The purpose of this study is to investigate the ultimate strength of carbon steel (SS400) fillet-welded connections with weld metal fracture through monotonic tensile test. Specimens of CTFW series (transverse fillet weld against loading direction), CLFW series (longitudinal fillet weld against loading direction) and CFW series (a combination of transverse weld and longitudinal weld) failed by tensile fracture, shear fracture and block shear fracture, respectively. Test strengths were compared according to welding direction and weld length

Stainless steel has many advantages such as excellent durability, ductility and corrosion resistance. Recently, the use of stainless steel has been increased in a variety of structural members and industrial fields. But, stainless steels are not included is the structural materials of Korean building standards and corresponding design standards are not specified. In this paper, finite element analysis has been performed to investigate the ultimate strength of single shear duplex stainless steel (STS329FLD) four-bolted connection with extended variables. As a result, strength reduction ratio by curling was estimated quantitatively.

최근에 오스테나이트와 페라이트의 조직을 갖는 듀플렉스계 스테인리스강이 개발되었고 오스테나이트계 스테인리스강에 비해 고강도, 응력부식균열에 대한 고내식성과 재료비절감으로 다양한 산업분야에서 사용량이 증가되고 있다. 그러나, 현재 스테인리스강은 한국 건축구조기준에 구조용재료로 지정되어 있지 않고 구조설계기준도 마련되어 있지 않는 실정이다. 이 연구에서는 2행 1열 듀플렉스계 스테인리스강(STS329FLD) 볼트접합부에 대한 구조적 성능을 조사하기 위한 실험적 연구를 수행하였다. 주요변수는 전단접합형태(일면전단과 이면 전단)과 하중방향 연단거리이다. 종국파단형태는 전형적인 블록전단파단, 인장파단과 면외변형이 관찰되었다. 일면전단 접합부에서 면외변 형발생으로 최대 20%까지 내력저하가 발생되었다. 실험최대내력은 현행설계기준 AISC/AISI/KBC, EC3와 AIJ 및 기존연구자에 의한 제안된 식에 의한 예측내력과 비교하였다. 면외변형이 발생하지 않은 접합부에 대해서 실제 전단파단단면을 고려한 Clement & The의 식에 의한 예측 내력이 실험내력에 가장 근접했고 면외변형을 동반한 접합부에 대해서는 면외변형을 고려해 제안한 Kim & Lim식에 의해서 과대평가하는 것으로 나타났다.

In this study, structural behaviors such as ultimate strength and fracture shape of duplex stainless steel (STS329FLD) fillet-welded connections according to welding direction were investigated through monotonic tensile test. Main variables are weld length and welding direction against the loading direction. Specimens of SDTFW series (transverse to the loading direction) and SDLFW series (longitudinal to the loading direction) failed by tensile fracture and shear fracture, respectively. Ultimate strengths got higher with the increase of weld length and SDTFW series showed higher ultimate strengths than SDLFW series.

오스테나이트계 스테인리스강은 우수한 내식성, 내구성 및 내화성을 지닌다. 특히, 오스테나이트계 스테인리스강중의 대표인 STS304에 비해 저탄소를 함유하고 있는 STS304L은 현장용접 후 별도의 열처리 없이 높은 내입계부식성능을 지니고 있어 용접후 내입계 부식이 우려되는 부재접합에 적용할 수 있다. 본 연구에서는 티그(TIG)용접으로 필릿 용접된 STS304L 용접접합부의 용접재(용착금속부) 내력과 파단 메카니즘을 조사하고자 한다. 주요변수인 하중방향에 대한 용접선의 배치에 따라 TFW(하중직각방향 용접), LFW(하중방향용접), FW (하중방향용접과 하중직각방향 용접조합)시리즈의 실험체를 제작하여 인장실험을 실시하였고, 각각 인장파단,전단파단, 블록전단파단(인장 파단과 전단파단의 조합)이 발생하였다. 동일 용접길이에 대해 TFW 시리즈의 접합부가 가장 높은 내력을 나타났으며, 현행기준식( KBC2016/AISC2010)과 기존 연구자의 식에 의한 예측내력과 비교한 결과, TFW와 LFW접합부는 과소평가되었고 FW실험체는 과대평가되었다 .실제 파단 위험단면과 블록전단파단 메카니즘을 고려한 내력식을 제안하였다.

This study focused on the ultimate behaviors(ultimate strength and fracture mode ) of single shear bolted connection with austenitic sainless steel(STS201) and curling effect on the ultimate strength using finite element analysis based on test results. Main variables are end distance in the parallel direction to loading and edge distance in the perpendicular direction to loading. The validation of finite element analysis procedures was verified through the comparisons of ultimate strength, fracture mode and curling(out-of-plane deformation) occurrence between test results and numerical predictions. Curling was observed in both test and analysis results and it reduced the ultimate strength of single- shear bolted connections with relatively long end distances. Strength reduction ratios caused by curling were estimated quantitatively by maximum 19%, 32%, respectively for specimens with edge distance, 48 mm and 60 mm compared with strengths of uncurled connections with restrained out-of-plane deformation. Finally, analysis strengths were compared with current design strengths and it is found that design block shear equations did not provide the accurate predictions for bolted connections with strength reduction by curling.

In this paper, block shear fracture behavior in base metal of fillet-welded connection fabricated with duplex stainless steel (STS329FLD) were investigated through experimental procedures. Main variables are weld lengths in the longitudinal and the transverse directions of applied force. As a result, test specimens failed by typical block shear facture (the combination of tensile fracture and shear-out fracture) in base metal not weld metal. Ultimate strength of the specimens tended to get higher with the increase of the weld lengths.

