Mesocrystals are macroscopic structures formed by the assembly of nanoparticles that possess distinct surface structures and collective properties when compared to traditional crystalline materials. Various growth mechanisms and their unique features have promise as material design tools for diverse potential applications. This paper presents a straightforward method for metal–organic coordination-based mesocrystals using nickel ions and terephthalic acid. The coordinative compound between Ni2+ and terephthalic acid drives the particle-mediated growth mechanism, resulting in the mesocrystal formation through a mesoscale assembly. Subsequent carbonization converts mesocrystals to multidirectional interconnected graphite nanospheres along the macroscopic framework while preserving the original structure of the Ni-terephthalic acid mesocrystal. Comprehensive investigations demonstrate that multi-oriented edge sites and high crystallinity with larger interlayer spacing facilitate lithium ion transport and continuous intercalation. The resulting graphitic superparticle electrodes show superior rate capability (128.6 mAh g− 1 at 5 A g− 1) and stable cycle stability (0.052% of capacity decay per cycle), certifying it as an advanced anode material for lithium-ion batteries.

곤충병원성 선충인 Heterorhabditis. megidis(큰형광병원선충)는 참나무 군락지(광주광역시 소재) 사양토에 서 분리 동정되었고, 곤충병원성을 가지는 공생세균은 Photorhabdus temperata로 분리 동정되어 각각 GJ1-2로 명명하였다. H. megidis GJ1-2는 고구마(주황미) 큰 검정풍뎅이 Holotrichia parallela에 대한 방제 효과는 평택시 (경기도 소재)와 논산시(충청북도 소재)의 노지 재배 사양토에서 관주처리 30일 후 각가 81.1%, 78.9%로 나타났 으며, 인삼(재래종) 거세미나방 Agrotis segetum에 대한 방제 효과는 이천시(경기도 소재)와 청주시(충청북도 소재)의 비가림 재배(차광막 설치) 사양토에서 관주처리 14일 후 방제가는 각각 79.9%, 80,2%로 나타났다. H. megidis GJ1-2는 고구마(주황미)와 인삼(재래종)에서 약제 처리 후 3, 7, 14일 후 외관상 약해는 나타나지 않았다.

본 연구는 대한민국 울릉도 특산식물인 추산쑥부쟁이(Aster × chusanensis Y.S.Lim, Hyun, Y.D.Kim & H.C.Shin)의 기내 대량증식체계 확립을 위해 시토키닌 계열 식물생장조절 제를 첨가하여 캘러스 및 신초 형성 조건을 구명하고자 수행 하였다. 실험결과, 추산쑥부쟁이의 줄기 절편체에서 캘러스 와 신초가 형성되었다. 캘러스 형성률은 TDZ 3.0mg·L-1처 리구에서 88.9%로 가장 높았고 BAP 3.0mg·L-1와 Zeatin 3.0mg·L-1 처리구는 66.7%, 2iP 3.0mg·L-1 처리구에서는 11.1%였다. 신초 형성률은 모든 처리구에서 77% 이상이고 특히 TDZ처리구와 Zeatin 처리구에서 100%였다. 그러나 TDZ처리구에서는 형성된 신초가 부풀어 오르거나, 잎에 과수 성이 나타나는 등 형태적 기형이 나타났다. Zeatin처리구에 서 발생한 신초는 정상적인 형태를 나타났다. 잎 절편체에서 는 캘러스, 신초가 발생하지 않았으며 절편체가 탈색하며 고 사하는 것을 확인하였다. 종합적으로 추산쑥부쟁이의 캘러 스 및 신초 형성을 위해서는 줄기 절편체를 배양 재료로 이 용하는 것이 효과적으로 확인되었다. 캘러스 유도에는 TDZ 3.0mg·L-1처리가 가장 효과적이었고, 추후 NAA와 같은 옥신 을 함께 첨가하여 증식 효과를 분석하는 연구가 필요할 것이 다. 또한, 신초 유도에도 TDZ 3.0mg·L-1 처리가 효과적이었 으나 장기간, 고농도로 사용할 경우 형태적인 기형이 발생할 수 있어 정상적인 식물생산에 부적합한 것으로 확인되었다. 따라서 형태적 기형이 발생하지 않은 아데닌 유도체형 시토키 닌인 Zeatin을 활용하는 것을 추천한다. 본 연구는 울릉도 특 산식물인 추산쑥부쟁이의 기내 대량증식과 생태계 유지에 필 요한 종 공급을 위한 대량증식 체계 구축을 위한 자료로 활용 할 수 있을 것이다.

곤충병원성 선충인 Heterorhabditis. megidis(큰형광병원선충)는 참나무 군락지(광주광역시 소재) 사양토에 서 분리 동정되었고, 곤충병원성을 가지는 공생세균은 Photorhabdus temperata로 분리 동정되어 각각 GJ1-2로 명명하였다. H. megidis GJ1-2는 고추(녹광), 애호박(농우), 오이(백다다기), 참외(금싸라기), 토마토(베타티니) 유묘기 경엽처리와 배추(씨알천하일품), 상추(진청맛), 완두(청진주), 수박(삼복꿀), 무(서호) 유묘기 관주처리 에서 21일차까지 기준량과 배량에 대하여 약해(약해 판정기준결과: 0)가 나타나지 않았다, H. megidis GJ1-2는 배추 파밤나방에 대한 방제 효과는 이천시(경기도 소재)와 수원시(경기도 소재)의 시설재배 포장에서 각각 경엽 처리 3일차 71.8%. 73.9%, 7일차 86.2%, 84.6%로 나타났으며, 옥수수 열대거세미나방에 대한 방제 효과는 제주시 (제주특별자치도 소재)의 노지(미사질 양토)에서 경엽처리 7일차 82.6%로 나타났다. 그리고 H. megidis GJ1-2는 랫드를 이용한 급성경구와 급성경피 독성시험 반수치사농도(LD50) 값은 2,000 mg/kg B.W 초과로 IV급(저독성) 으로 구분되었고, 토끼를 이용한 피부와 안점막에 자극성이 없는 것으로 구분되었다. 그리고 담수어류(송사리) 에 대한 급성독성시험 반수치사농도(LD50) 값은 영향을 미치지 않는 기초시험농도 100 mg/L를 초과하였다.

