Abstract Purpose : This study sought to find ways to improve awareness and ethics of opticians' code of ethics. Methods : A survey was conducted on 102 Korean opticians to investigate the awareness and performance satisfaction of the optician's code of ethics, as well as differences according to gender, age, education level, work experience, and workplace. Results : This study found no gender-based differences in opticians’ awareness and satisfaction with the code of ethics. However, age and education significantly influenced these factors, with higher levels observed among opticians in their 20s and 30s, particularly those in the early stages of their careers. Furthermore, a positive correlation was noted between education level and both awareness and satisfaction. The study revealed that opticians with volunteer experience exhibited higher awareness and satisfaction with the code of ethics than those without. This suggests that volunteering, which fosters professional identity and social responsibility, influences opticians’ ethical awareness. Additionally, groups with a strong interest in foreign languages and self-development demonstrated higher ethical awareness and satisfaction. Conclusion : This study underscores the need for enhanced ethical awareness among opticians. It advocates for the development of methods, case studies, and guidelines to address ethical issues not covered by the existing code, thereby revitalizing ethical practices in the profession. In addition, it is judged that active promotion and education on the code of ethics and professional ethics are necessary for the continuing education of opticians. Key words : Awareness, Code of ethics, Performance satisfaction

최근 정원에 대한 관심이 증가함에 따라 자생 식물을 활용 하기 위한 연구가 진행되고 있다. 참식나무(Neolitsea sericea (Blume) Koidz).는 관상용뿐만 아니라 목재로도 이용할 수 있 다. 따라서 이 연구는 참식나무를 정원 식물 소재로 활용하기 위한 대량 증식 기술 개발을 위하여 종자의 발아 특성과 저장 특성에 대해 알아보고자 진행하였다. 2022년 11월 2일 제주 지역에서 채집한 종자를 실험에 사용하였다. 종자의 내·외부 형태 관찰을 한 결과, 종자가 탈리되는 시점에 배가 완전히 발 달한 형태를 가지고 있기 때문에 형태적휴면(morphological dormancy, MD)이 없음을 확인할 수 있었다. 수분흡수 실험 을 통하여 참식나무 종자는 72시간 이후 40% 정도의 수분흡수 율을 보여 내과피의 불투성에 의한 물리적휴면(PY, physical dormancy)이 없는 것으로 판단하였다. 채종 후 곧바로 무가 온 온실에 파종하면 이듬해 5월에 약 60%가 발아하였다. 저 온습윤처리 0, 2, 4, 8, 12주 후 25/15°C에 배양한 결과 최 종 발아율은 각각 0%, 0%, 21.1%, 32.6%, 34.7%였다. GA3 를 0, 10, 100, 1000mg·L-1 농도로 처리한 후 25/15°C에서 배양한 결과, 최종 발아율은 각각 0, 14.5, 22.7, 42.2%였다. 따라서 본 실험의 결과 8주 이상의 저온 처리 또는 GA3 처리 를 통하여 어느 정도 휴면을 타파시킬 수 있었다. 이러한 결과 를 통하여 종자는 intermediate PD를 가지는 것으로 판단 된다. 일부 발아하지 않은 종자는 deep PD를 가지고 있는 것 으로 판단하였다. 후숙 처리 실험의 결과 4주 만에 수분 함량 이 2% 이하로 감소하였고 종자는 전혀 발아하지 않았다. 따라 서 종자의 저장 특성 중 recalcittrant 특성을 지닌 난저장성 종자로 보인다.

