최근 현장작업을 최소화할 수 있는 PC(Precast Concrete) 건축공법의 적용이 급속하게 활성화되고 있다. 그러나 PC 공법은 시공 중, 특히 부재간 일체화 이전에 구조적 성능을 발휘하기 어렵고 완공 후에도 접합부의 일체성을 확보하기 어려워 연쇄붕괴에 취약하다. PC 건축물에서는 다양한 PC 부재간 접합 상세가 존재하며, 국내외 구조/시공 상세가 현격히 다르다. 그러나 국내 PC 시스템의 시스템 과 상세 특성을 반영한 연쇄붕괴에 대한 연구는 매우 미비하다. 따라서, 본 연구에서는 국내에서 주로 사용하는 PC 구조시스템과 접 합부 구조/시공 상세를 조사 분석하였다. 이를 기반으로 국내에서 사용되는 전형적인 PC 시스템의 유형을 설정하고 상기 PC 시스템 의 연쇄붕괴방지성능을 평가하기 위하여 비선형 유한요소해석을 수행하였다. 해석결과를 바탕으로 국내에서 주로 사용된 PC 구조시 스템의 연쇄붕괴방지 성능을 평가하고 구조설계시 고려사항을 제안하였다.

In this study, Flexural tests for prefabricated composite columns using steel angle and band steel were carried out. The composite columns are fabricated by bolting the angles and the band steels before casting concrete and named, therefore, B-PSRC(Bolt-connected Prefabricated Steel Reinforced Concrete) columns. A SRC composite column and four of B-PSRC columns were prepared for flexural load tests. From the test results, all the specimens showed flexural failure, which is due to rupture of hole-section at the angle-bolt joints. Shear failure caused by bond slip between the angles and concrete was not found in any of specimens. The flexural strength of B-PSRC columns which were designed, the same steel ratio as the SRC columns was shown to be higher than that of SRC columns.

Connection details for RC column-steel beam (RCS) moment frames were developed to improve the productivity and constructability. To strengthen the beam-column joint, transverse beams, studs, and U-cross ties were used. Four 2/3 scale interior RCS connections were tested under cyclic lateral loading. The specimens generally exhibited good deformation capacity exceeding 4.0% story drift ratio. Ultimately, the specimens failed due to bearing failure of concrete and shear failure of the joint panel.

Under cyclic loading, the structural performance of reinforced concrete (RC) beam-column connections is significantly affected by the bond-slip of beam re-bars. In the present study, a bond-slip model was developed to evaluate bond-slip of beam re-bars in beam-column joints. The prediction of the proposed model agreed well with the bond strength degradation and bond-slip in the beam-column joints.

Under cyclic loading, the shear capacity of reinforced concrete (RC) beam-column connections is significantly decreased by the joint bond-slip and shear cracking as deformation increases. In the present study, Joint shear strength model on the basis of bond-slip was developed to evaluate deformability at the joint shear failure.