This study aimed to develop a new eco-friendly control method of B. tabaci using a trap plant treated with systemic insecticide. Due to high preference, tobacco plant was selected as a trap plant among solanaceous plants. Out of all 6 systemic insecticides, dinotefuran WG showed the highest mortality (> 97.3 %) against B. tabaci. The concentrations of dinotefuran in tobacco leaves after systemic treatment showed the sharp increase in the pesticide from 2 hrs until 48 hrs (2 d) and steady increase over 35 d. The mortality of B. tabaci in tobacco leaves was about 80% at 9 hrs after treatment and over 90% at 1, 2, 3, 6, 9, and 35 d after treatment. The number of B. tabaci was counted every week after dinotefuran-treated tobacco pots were placed in the tomato greenhouse cultivation. The density of the insects with 3 tobacco plants was app. 75% lower than the control (w/o tobacco plant).

Callipogon relictus, a natural monument, is an insect whose life cycle was assumed to take more than 5 years in nature. Winter is a very harsh season, but it is known to be a crucial condition for many insects’ growth. However, no information is known about the overwintering condition and its effects on C. relictus. To understand the overwintering effects on the growth of C. relictus, we investigated the growth patterns of its larvae in indoor conditions after chilling treatment. The larvae were induced to dormancy at low temperature (4°C) for two months, and put them into 10°C for two weeks to break dormancy. After awakening, the temperature was increased 15°C, 20°C to 25°C at a time, and the larvae were kept for two weeks at each temperature. The larvae were divided into 3 groups (3rd to 5th instar, 6th to 8th instar, 9th to last instar). Lastly, head width and weight of the larvae were measured every 30 days under 25°C condition, and mortality and deformity were counted as well. The mortality and deformity rates were the highest in the first group, and the rates decreased toward the last group. On the other hands, growth rate appeared opposite to mortality and deformity rate of each larval group.

As various accidents have occurred in underground spaces, we aim to improve the quality validation standards and methods as specified in the Regulations on Producing Integrated Map of Underground Spaces devised by the Ministry of Land, Infrastructure and Transport of the Republic of Korea for a high-quality integrated map of underground spaces. Specifically, we propose measures to improve the quality assurance of pipeline-type underground facilities, the so-called life lines given their importance for citizens’ daily activities and their highest risk of accident among the 16 types of underground facilities. After implementing quality validation software based on the developed quality validation standards, the adequacy of the validation standards was demonstrated by testing using data from two-dimensional water supply facilities in some areas of Busan, Korea. This paper has great significance in that it has laid the foundation for reducing the time and manpower required for data quality inspection and improving data quality reliability by improving current quality validation standards and developing technologies that can automatically extract errors through software.

Solid state grain growth (SSCG) is a method of growing large single crystals from seed single crystals by abnormal grain growth in a small-grained matrix. During grain growth, pores are often trapped in the matrix and remain in single crystals. Aerosol deposition (AD) is a method of manufacturing films with almost full density from nano grains by causing high energy collision between substrates and ceramic powders. AD and SSCG are used to grow single crystals with few pores. BaTiO3 films are coated on (100) SrTiO3 seeds by AD. To generate grain growth, BaTiO3 films are heated to 1,300 oC and held for 10 h, and entire films are grown as single crystals. The condition of grain growth driving force is ΔGmax < ΔGc ≤ ΔGseed. On the other hand, the condition of grain growth driving force in BaTiO3 AD films heat-treated at 1,100 and 1,200 oC is ΔGc < ΔGmax, and single crystals are not grown.

This study aimed to examine the effect of a mild elevation in serum cholesterol level in a porcine coronary overstretch restenosis model using a balloon angioplasty catheter or drug-eluting coronary stent. Pigs were divided into two groups and were fed a commercial normal diet (CND, n = 4) or a high-fat diet (HFD, n = 4) for 5 weeks. Coronary overstretch injury by balloon angioplasty or stent implantation was induced in the left anterior descending and left circumflex artery after 1 week of feeding. Histopathological analysis was performed at 4 weeks after coronary injury. During the experiment, the total cholesterol level in the HFD group increased by approximately 44.9% (from 65.9 ± 3.21 mg/dL at baseline to 95.5 ± 9.94 mg/dL at 5 weeks). The lumen area in the CND group was reduced in comparison with that in the HFD group after balloon angioplasty. After stent implantation, the injury score showed no significant difference. There were significant differences in the neointimal area (2.7 ± 0.33 mm2 in the CND group vs. 3.3 ± 0.34 mm2 in the HFD group, p<0.05), lumen area (2.6 ± 0.54 mm2 in the CND group vs. 2.0 ± 0.33 mm2 in the HFD group, p<0.05), and percent area stenosis (52.0 ± 7.96% in the CND group vs. 62.4 ± 5.15% in the HFD group, p<0.05). Body weight change was not different between the two groups. Increased serum cholesterol level activated vascular smooth muscle cell proliferation in the porcine coronary overstretch model.