In this study, a numerical analysis was performed as steady-state analysis to investigate the effect of interference between the propellers of the hexa-copter. As the distance increases, there is little change in thrust, but when a propeller close to the reference propeller rotates, it was confirmed that the thrust decreased due to the interference effect. Unsteady state analysis was performed to confirm the influence of the hexa-copter fuselage. If there is a fuselage, the thrust was predicted to increase by about 4.97% due to the ground effect. If the design parameters are established considering the effect of the fuselage of the hexa-copter, it is expected to be used for basic design and application design in the future.

In this study, the noise reduction effect of the steam vent silencer was investigated by performing a transient flow analysis applying the Loss Model, a porous flow analysis model, and calculating the noise intensity from the pressure fluctuation according to the time change. As a result of flow analysis, it was confirmed that the noise intensity decreased as the number of diffusers and the number of splitters made of foamed aluminum increased. In the case of three-stage diffusers, the noise intensity decreased by up to 33.4 dB when six foamed aluminum with a thickness of 150mm were installed.

This research was conducted for dewatered sludge cake of industrial wastewater treatment, i.e., as the object of inorganic sludge discharged especially in iron & steel manufacturing shop which used Air drying system to reduce water content. That drying system's single-type cyclone separator was confirmed to have significantly lower separation efficiency on the conditions 20μm and below of particular size through computational fluid dynamics(CFD) analysis. However, we found out the primarily advanced value of separation efficiency on dual-type directly connected. Regarding separation efficiency on size of 10μm, the efficiency of a single-type was presented at 51.91%. On the other side, the efficiency of the dual-type was 97.88%. This advanced effect of the dual cyclone separator was checked at a demo facility of air drying equipment designed by 340m3/min of airflow on site.

This thesis relates to developing an index drilling automation system that quickly and efficiently processes a hole in a product by a rotating robot arm and transfer devices. Static structural analysis was performed using the ANSYS Mechanical program to evaluate the structural stability of the system. According to the research, the equivalent stress value is low overall, and the minimum safety factor is 4.42, so it seems structurally safe. This system will significantly help improve productivity through unmanned work as it can control and set the drill and index simultaneously on the control panel in conjunction with the training.

This paper is about structural, and vibration analysis for the development of Index chucks Structural and vibration analyses were performed using the ANSYS Mechanical program to evaluate the Index chuck's structural stability and vibration characteristics. As a analysis result, when the maximum load of 500N was applied to the Index chuck, the safety factors were 2.06, 2.09, and 2.60, respectively, when the thickness was 5mm, and the outer diameters were 70mm, 90mm, and 120mm, respectively. Structurally safe results were obtained. In addition, under load conditions of 300 N or less, structural safety was confirmed if the thickness is 3mm or more.