본 연구는 국내에서 실내 관상용으로 많이 활용되는 스킨답 서스의 실내재배 시 적정 인공광원, 수경재배 전기전도도 농 도 및 용토를 선발하기 위하여 수행하였다. 실내재배 시 인공 광원은 형광등, 적청 LED, 백색 LED로 처리하였다. 수경재배 시 양액 농도는 EC 1.2, 1.6, 2.0ds·m-1 수준으로 하였고, 재 배용토는 제올라이트, 코코피트, 펄라이트, 황토볼 4가지로 달리하였다. 스킨답서스의 실내 재배 시 줄기 길이는 형광등 과 적청 LED 처리보다 백색 LED 처리에서 길어졌다. 잎의 크기는 적청 LED 처리에서 형광등과 백색 LED 처리보다 커 지는 경향이었다. 엽록소 지수값은 백색 LED>적청 LED>형광 등 순으로 높았다. 수경재배 시 스킨답서스의 줄기길이는 EC 농도가 높아질수록 길어지는 경향이었고, 용토별로 비교하면 제올라이트와 코코피트에서 높은 경향이었다. 엽록소 지수값 도 EC 농도와 비례하여 높아졌고, 용토별로는 제올라이트와 코코피트에서 높았다. 스킨답서스의 생체중도 EC 농도가 높 을수록 높았고, 제올라이트와 코코피트에 높은 경향이었다. 상기 결과들을 종합할 때, 스킨답서스의 NFT를 이용한 실내 재배 시 적정 인공광원으로는 백색 LED를, 수경재배 양액의 농도는 EC 1.6∼2.0ds·m-1를, 그리고 NFT 용토는 제올라이 트나 코코피트가 적합하다는 것을 알 수 있었다.

The PRIDE scale mechanical decladder is decladding apparatus for separating and recovering fuel material and cladding hull by horizontally slitting rod-cut. In order to enhance mechanical decladdng efficiency, the main requirements were considered as follows. Decladding of the fuel rods may be performed by rotation of three circular cutting blades inserted among the rollers arranged at 120° portion. In a mechanical decladder, a slitting assembly as a unit for slitting the cladding tube may include cutting blades for slitting and rollers for guiding extrusion of the cladding tube. Rotation of the cutting blades may be caused by the fuel rods being extruded from a plurality of rollers. Slitting intervals of rod-cuts having different diameters may be controlled by adding or removing a spacing plate between the cutting blade and a ranch bolt for fixing the slitting blade to the slitting assembly. An extrusion velocity with respect to the fuel rods may be controlled by a hydraulic pressure applied to the fuel rods. A force for cutting the fuel rods may be adjusted by controlling steel plates. Forces applied to a plurality of rollers may be generated by the hydraulic cylinder. The hydraulic pressure may be controlled by hydraulic pressure controller. The PRIDE scale mechanical decladder mainly consists of auto feeding module, hydraulic cylinder module and blade module. A load cell was installed between the hydraulic cylinder and the extrusion pin to measure the decladding force and slitting velocity, and a data acquisition system capable of obtaining data by using the RSC 232 was constructed. Also, the control panel can control the forward and backward movement of the extrusion pin, the hydraulic flow rate, and the hydraulic velocity. In the mechanical decladding test, 40 pieces of simulated rod-cuts were loaded in two auto feeding basket and slit by utilizing the 3-CUT blade modules in the housing, and hulls and simulated pellets were collected in the collection container. As a result, 80 pieces of simulated rodcut (brass pellets + Zry4 tube) were slit continuously without any problem. About 35 min was required to slit 80 rod-cuts and average decladding force was 260 kg. The decladding force of the ceramic simulated rod-cuts (castable) requires 25 kg less force than the brass pellets. Therefore, it is estimated that the spent fuel rod-cut can be fully split into three pieces using the mechanical decladder.

As the consumption of corn increases, the production of by-products is also increasing. In this study, functional substances and antioxidant activities of corn by-products were investigated to determine their applicability as functional materials. Total polyphenol, flavonoid contents, and ABTS antioxidant activity were the highest in leaves. The total phenolic acid content was the highest in cobs; p-coumaric and ferulic acid were the main components. Phytosterol content in leaves and stems was high at 64 and 50 days after sowing, 261.4 and 274.7 mg/100 g, respectively. β-sitosterol of the leaves and stems was the highest, 149.2 and 138.7 mg/100 g. The total phytosterol content of grains and by-products harvested 106 days after sowing was in the order of: corn silk, husk, grain, leaf, stem, and cob. Among the phytosterols, β-sitosterol was the highest, followed by stigmasterol and campesterol, and the composition was different depending on part. The total phytosterol content was the highest in husk and corn silk, but the stems and leaves, which account for 50% of the total corn biomass, also contained high phytosterol content. Therefore, corn leaves and stems are expected to be used as functional raw materials for the development of functional materials in the future.

