Bis (2-ethylhexyl)phosphoric acid (HDEHP) is a renowned extractant, favored for its affinity to selectively remove uranium via its P=O groups. We previously synthesized HDEHP-functionalized mesoporous silica microspheres for solid-phase uranium adsorption. Herein, we investigated the kinetic and isothermal behavior of uranyl ion adsorption in mesoporous silica microspheres functionalized with phosphate groups. Adsorption experiments were conducted by equilibrating 20 mg of silica samples with 50 mL of uranium solutions, with concentrations ranging from 10 to 100 mgU L−1 for isotherms and 100 mgU L−1 for kinetics. Three distinct samples were prepared with varying HDEHP to TEOS molar ratios (x = 0.16 and 0.24) and underwent hydrothermal treatment at different temperatures, resulting in distinct textural properties. Contact times spanned from 1 to 120 hours. For x = 0.16 samples, it took around 50 and 11 hours to reach equilibrium for the hydrothermally treated samples at 343 K and 373 K, respectively. Adsorbed quantities were similar (99 and 101 mg g-1, respectively), indicating consistent functional group content. This suggests that the key factor influencing uranium adsorption kinetics is pore size of the silica. The sample treated at 373 K, with a larger pore size (22.7 nm) compared to 343 K (11.5 nm), experienced less steric hindrance, allowing uranium species to diffuse more easily through the mesopores. The data confirmed the excellent fit of pseudo-second-order kinetic model (R2 > 0.999) and closely matched the experimental value, suggesting that chemisorption governs the rate-controlling step. To gain further insights into uranium adsorption behavior, we conducted an adsorption isotherm analysis at various initial concentrations under a constant pH of 4. Both the Langmuir and Freundlich isotherm models were applied, with the Langmuir model providing a superior fit. The relatively high R2 value indicated its effectiveness in describing the adsorption process, suggesting homogenous sorbate adsorption on an energetically uniform adsorbent surface via a monolayer adsorption and constant adsorption site density, without any interaction between adsorbates on adjacent sites. Remarkably, differences in surface area did not significantly impact uranium removal efficiency. This observation strongly suggests that the adsorption capacity is primarily governed by the loading amount of HDEHP and the inner-sphere complexation with the phosphoryl group (O=P). Our silica composite exhibited an impressive adsorption capacity of 133 mg g-1, surpassing the results reported in the majority of other silica literature.

The disposal of spent nuclear fuel (SNF) in a deep geological repository (DGR) is a widely accepted strategy for the long-term sequestration of radiotoxic SNF. Ensuring the safety of a DGR requires the prediction of various reactions and migration behaviors of radionuclides (RNs) present in SNF within its geochemical surroundings. Understanding the dissolution behaviors of mineral phases harboring these RNs is crucial, as the levels of RNs in groundwater are basically linked to the solubility of these solid phases. Accurate measurements of solubility demand the use of welldefined solid materials characterized by chemical compositions and structures. Herein, we attempted the synthesis of sklodowskite, a magnesium-uranyl (U(VI))-silicate, employing a twostep hydrothermal synthetic approach documented previously. Subsequently, we subjected this synthesized sklodowskite to various analytical techniques, including powder X-ray diffraction (pXRD), scanning electron microscopy/energy dispersive X-ray spectrometry (SEM/EDX), and vibrational spectroscopies (FTIR and Raman). Based on our findings, we confidently identify the obtained mineral phase as sklodowskite (Mg[UO2SiO3OH]2·5H2O). This identification is primarily based on the similarity between its pXRD pattern and the reference XRD pattern of sklodowskite. Furthermore, the measured infrared and Raman spectra show the vibrational modes of UO2 2+ and SiO4 4- ions, particularly within the 700~1,100 cm-1 region, which support that the synthetic mineral has a characteristic layered uranyl-silicate structure of crystalline sklodowskite. Finally, we utilized synthetic minerals to estimate its solubility up to about three months in a model groundwater, where the dissolved species composition is analogous to that of granitic groundwater from the KAERI Underground Research Tunnel. In this presentation, we will present in detail the results of spectroscopic characterizations and the methodology employed to assess the solubility of the U(VI)-silicate solid phase.

Confirmation of the thermal behavior of spent fuel is one of the important points in the management of high-level radioactive waste. This is because various fission products exist in spent nuclear fuel, and a management plan according to their behavior is required. Among the fission products, epsilon particles exist in the form of metal deposits and have a great influence on their physical and chemical properties. However, observing the thermal behavior of epsilon particles is important for understanding spent fuel behavior in thermally environment, but it is difficult to maintain a consistent thermal environment. In this work, we report the thermal behaviors study of uranium oxide with epsilon particle using in situ high temperature X-ray diffraction. We measured the variation of temperature on the size of crystalline, which is a cell parameter in the reaction process. And then, the change of lattice parameters is calculated by Rietveld refinement.

