본 연구에서는 고투과성 및 높은 염 제거율을 가지는 역삼투막의 성능향상을 위하여 다양한 첨가제 및 계면중합 시 경화 온도 및 시간에 따른 특성평가에 대한 연구가 수행되었다. 첨가제가 없는 막과 첨가제를 첨가한 막의 모폴로지는 모 두 “ridge-and-valley” 구조를 나타내어, 폴리아미드 층이 다공성 지지층 표면에 성공적으로 중합되었음을 확인하였다. 또한 2-Ethyl-1,3-hexanediol (EHD) 첨가함으로써 향상된 친수성과 수투과율 가졌으며, 이는 접촉각 측정을 통해서 확인되었다. 최 종적으로 97.78%와 98.7%의 NaCl 및 MgSO4 제거율과 3.31 L/(m2⋅h⋅bar)의 높은 수투과율을 가진 고투과성 계면중합막을 제조하였다.

본 연구는 대한민국 울릉도 특산식물인 추산쑥부쟁이(Aster × chusanensis Y.S.Lim, Hyun, Y.D.Kim & H.C.Shin)의 기내 대량증식체계 확립을 위해 시토키닌 계열 식물생장조절 제를 첨가하여 캘러스 및 신초 형성 조건을 구명하고자 수행 하였다. 실험결과, 추산쑥부쟁이의 줄기 절편체에서 캘러스 와 신초가 형성되었다. 캘러스 형성률은 TDZ 3.0mg·L-1처 리구에서 88.9%로 가장 높았고 BAP 3.0mg·L-1와 Zeatin 3.0mg·L-1 처리구는 66.7%, 2iP 3.0mg·L-1 처리구에서는 11.1%였다. 신초 형성률은 모든 처리구에서 77% 이상이고 특히 TDZ처리구와 Zeatin 처리구에서 100%였다. 그러나 TDZ처리구에서는 형성된 신초가 부풀어 오르거나, 잎에 과수 성이 나타나는 등 형태적 기형이 나타났다. Zeatin처리구에 서 발생한 신초는 정상적인 형태를 나타났다. 잎 절편체에서 는 캘러스, 신초가 발생하지 않았으며 절편체가 탈색하며 고 사하는 것을 확인하였다. 종합적으로 추산쑥부쟁이의 캘러 스 및 신초 형성을 위해서는 줄기 절편체를 배양 재료로 이 용하는 것이 효과적으로 확인되었다. 캘러스 유도에는 TDZ 3.0mg·L-1처리가 가장 효과적이었고, 추후 NAA와 같은 옥신 을 함께 첨가하여 증식 효과를 분석하는 연구가 필요할 것이 다. 또한, 신초 유도에도 TDZ 3.0mg·L-1 처리가 효과적이었 으나 장기간, 고농도로 사용할 경우 형태적인 기형이 발생할 수 있어 정상적인 식물생산에 부적합한 것으로 확인되었다. 따라서 형태적 기형이 발생하지 않은 아데닌 유도체형 시토키 닌인 Zeatin을 활용하는 것을 추천한다. 본 연구는 울릉도 특 산식물인 추산쑥부쟁이의 기내 대량증식과 생태계 유지에 필 요한 종 공급을 위한 대량증식 체계 구축을 위한 자료로 활용 할 수 있을 것이다.

Molten Salt Reactor (MSR) is one of the 4th generation nuclear power systems which is its verified technology in physically and chemically. Among the various salts used for MSR system, the eutectic composition of NaCl-MgCl2 system maintains the liquid state at around 450°C, in the same time, it has high solubility for nuclear fuel chlorides. This characteristic has high advantage for lowering the operating temperature for the MSR, which could reduce the problem of hightemperature corrosion by salt for structural materials significantly. In particular, since MgCl2 has the similar standard reduction potential with nuclear fuel, is used as a surrogate for, many basic researches have been conducted for verifying characteristic of MgCl2. It is well-known that main short-advantage of MgCl2 is hygroscopic properties. MgCl2 changes to MgCl2-xH2O state easily by absorbing moisture in air condition. The hydrated MgCl2 is producing MgOHCl by thermally decomposing at high temperature, the formed MgOHCl corrodes structural materials, even small amount of MgOHCl gives significant damage. Therefore, the purification of MgCl2 has been required for long-term operation of MSR using MgCl2 as a base salt. In this study, the purification of eutectic composition salt for NaCl-MgCl2 has been mainly performed by considering its thermodynamic properties and electrochemical characteristic, and the experimental results have been discussed.