Pine Wilt Disease (PWD) is a disease causing mass deaths of pine trees in South Korea, and the dead trees serve as breeding grounds for insect vectors responsible for spreading the disease to other host trees. Because the PWD requires early monitoring to minimize its damage on domestic forestry, this study aims to develop a species distribution model for predicting the potential distribution of PWD by using artificial neural network (ANN) with time-series data. Among the architectures, the Convolutional Neural Network exhibited the highest performance, achieving a validation accuracy of 0.854 and a cross-entropy loss of 0.401, and the InceptionTime model emerged as the second-best performer. This study identified the best-performing ANN architecture for a spatiotemporal evaluation of PWD occurrence, emphasizing the importance for determining hyperparameters with ecological characteristics and data types to apply deep learning into SDMs.

2022년 10월부터 2023년 5월까지 친환경 딸기재배 농가에서 점박이응애는 칠레이리애응애와 사막이리응애, 진딧물은 콜레마니진디벌을 대상으로 하는 천적처리구와 유기농자재를 사용하는 관행방제구에서 천적의 해 충 밀도억제 효과를 조사하였다. 천적처리구에서 점박이응애 성충 밀도는 잎당 1.5마리 이하, 알은 4개 이하로 관리되었고, 사막이리응애는 잎당 최대 0.4마리까지 증가하여 점박이응애 밀도억제에 많은 영향을 미친것으로 보인다. 반면, 관행방제구에서 점박이응애 밀도는 천적 방사구에 비하여 오히려 많은 발생량을 보였지만, 3월 9일부터는 사막이리응애의 증가와 유기농자재의 효과로 점박이응애 밀도는 급격하게 감소하였다. 진딧물 천적 처리구에서 진딧물 밀도는 1월부터 발생하였으며 3월 상순에 잎당 0.3마리까지 증가하였으나 이후 감소하였고, 콜레마니진디벌은 진딧물 발생이 많지 않아 3.9마리/㎡(2회) 방사하는 데 그쳤다. 한편, 관행방제구 포장의 진딧 물은 유기농자재의 영향으로 거의 발생하지 않았다.

Artificial intelligence (AI) is transforming healthcare, yet little is known about how consumers experience and make decisions regarding follow-up care with medical AI. We take an interdisciplinary approach combining behavioral research and neuroscience to examine how anthropomorphism and personalization influence well-being and follow-up decisions. Study 1 found that consumers felt well-being after interacting with a highly personalized interaction, whether human or AI doctor. However, they preferred follow-up visits with the human doctor. Empathy mediated these effects. Study 2 used fMRI to show that the anterior cingulate cortex had greater activation when interacting with the human doctor, indicating more emotional processing and conflict resolution. These findings suggest that medical AI cannot currently replace human doctors, who remain vital for actual medical consultations and treatment. However, consumers viewed AI doctors positively and expressed a belief that AI will enhance well-being. By integrating neuroscience, this research provides biological evidence complementing behavioral findings.

The organic complexing agents such as ethylenediaminetetraacetic acid (EDTA), nitrilotriacetic acid (NTA), and isosaccharinic acid (ISA) can enhance the radionuclides’ solubility and have the potential to induce the acceleration of radionuclides’ mobility to a far-field from the radioactive waste repository. Hence, it is essential to evaluate the effect of organic complexing agents on radionuclide solubility through experimental analysis under similar conditions to those at the radioactive waste disposal site. In this study, five radionuclides (cesium, cobalt, strontium, iodine, and uranium) and three organic complexing agents (EDTA, NTA, and ISA) were selected as model substances. To simulate environmental conditions, the groundwater was collected near the repository and applied for solubility experiments. The solubility experiments were carried out under various ranges of pHs (7, 9, 11, and 13), temperatures (10°C, 20°C, and 40°C), and concentrations of organic complexing agents (0, 10-5, 10-4, 10-3, and 10-2 M). Experimental results showed that the presence of organic complexing agents significantly increased the solubility of the radionuclides. Cobalt and strontium had high solubility enhancement factors, even at low concentrations of organic complexing agents. We also developed a support vector machine (SVM) model using some of the experimental data and validated it using the rest of the solubility data. The root mean square error (RMSE) in the training and validation sets was 0.012 and 0.016, respectively. The SVM model allowed us to estimate the solubility value under untested conditions (e.g., pH 12, temperature 30°C, ISA 5×10-4 M). Therefore, our experimental solubility data and the SVM model can be used to predict radionuclide solubility and solubility enhancement by organic complexing agents under various conditions.

