The purpose of this study was to develop a grid forming equipment of the electromagenetic interference(EMI) shielding sheet for use in a wireless charger. In addition, the present study was to form a lattice in the surface of the thin metal ribbon to exert an electromagnetic wave shielding performance of the precision small electronic devices such as smart phones. For this, grid forming presses such as manual pressurized press, automatic pressurized press, heat pressurized press, and continuous grid forming equipment with cylinder roll type, and a grid inspection and grid uniformity inspection devices have been developed. Finally, the cylindrical roller-type continuous grid forming equipment showed the best suited.

In this study, the horizontal automatic scum remover with buoyant type is developed to reduce the cost of facility and is suitable for unit-process automation. This system is consist of the scum collecting box, leveling device for scum collecting box, drive device for scum collecting box, water level sensor and indicator, departure prevention device of scum collecting box, setting monitor, main control panel, etc. Performance tests for the system such as the accuracy of the scum thickness measurement, horizontal degree of the scum collecting box, scum removal time, accuracy of an unmanned control have been performed. The performance of the prototype system satisfies all the objects of this study.

In this study, the horizontal automatic scum remover with buoyant type is developed to reduce the cost of facility and is suitable for unit-process automation. This system is consist of the scum collecting box, leveling device for scum collecting box, drive device for scum collecting box, water level sensor and indicator, departure prevention device of scum collecting box, setting monitor, main control panel, etc. Performance tests for the system such as the accuracy of the scum thickness measurement, horizontal degree of the scum collecting box, scum removal time, accuracy of an unmanned control have been performed. The performance of the prototype system satisfies all the objects of this study.

The grid pattern electromagnetic interference(EMI) shielding sheet for the wireless charger has been designed using grid pattern metal sheet, PET & DST stacking and laminating technology. Also, an automatic manufacturing system of the grid pattern EMI shielding sheet for the wireless charger is developed. This metal sheet with grid pattern is an effective shield against EMI that can not shield completely by existing single metal sheet. And the developed automatic manufacturing system having a laminated productivity exceeds the 8m/min can stack and lamination thin metal sheets without any wrinkles.

The EMI shield material with narrow width has some deficiencies in shielding capability and this deficiencies are caused by the inconsistent relationship between the inductance and temperature after heat treatment. This study is performed to develop a nano crystal magnetization heat treatment process technology and design a EMI shielding material with wide width up to 350mm. As a result, the performance of the developed wide EMI shield material satisfies all the objects of this study such as the inductance, thickness, permeability, ribbon productivity, lamination productivity. Also, we find that this wide EMI shield material can be used effectively for the EMI shield room, large medical equipment and so on.

In this study, the lower power consumption FET-DC contactor for golf cart and low speed electric vehicle has been designed and developed. Also, the author carrying out many measurements and tests such as an electric power consumption, current consumption, calorific value, size, volume and weight of the DC contactor for the various cases. As a result, the author found that a prototype of the lower power consumption FET-DC contactor can not only reduce calorific value, size, volume and weight but also improve an electric power and current consumption.

The functional wood plastic composite(WPC) is one of the noted materials for landscape architecture and residential construction. Iron band, embossing and drain holes are improve the strength and skid resistance of the WPC. In this study, we had developed an automatic manufacturing system for the functional WPC that has vertical pattern embossing and drain holes. The system is consist of an automatic vertical pattern embossing device, multi-spindle drilling M/C, sanding device, inspection equipment, and some facilities developed in the previous research. The performance tests on the several functional items of the system and manufactured WPC represented satisfactory values except the skid resistance and absorption thickness expansion rate.

Multi-layered metal sheet for electromagnetic interference(EMI) shielding purpose has been designed using metal sheet, PET & DST stacking and laminating technology. Also, an automatic manufacturing system is developed. This metal sheet with multi-layered structure is an effective shield against EMI that can not shield completely by single metal sheet. And the developed automatic manufacturing system can stack and lamination thin metal sheets without any wrinkles.

In this study, we have developed an automatic manufacturing system for functional wood plastic composites(WPC) which are one of spotlighting materials for landscape architecture and residential construction material. In addition to the existing facilities, this manufacturing system is consist of an automatic hole manufacturing device, iron band supply and winding device, mold with the iron band insert system, calibration unit, control system, etc. We have performed the performance tests for the system such as the specific gravity, bending strength, screw holding power, percentage of moisture content, formaldehyde, absorption thickness, expansion rate, cold resistance(appearance & bending strength), and shock resistance. As a result, the performance of the prototype system satisfies all the objects of this study.

In this study, development of the manufacturing system for the oriental medicine needle was carried through the wire drawing from the wire supply, straightness, heat treatment and surface treatment processes, and finally wire cutting or winding by the online process. As a result, a prototype manufacturing system for the oriental medicine needle wire has been developed. It has been shown that all development targets, such as, straightness, precision, surface roughness, tensile strength, discoloration, noise, diameter range and maximum production speed have been satisfied through the performance test.

Traditionally the powder polymer has been used in the sewage sludge treatment and water purifying plants. The powder polymer, however, has several problems such as bad working condition by dispersed powder and unstable operation of dehydrator by a lump of undissolved polymer. In this study, high accuracy automatic dissolving system for emulsion polymer is developed to reduce the cost of facility and is suitable for unit-process automation. This system is consist of the emulsion polymer storage tank, polymer dissolving solution supply tank, mixing chamber, micom and mobile system, etc. Performance tests for the system such as the rated flow of flowmeter, quantity of the tube pump, solubility of the mixing chamber, accuracy of micom and mobile system have been performed. The performance of the prototype system satisfies all the objects of this study.

