We report a highly sensitive NO2 gas sensor based on multi-layer graphene (MLG) films synthesized by a chemical vapor deposition method on a microheater-embedded flexible substrate. The MLG could detect low-concentration NO2 even at sub-ppm (<200 ppb) levels. It also exhibited a high resistance change of ~6% when it was exposed to 1 ppm NO2 gas at room temperature for 1 min. The exceptionally high sensitivity could be attributed to the large number of NO2 molecule adsorption sites on the MLG due to its a large surface area and various defect-sites, and to the high mobility of carriers transferred between the MLG films and the adsorbed gas molecules. Although desorption of the NO2 molecules was slow, it could be enhanced by an additional annealing process using an embedded Au microheater. The outstanding mechanical flexibility of the graphene film ensures the stable sensing response of the device under extreme bending stress. Our large-scale and easily reproducible MLG films can provide a proof-of-concept for future flexible NO2 gas sensor devices.

In vivo nicotine is associated with Alzheimer's, Parkinson's and lung cancer. Diagnostic assays of these diseases depend on very low analytical detection limits. In this study, a sensitive analytical method was examined using a voltammetric graphite pencil electrode (GPE) and a modified carbon nanotube paste electrode (CNE). The optimum analytical conditions for both electrodes were compared using square wave anodic stripping voltammetry (SW) and cyclic voltammetry (CV) obtaining 400 sec accumulation time and oxidation peak. Under optimum parameters, the stripping working range of GPE was 5.0-40.0μg/L, CNE: 0.1-0.8 and 5-50μg/L. Quantification limits were 5.0μg/L for GPE and 0.1μg/L for CNE, while detection limits were 0.6μg/L for GPE and 0.07μg/L for CNE. A standard deviation of 10.0μg/L was observed for 0.064 GPE and 0.095 CNE (n = 12) using 400 sec accumulation time. The results obtained can be applied to non.treated urine and ex vivo biological diagnostics.

It has been reported that light-emitting diodes(LED) can be used in the treatment of oral diseases. Although bio-stimulatory effects of LED irradiation such as promotes stimulation of wound healing have been well known, there are few reports about molecular mechanism associated with cell cycle by LED irradiation. The purpose of present study was to examine the molecular event in cell cycle of LED irradiation on primary human gingival fibroblast(hGF) in vitro. The source of light for irradiation was a continuous-wave LED emitting at a wavelength of 635nm, and manufactured that energy density was 5mW/cm2 on sample surface. The hGF were irradiated for 1 hour at 37℃ in 5% CO2 humidified chamber. Experimental samples were acquired at 0 (right after irradiation), 8 and 24 hour after irradiation. To investigate the molecular mechanisms associated with cell cycle, growth phase was determined by flow cytometry and mRNA expression of cyclin A, cyclin B, cyclin D1, cyclin E, cdc2, PCNA, p18, p27, p21, and p53 were determined by real time RT-PCR. Flow cytometric analysis demonstrated the percentage of cells in the G1 and S phase were decreased, but the G2 phase increased, which showed cells irradiated by LED were transitioned from S to G2 phase. For mRNA expression, cyclin B, cdc2, PCNA and p53 were increased at 0 hour after irradiation, and most of cell cycle molecules were increased at 8 hour after irradiation. At 24 hour after irradiation, cyclin A, cyclin E, PCNA and p18 were increased. Taken together, LED irradiation induced proliferation of hGF cells through transition from S to G2 phase.

The purpose 01' pl'esent study was to examine the molecular events in apoptosis by CoCl2, mimicking hypoxic cond ition and recovering effects by LED ir l'adiation on Human SH-SY5Y neuroblastoma cells The SOUl'ce 0 1' light for ir l'adiation was a continuous-wave LED emitting at a wavelenl양h of 590 nm, and manufactured that ene rgy density was 5 mW!cm2 on sample surface, After ir l'adiation, cell viabi lity was measured with BrdU , cell morphol ogy was examined with Diff- Quik staining, cell signaling was monitored with various apoptosis-related molecules using RNase Pl'otection Assay(RPA) , W11en treated with CoC12, apoptotic induction was found in the SH-SY5Y cells in a concentration-dependent and time-dependent manner , Diff-Quik s taining was revealed that DNA fragmentation re presented apoptosis was examined in CoC12-tl'eated group, Moreover, RPA assay of SH-SY5Y cclls lIs ing val'iolls apoptosis-related molecllles showed that the apoptotic cell population was mcreased J-loweve. there was sorne signifïcant change in LED irradiatied cells aftel' treatement of CoC12 The main mechanism for Lhese a poptosis appearecl to be mito c hondriεt - m ecliated pathway, such as cytochrome- c‘ caspase-9, caspase-3, pro-apototic protein ßax, anti-apototic protein Bcl-2, and death receptor• mediated pathway, such as Fas, cas pase- 8, a ncl TNFRl These results demonstrate that CoCI2 induce apoptosis in SH-SY5Y via different dual apop tosis pathway through death receptor pathway as well as mitochondria- dependent pathway and LED irradiation can recl llces the CoCl2-induced apoptosis by blocking their internal signaling pathway

Hopyeongbyeo is an anther culture derived Japonica rice (Oriza sativa L.) cultivar from the cross between Hitomebore and Hwajinbyeo by the rice breeding team of Honam Agricultural Research Institute (HARI), NICS, RDA, in 2003. This cultivar has a about 126 days growth duration from transplanting to harvesting. The short and round grain shape of Hopyeongbyeo is translucent with non-glutinous endosperm. Amylose content of rice grain is about 17.8% and high palatability of cooked rice compared with Nampyeongbyeo. This cultivar shows resistant to bacterial blight pathogenes of K1. The milled rice yield of Hopyeongbyeo is about 5.13MT/ha at ordinary transplanting culture in the local adaptability test. Hopyeongbyeo would be adaptable for the southern plain area of Korea.

Polycyclic aromatic hydrocarbons (PAHs) are a major concern because of their potential mutagenic and carcinogenic risks to human beings. One of these harmful, yet commonly observed PAHs is pyrene. Pyrene is one of the 16 PAHs listed by the United States Environmental Protection Agency as priority pollutants. The purposes of this research are to develop a method of pretreatment for PAH contaminants prior to a typical biological treatment and to demonstrate the biodegradablity of these compounds. Since pyrene is non-polar, hexane was chosen as a solvent to effectively dissolve pyrene. Pyrene solutions were treated with ozone, as it has high oxidation capacity and electrophilic character. The intermediates and byproducts of pyrene were dissolved in alkaline water at pH 11.4 and neutralized to test for BOD5, COD, and toxicity. These solutions were further ozonated and assessed of biodegradability. The first-order rate constant ko was found to be between 0.121day-1 and 0.081 day-1, depending on the duration of reozonation. The BOD5/COD ratio was found to 0.66. The toxicity test showed that after 10 min of reozonation time, the byproducts and intermediates of pyrene were within the non-toxic range of ± 10% inhibition for E-Coli bacteria.