An important goal of dismantling process is the disassembling of a spent nuclear fuel assembly for the subsequent extraction process. In order to design the rod extractor and cutter, the major requirements were considered, and the modularization design was carried out considering remote operation and maintenance. In order to design the rod extractor and cutter, these systems were analyzed and designed, also the concept on the rod extraction and cutting were considered by using the solid works tool. The main module consists of five sub-modules, and the function of each is as follows. The clamping module is an assembly fixing module using a cylinder so that the nuclear fuel assembly can be fixed after being placed. The Pusher module pushes the fuel rods by 2 inches out of the assembly to grip the fuel rods. The extraction module extracts the fuel rods of the nuclear fuel assembly and moves them to the consolidation module. The consolidation module collects and consolidates the extracted fuel rods before moving them to the cutting device. And the support module is a base platform on which the modules of the main device can be placed. The modules of level 2 can be disassembled or assembled freely without mutual interference. For the design of fuel rods cutter, the following main requirements were considered. The fuel rod cut section should not be deformed for subsequent processing, and the horizontally mounted fuel rods must be cut at regular intervals. The cutter should have the provision for aligning with the fuel rod, and the feeder and transport clamp should be designed to transfer the fuel rods to the cutting area. The main module consists of 6 sub-modules, and function of each is as follows. The cutting module is a device that cuts the fuel rods to the appropriate depth for notching. The impacting module is a device that impacts the fuel rods and moves them to the collection module. The transfer module is a device that moves the fuel rods to the cutting module when the aligned fuel rods enter the clamp module. The clamping module is a device to clamp the fuel rods before moving them to the cutting module. The collection module is a container where the rod-cuts are collected, and the support module is a base platform on which the modules of the main device can be placed. The module of level 3 can be disassembled or assembled after the cutting module of level 2 is installed, and the modules of level 2 can be disassembled or assembled freely without mutual interference.

In this paper, a basic study was conducted to observe the temperature inside the tube according to the heating temperature of the tube furnace. In a tube furnace, a tube is inserted, and the air space outside the tube is heated to increase the temperature of the gas inside the tube through conduction of the tube. Tube furnaces are widely used in research to capture volatile nuclides. In this case, a volatile nuclide capturing filter is inserted inside the tube, and an appropriate temperature is required to capture it. Since the tube furnace heats the air space outside the tube to the target temperature, a difference from the temperature inside the tube occurs. In particular, if a flow of gas occurs inside the tube, a larger temperature difference may occur. In order to confirm this temperature difference, an experimental device was constructed, and basic data was produced through several experiments. The following studies were conducted to produce data. First, the temperature of the air layer of the heating unit and the temperature inside the tube were measured in real time in the absence of gas flow inside the tube. Second, the temperature of the air layer of the heating unit and the temperature inside the tube were measured in real time while air having a certain temperature was flowing inside the tube. As a result of the experiment, when there is no flow inside the tube, when the heating target temperature is low, the temperature inside the tube is significantly lower than the target temperature, and when the target temperature is high, the temperature inside the tube approaches the target temperature. It was found that when there is about 20°C air flow inside the tube, the temperature inside the tube is significantly lowered even if the heating target temperature is high. In the future, additional research on changing the temperature of the gas flowing inside the tube will be conducted, and the results of this study are expected to greatly contribute to the design of a tube furnace that captures volatile nuclides.