The effective use of disinfection and sterilization is important in preventing healthcare associated infections. Especially, multi-drug resistant organism and spore-forming bacteria are serious pathogens. Therefore, control of a nosocomial infection is emerging as a big problem. It is efficiently necessary to eliminate the pathogen. In this study, the components of sterilant were optimized. The optimized sterilant was applied for efficiency of sterilization using G. stearothermophilus E. coli, S. aureus as a standard microorganism. Our results were shown as follows : The decomposition or loss of potency of sterilant in small containers did not appeared for one month at ambient temperature. All of hydrogen peroxide 0.5%, peracetic acid 0.01%, and IPA 60% was effective for sterilization of E. coli, S. aureus using dilution method. Two kinds of sterilants(hydrogen peroxide 2%+peracetic acid 0.1%+IPA 0.5%, hydrogen peroxide 4%+peracetic acid 0.06%+IPA 1%) were bacteriocidal(> 6 log reduction). Microorganisms(E. coli, S. aureus) which treated with these sterilants for 2min were not grown in LB broth at 7 days culture. The gas plasma system for sterilization was applied. The sterilant solution(hydrogen peroxide 20%+IPA 5%) was vaporized in the sterilization chamber. The vaporized sterilant was bacteriocidal and sporocidal(> 6 log reduction) using G. stearothermophilus E. coli, S. aureus as biological indicators

The adoption of scroll type air compressor is gradually increased in the automotive/residential air-conditioner and clean air compressor, and the most of critical components of the scroll are made of aluminum to reduce the friction and weight. Many studies for the surface treatment of the aluminum have been performed to reduce the friction between the components. In the preceding research, we suggested the most appropriate combination of the solid lubricant. In this study, we coated the part of fixed or orbiting scroll wrap with the solid lubricant that suggested in the preceding research, and then have performed analysis of performance characteristics for the part. As a result, we could obtain the 7.66μm of the coating thickness, Ra 0.8μm of the surface roughness and 0.088 of the friction coefficient. These represent the satisfactory capability of the suggested solid lubricant for the scroll type air compressor.

In our country, the number of coffee shops has steadily increased, reaching approximately 15,000 in 2013 from 1,254 in 2006. Adding to increase of coffee shops, customers' preference of roasted beans and extraction to ready-made coffee or instant coffee has lead to rapid expansion of roasted coffee market. In this study, the semi-rotating fluidized bed roaster prototype to reduce LPG consumption of the existing 60kg class large rotating fluidized bed roaster has been designed and retrofitted. In addition to the roaster prototype, processing system consist of bean automatic feeding equipment, debris sorting device, cooling device, cyclone collector, main control system etc. was developed. Also, the authors carrying out many measurements and tests such as LPG consumption, bean transfer time, debris sorting rate, cooling time and temperature, chaff collection rate for the various cases. As a result, the authors found that the semi-rotating fluidized bed roaster prototype can not only reduce LPG consumption, green bean transfer time, cooling time and temperature but also improve debris sorting rate, chaff collection rate of during coffee roasting

Automatic continuous manufacturing system is necessary to raise the productivity and strengthen the competitiveness in the wire manufacturing. The automatic wire cutting technology is an important element to link various processes and it is crucial technology to obtain high accuracy and quality of the wire. This study was performed to develop an automatic stainless steel wire cutting equipment that is consist of the first and second cutting equipments besides related devices to cut stainless steel wire. This wire cutting equipment can cut wire with high accuracy, and it can prevent sintering and discoloration

The coating of solid lubricant on the part of fixed or orbiting scroll wrap in a scroll compressor can not only reduce friction loss, noise & vibration and time cost for surface finishing but also improve efficiency and performance of the compressor. In this study, we found the most appropriate combination of the solid lubricant by carrying out many measurements and tests such as coefficient of friction, surface structure, the coating thickness and surface roughness for the various cases. We have come to conclusion that the most appropriate solid lubricant can be obtained by adding WS2 3% to Base(SM 3901) without any solvent and filler.

우리벼메뚜기의 평균 발육기간은 41.6 ± 9.8 (mean ± SD)일로 조사되었고 1령 부터 6령까지 각각 9.3 ± 1.7; 6.8 ± 1.7; 6.5 ± 1.4; 7.6 ± 2.1; 9.0 ± 2.3; 11.8 ± 1.8 (mean ± SD)일이었다. 1령부터 7령까지의 평균 섭식량은 각각 3.5 ± 3.2; 6.7 ± 3.9; 15.5 ± 11.1; 44.9 ± 27.7; 96.3 ± 54.3; 115.7 ± 35.1; 101.9 ± 57.8 (mean ± SD) ㎠이 었다. 부화 약충에게 보리와 옥수수를 공급한 결과 부화 1일차 약충 42.3%는 보리 를 26.9%는 옥수수를 섭식하였고 두 기주식물 모두 섭식한 것은 26.9%이었다. 하 지만 부화 2 ~ 4일차까지의 약충 65.4%는 옥수수를 섭식하였고 두 기주식물 모두 를 섭식한 것은 26.9%로 옥수수를 선호하였다. 부화 직후의 1일간 평균 섭식량은 0.46 ± 0.69 (mean ± SD) ㎠ 이었고 2일부터 4일차까지 1.15 ± 0.80 (mean ± SD) ㎠ 이었다. 우리벼메뚜기는 수분함량이 90%인 산란배지에 66.1% 산란하였고 60% 와 30%에는 각각 19.5, 14.4% 산란하였다. 주당 평균 산란수는 1.0 ± 0.4 (mean ± SD)개로 조사되었다.