여 얻은 결과와 비교 분석 하였다. 레이저 진동측정장치의 측정에 대한 정확도는 실교량의 고유진동수를 측정하고, 이를 가속도계로 구한 값과 비교함으로서 검증하였다. 진동사용성 평가 실험 및 비교 분석 결과에 의하면, 측정속도의 수치미분을 통하여 가속도를 추정하고, 가속도 진폭에 대한 Reiher-Meister 진동사용성 평가기준을 이용함으로써 공용중 교량의 진동사용성을 평가할 수 있으며, 추정된 변위 진폭에 대한 경우 측정속도의 시간영역 수치적분 과정에서 발생된 오차로 인해 실제 측정된 변위 진폭에 대한 진동사용성 등급과는 다른 결과를 얻을 수 있음을 알 수 있었다.