Mineral carbonation is one of the safest permanent carbon dioxide sequestration methods. Carbon Capture & Utilization (CCU) is a process that utilizes available resources by removing carbon dioxide in a method of mineral carbonation. It can be applied to industries producing high carbon dioxide emissions. This study aims to investigate the absorption performance of carbon dioxide at high concentrations. Calcium hydroxide suspension was used as an absorbent. In addition, NaOH and Mg(OH)2 were used as additives. Carbon dioxide removal efficiency with NaOH increased from 30% to 90% when the additive amount was increased from 1wt% to 3wt%. In the case of Mg(OH)2, carbon dioxide absorption efficiency was minimal regardless of the additive amount. In addition, the solid byproducts werec onfirmed by X-ray diffraction spectra and SEM images.

Waste gasification can generate hydrocarbon gases that may be utilized for the synthesis of chemicals or liquid fuels, or for fuel cell power generation, if extensive, deep syngas cleaning is initially conducted. Conventional gas cleaning technology for such applications is expensive and may limit the feasibility of wet technology. Conventional cold gas cleanup (scrubbing by solvents) technique needs the temperature of raw waste gasification gas ranging from 900 to 1600℃ reduced to room temperature. Then, the cleaned - up syngas needs to be reheated. Obviously, the process is energetically inefficient. It is the objective of this study to economically meet the most stringent cleanup requirements without reheating syngas for these applications. We investigated the temperature and pressure effect in breakthrough performance of various sorbents for desulfurization and de-chlorination. Based on the results obtained during the desulfurization (Fe₂O₃, Fe₃O₄, ZnO) and the dechlorination (Na₂CO₃, NaHCO₃, Na₂O) screening tests, ZnO and Na₂O were selected as preferred optimum sorbents. H₂S breakthrough time corresponds to an effective capacity of approximately 11 g Cl/100 g of material. Also, HCl, breakthrough time corresponds to an effective capacity of approximately 5 g Cl/100 g of material. ZnO and Na₂O at high temperature of around 550℃ display high sorption performance and removal efficiency for waste syngas along with H₂S and HCl. Although there is an issue of CO₂ recovery in warm gas clean-up technology for desulfurization, we have obtained an interesting new alternative warm gas clean-up system with heat budget merit.

This work presents an experimental study of the influence of lifting velocity on cake formation during filtration. For design of hot gas cleanup system using ceramic filter reactor, the most important consideration is coating conditions of sorbent in filter surface (for example : lifting velocity, coating weight of sorbent, pulsing interval and removal effect for dechlorination and desulfurization). We studied the optimum operation condition as paticle size and lifting velocity using a ceramic filter reactor at 550oC. Based on the results obtained during cold and hot test, optimum lifting velocity in a ceramic filter reactor was selected 0.68 m/s. Also, the removal behaviour of the ceramic filter during filtration was studied using differential pressure. Optimum removal efficiency for dechlorination and desulfurization accomplished at differential pressure condition over 74 mmH2O.

We investigated the effect of temperature and pressure in breakthrough performance of various sorbents for dechlorination and desulfurization. Based on the results obtained during the desulfurization (Fe2O3, Fe3O4, ZnO) and the dechlorination (Na2CO3, NaHCO3, trona) screening tests, ZnO and trona were selected as preferred optimum sorbents. H2S breakthrough time corresponds to an effective capacity of approximately 11 g H2S/100 g of sorbent. Also, HCl breakthrough time corresponds to an effective capacity of approximately 5 g HCl/100 g of sorbent. ZnO and trona at high temperature of around 550oC display high sorption performance and removal efficiency for synthsis gas from waste gasification. Although there is an issue of CO2 recovery in hot gas cleanup technology for desulfurization, we have obtained an interesting new alternative hot gas cleanup system with heat budget merit.