본 연구에서는 현탁중합을 통해 이온교환입자를 합성하였다. 또한 음이온 교환막을 제조하기 위해 brominated poly(phenylene oxide) (Br-PPO)로 교환막 합성을 진행하였으며, 합성한 이온교환입자를 Br-PPO에 첨가하여 음이온 교환막 에 성능을 향상시키고자 하였고, 이를 적용하여 음이온 교환막 연료전지 시스템의 성능 평가를 진행했다. 이온교환입자는 FT-IR, TGA 및 UTM을 통해 구조 분석, 열적 기계적 특성을 평가하였다. Br-PPO는 NMR을 통해 화학적 구조 분석 및 합성 여부를 확인하였고, 음이온 교환막 연료 전지 셀 테스트를 진행하기 전 이온전도도와 이온교환용량, 팽윤도 및 수분함수율을 측정해 연구되고 있는 다른 음이온 교환막들과 비교를 통해 성능을 평가했다. 최종적으로 가장 성능이 우수했던 이온교환입 자를 0.7 wt%를 첨가한 Br-PPO-TMA- SDV 음이온 교환막을 연료전지 시스템에 도입하여 상용 막인 FAA-3-50과 성능을 비 교했다.

In this study, the behavior of densification of copper powders during high-pressure torsion (HPT) at room temperature is investigated using the finite element method. The simulation results show that the center of the workpiece is the first to reach the true density of copper during the compressive stage because the pressure is higher at the center than the periphery. Subsequently, whole workpiece reaches true density after compression due to the high pressure. In addition, the effective strain is increased along the radius during torsional stage. After one rotation, the periphery shows that the effective strain is increased up to 25, which is extensive deformation. These high pressure and severe strain do not only play a key role in consolidation of copper powders but also make the matrix harder by grain refinement.

In this study, porous titanium samples were manufactured by space holder methods using two kinds of urea and sodium chloride space holders. Three-dimensional pore structures were obtained by a computed-tomography (CT) tech- nique and utilized for finite element analysis in order to investigate the mechanical properties. The CT-based finite ele- ment analyses were in better agreement with the experimental results than unit cell model-based analyses. Both the experimental and CT-based results showed the same tendency that the elastic modulus decreased with increasing the porosities. The total porosity of the bulk body plays a key role in determining the elastic modulus of porous materials.

Stress-strain curves are fundamental properties to study characteristics of materials. Flow stress curves of the powder materials are obtained by indirect testing methods, such as tensile test with the bulk materials and powder compaction test, because it is hard to measure the stress-strain curves of the powder materials using conventional uniax- ial tensile test due to the limitation of the size and shape of the specimen. Instrumented nanoindentation can measure mechanical properties of very small region from several nanometers to several micrometers, so nanoindentation tech- nique is suitable to obtain the stress-strain curve of the powder materials. In this study, a novel technique to obtain the stress-strain curves using the combination of instrumented nanoindentation and finite element method was introduced and the flow stress curves of Fe powder were measured. Then obtained stress-strain curves were verified by the com- parison of the experimental results and the FEA results for powder compaction test.

The aim of this study is to find out histomorphologic change and cellular activity of condyle resulted from unilateral mastication by comparison of cell proliferation and apoptosis activity. 30 adult rats were dived to 15 experimental group and 15 control group randomly. Right upper and l ower molars were gently extracted in experimental group, to make unilateral mastication environment. All subjects were sacrificed at 1 week, 2 weeks and 4 weeks by chloroform, and their tissues were prepare to observation. Streptovidin-biotin system for BrdU stanning, was used to determine cellular proliferative activity. TUNEL method was used to determine apoptotic activity. The result for cellular activity was recorded at both of anterior portion and posterior portion of condyle. Hematoxylin and Eosin stanning was used for histiomorphological change. The results were as follows. There were more change in superficial layer than deep layer of condyle in cellular activity. In anterior portion of condyle cartilage, cellular proliferative activity of experimental group was lower than control group and apoptotic activity of experimental group was higher than control group. And apoptotic activity of extracted side in experimental group is the most. In posterior portion of condyle cartilage, cellular proliferative activity of extracted side in experimental group was higher than non-extracted side and control group, And apoptotic activity of extracted side in experimental group was the low. As a result of histomorphological change, there was hyperplasia in posterior region o f extracted side c ondyle i n experimental g roup, but t here was n o change i n unextracted side i n experimental group. There was histomorphological hyperplasia in posterior condyle of experimental group as results of high cellular proliferative activity. There was mainly apoptotic change of anterior portion condyle in experimental group. But there was no histomorphologic change. In other words, there was hyperplasia by increasing of cellular proliferative activity in posterior portion of nonfunctional side condyle. In functional side condyle, there was no histomorphological change in functional condyle, but there was change in cellular activity.