This paper addresses failure modes of steel fiber coupling beams containing steel fiber. It shows that steel fiber of coupling beams efficiently controlled increase of crack width by bridge action.

This paper addresses analysis using vector2 program of steel fiber coupling beams containing steel fiber. It shows that steel fiber of coupling beams efficiently controlled increase of crack width by bridge action.

The purpose of this study is to investigate the characteristics of compressive strength and workability according to the NaOH and KOH addition method as powder of mortar which is made of Non-sintered binder for the reuse of resources and the CO2 reduction

The objective of this study is to investigated the compressive characteristics properties used cement paste containing Silica Fume Binder with elapsed curing time.

The objective of this study is to investigated the compressive characteristics properties used cement paste containing 30% blast furnace slag with curing days.

The objective of this study is to investigated the compressive characteristics properties used cement paste containing 20% fly ash with curing days.

Diagonally reinforced concrete coupling beam has complicated reinforcement details. To solve this problem, it is necessary to develop the alternative reinforcement details. The objective of this study is to investigate strain characteristics of coupled shear wall according to the replacement ratio of headed-bar.

The objective of this study is to investigate the influence of PVA Fiber on flexural yielding coupling beam. Test variable of this study is material type of coupling beam. Test results showed that coupling beam with PVA material experienced multiple micro craks.

Reinforced concrete coupled shear wall systems in medium and high-rise construction, where RC beams couple two or more RC walls have been frequently used. The objective of this study is to investigate seismic behavior of coupled shear wall according to the replacement ratio of headed-bar.

Hybrid coupled shear wall with steel coupling beam has often been used to resisting system of earthquake load and transverse load. This study addresses the strain characteristics of coupling beam in hybrid wall system.

In this study, the hydration heat of cementless mortar containing FGD gypsum is investigated experimentally. According to research results, it was found that using cementless binder is more convenient to apply to secondary product of concrete than ordinary portland cement.

In this study, KS F 2405 was used to investigated the compressive strength of property of high performance concrete (HPC) using the fly ash and silica fume. The experiments were carried out silica fume-binder ratio from 5% (SF5) and fly ash 25%+silica fume 5% (FA25SF5). The compressive strength of HPC determined on 7days and 28days.

This paper addresses the tensile strength of high performance concrete with fly-ash, silica fume. Test variables of this study is replacement ratio of admixture. Test results showed that 7 days tensile strength of specimen SF5 is higher than that of specimen FA25SF5. However, 28 days tensile strength of specimen SF5 and FA25SF5 had similar value.

The objective of this study is to investigate the elasticity of high performance concrete replacement blast furnace slag. Experimental variables of this study are modulus(100×100mm, 150×150mm). And test results were compared with existing equations.

In this study, KS F 2438 was used to investigated the modulus of elasticity of high performance concrete (HPC) of replacement fly ash, and test results were compared with existing equations. Korea, America and Japan have to use cylinder specimens by KCI(2011). However, in this study was used cubic specimens and the experimental variable of this study is size of cubic specimens.

As Concrete is construction materials which is unevenly mixed with cement, aggregate and water, compressive strength and modulus of elasticity is an important factor to seize movement of structures. The purpose of this study is to investigate a correlation compressive strength and modulus of elasticity according to the size of structures, and also to analyze and compare to prediction equation of many countries.

Reinforced concrete coupled shear wall systems in medium and high-rise construction, where RC beams couple two or more RC walls have been frequently used. The objective of this study is to investigate seismic performance of coupling beam with headed bar.

Coupling beams of coupled shear wall systems are often the most critical members in medium or high rise buildings subject to seismic load or wind loads. To ensure the survival of shear walls under high-intensity cyclic loading, these beams, which normally have limited dimensions, should possess high deformability and good energy absorption while being able to resist large shear force. Experimental work are conducted to illustrate the design of special RC coupling beams using the proposed procedure reinforcement details.

The coupling beams provide transfer of vertical forces between adjacent shear walls in coupled shear wall system, which creates a frame-like coupling action that resists lots of the total overturning moment induced by the wind load or seismic load. The purpose of this study is to investigate the strain characteristics performance of coupling beams with headed bar.

복합 병렬 전단벽(Coupled shear walls)은 커플링 보와 철근콘크리트 벽체로 구성되어 바람이나 지진 등의 횡하중으로부터 유발된 전도모멘트의 상당 부분을 철골 연결보의 커플링 작용에 의하여 골조 작용(Frame action)을 의하여 횡력에 효율적으로 저항하게 된다. 본 연구에서는 접합부 상세에 따른 복합병렬 전단벽의 접합부 강도에 대한 규준식을 정립하기 위한 선행연구로서 병렬 전단벽 접합부에서 커플링 보의 매립길이 및 벽체 두께를 주변수로 실험적 연구를 수행하여 접합부 상세에 따른 복합 병렬 전단벽 시스템의 거동특성을 규명하고자 하였다. 본 실험결과, 실험체의 거동 및 내력은 매립길이 및 접합부 상세에 많은 영향을 받는 것으로 나타났으며 향후 설계시 이에 대한 영향을 반영해야 할 것으로 판단된다.