Recently, the use of duplex stainless steel which has a two-phase microstructure consisting of grains of ferritic and austenitic stainless steel has been increased in a variety of industrial fields. Especially, STS329FLD with lower nickel content and higher yield strength compared with austenitic stainless steel has been developed. In this paper, experiments have been conducted to investigate the structural behaviors of single shear duplex stainless steel(STS329FLD) bolted connection with four bolts. Specimens with relatively long end distance failed by block shear fracture accompanied with curling (out-of-plane deformation) and the curling reduced the ultimate strength.

This study investigates structural behaviors such as ultimate strength and weld metal fracture mechanism of carbon steel (SS400) fillet-welded connections with shielded metal arc welding (SMAW) through monotonic tensile test. Specimens of TFW series (transverse fillet weld against loading direction) and LFW series (longitudinal fillet weld) failed by tensile fracture and shear fracture, respectively in the weld metal of connections. Test strengths of specimens were compared according to welding direction and weld length.

This study focused on the ultimate strength and curling effect on the strength of single shear bolted connection with austenitic sainless steel (STS201) using finite element analysis. The validation of finite element analysis was verified through the comparisons of ultimate strength and fracture mode between existing test results and numerical predictions. Curling (out-of-plane deformation) was observed in both test and analysis and it reduced the ultimate strength of single shear bolted connections with relatively long end distances. Strength reduction ratio caused by curling was estimated quantitatively by maximum 19%, 32%, respectively for specimens with edge distance, 48mm and 60mm compared with strengths of uncurled connections with restrained out-of-plane deformation.

This paper deals with block shear fracture behavior in base metal of carbon steel welded connection. Monotonic tensile experiments have been conducted to investigate the structural behaviors of carbon steel fillet-welded connection with the block shear fracture in base metal. Main parameters are weld lengths in the longitudinal and transverse directions of applied force. Finite element analysis in this paper focused on the ultimate strength and fracture mode of welded connections. It was shown that predictions by finite element analysis method were in a good correspondence with test results for ultimate behaviors such as fracture mode and ultimate strength.

This study is to investigate the ultimate strength and curling influence of single shear two bolted connection with 7075-T6 aluminum alloys. The validation of element analysis was verified through the comparison between test result and finite element analysis prediction and strength reduction rate by curling was estimated quantitatively. Moreover, additional parametric analysis with extended variables was conducted and the conditions of curling occurrence according to end distance and edge distance were proposed.

This paper evaluated a stress for the girder reinforced by cross rib. As a result, The cross rib reduced the maximum and mnimum stress generated in girder because of evenly distributing the load.

Ultimate behaviors such as ultimate strength and fracture mechanism of fillet-welded connections with TIG(tungsten inert gas) welding have been investigated through test results. Main variables of specimens are weld length and welding direction against loading and ultimate strengths were compared according to the variables. Ultimate strengths were compared with current design predictions and modified design equations were proposed to consider the strength difference according to welding direction.

This study was performed to evaluate the cable tension of cable-stayed bridge by using vibration method and Lift-Off Test. As a result, cable tension by the vibration method and Lift-Off Test is most similar.

This study investigates the ultimate strength and curling influence in single shear bolted connection with 7075-T6 aluminum alloys using numerical approach. The applicability of finite element analysis was validated through the comparison between existing test results and numerical predictions. Curling was observed in some specimens with a relatively long end distance and reduced the ultimate strength of bolted connection. Strength reduction ratio by curling was estimated quantitatively and it is known that curling caused the strength reduction by maximum 21%.

Austenitic stainless steels have excellent corrosion resistance, durability, aesthetic appeal, fire resistance etc. compared with ferritic stainless steels and so especially 304 stainless steels have been utilized widely in the exterior member of building structure. In this paper, ultimate behaviors such as ultimate strength and fracture mechanism of fillet-welded connections with TIG(tungsten inert gas) welding have been investigated through test results. Main variables of specimens are weld length and welding direction against loading and ultimate strengths were compared according to the variables.

This paper is to investigate the stress-strain curves for STS 201 austenitic stainless steel over the full strain range. Ramberg-Osgood expression can be used to predict the stress-strain curve up to the 0.2% proof stress. Rasmussen and Shin have developed the approach for stress-strain curve of stainless steels beyond 0.2% proof stress based on the Ramberg-Osgood concept. However, for STS201 stainless steel, two existing concepts were not available for predicting the curves and therefore modified method was discussed in this paper.

이 연구는 어느 교사의 학교 차원의 수업개선 경험을 통해 교육개혁에 대한 시사점을 찾아보는데 목적을 두고 있다. 먼저 수업개선에 관심을 가지게 된 개인적 배경을 살펴본 다. 다음으로 개인적인 차원에서 수업개선을 위해 노력해 온 과정을 살펴본다. 그런 다 음 학교 차원의 수업개선을 해오는 과정에서 경험한 답답함과 딜레마, 그리고 자신에 대 한 반성과 변화된 점을 나눈다. 나아가 이 연구는 교사들의 참여와 협력을 교육개혁 성 공의 전제조건으로 본다. 이를 위해 교사들에게 ‘가르치는 자의 마음’을 불러일으킬 수 있는 시간을 마련해주고 학교를 수업중심으로 운영할 것을 제안한다.