In this study, we evaluated the performance of phosphate-functionalized silica in adsorbing uranium and provided insights into optimizing the initial conditions of the uranium solution (concentration and pH), which are often overlooked in uranium adsorption studies. While most studies take into account the effect of pH on both the surface charge of the adsorbents and the dissolved speciation of uranium in solution, they often overlook the formation of solid phases such as β-UO2(OH)2 (cr) and UO3· 2H2O(cr), leading to an overestimation of the adsorption capacity. To address this issue, we considered the speciation of U(VI) calculated using thermodynamic data. Our findings suggest that it is reasonable to evaluate the adsorption performance at pH 4 and concentration below 1.35 mM. The formation of β-UO2(OH)2 (cr) starts at 23 μM (pH 5) and 1 μM (pH 6) and increases sharply with increasing concentration. To avoid interference from the formation of solid phases, experiments should be conducted at lower concentrations, which in turn require very small msorbent/Vsolution ratios. However, controlling small amounts of sorbent can be challenging, and increasing the volume of the solution can generate significant amounts of radioactive waste. We also used UV-vis spectra analysis to investigate the formation of solid phases. We found that a 100 mg L-1 uranium solution resulted in the formation of colloidal particles in the solid phase after 2.5 hours at pH 6, while at pH 4, no significant changes in absorbance were observed over 120 hours, indicating a stable ion phase. Based on these conditions, we obtained an excellent adsorption capacity of 110 mg g-1.

The removal of aqueous pollutants, including dye molecules from wastewater remains one of the pressing problems in the world. Because of chemical stability and conjugated structure, dye molecules cannot be easy decomposed by heat with oxidizing reagents such as H2O2 and light. The most common representative of widespread organic pollutant is methylene blue (MB) with molecular formula C16H18ClN3S, which is important colorant and used in various chemical and biological production industries and causes serious environment problems. Porous materials, including MOFs (metal-organic frameworks) have been applied for efficient MB photocatalytic degradation. However, one of the main barriers to using most MOFs to break down aromatic organics is wide band gap energy, which means that the catalyst can exhibit high photocatalytic performance only under UVlight irradiation. Moreover, most MOFs usually show the poor water stability of frameworks, which tend to dissolve in water with total destruction. In this work we report about two new copper based MOFs with high photocatalytic properties for efficient MB degradation from wastewater under UV-light and natural sunlight. Time, required for 100% MB degradation, equals 7 minutes under UV (source 4 W 254 nm VL-4.LC UV-lamp) and 60 minutes under natural sunlight irradiation in the presence of H2O2. Crystal structure information is provided using single crystal X-ray diffraction data. The composition and comparative characteristics of MOFs are given using powder X-ray diffraction, UV–visible diffuse reflectance spectroscopy, UVvisible spectroscopy and Fourier-transform infrared spectroscopy.

Anderson-type polyoxometalate (POM) with general formula of [Hy(XO6)M6O18]n- (y=0-6, n=2-8, M=addenda atom, X=heteroatom) represents one of the basic topological structures among POM-type family. Anderson-type POMs have a planar arrangement and two terminal oxygen atoms attached to each addenda metal atom unlike other type. Thus, the Anderson-type POMs have high reactivity and various coordination modes. The various multifunctional organic-inorganic hybrid materials can be synthesized using the Anderson-type POMs as an inorganic building block. Another important feature of the Anderson-type POMs is the incorporation of the heteroatoms with various sizes and oxidation states, which can lead to tune chemical properties. No Anderson-type POMs with early transition metal ions in the heteroatom site have been reported previously. Recently, we reported the synthesis of titanium-containing Anderson-type POM, Na2K6Ti0.92W6.08O24∙12H2O (Ti-POM), which consists of pure inorganic framework built from a central Ti atom surrounded by six WO6 inorganic scaffold. Herein, in-depth studies were conducted to find optimal synthesis conditions such as composition and pH. The success of synthesis was confirmed with Powder X-ray Diffraction that the Ti-POM has a rhombohedral structure with space group of R-3m (No. 166) when the TiOSO4·xH2SO4∙yH2O/ Na2WO4∙2H2O molar ratio is in the range of 0.07 to 0.33. But outside of this range, other unwanted phases coexist. In a basic condition (pH=12), a single-phase Ti-POM with good crystallinity can be obtained, while a Keggin-type POM, NaxK10-x(H2W12O42), was formed through the decomposition of Ti-POM at pH lower than 7.

Nuclear spent fuel (SNF) disposal in deep geological repositories is considered as one of sound options for the long-term and safe sequestration of radiotoxic SNF and the sustainable use of nuclear energy. The chemical behaviors of various radionuclides originated from SNF should be well understood to evaluate the migrational behaviors of radionuclides and their reactions and interactions with various geochemical components. Formation of secondary minerals, colloids, other insoluble precipitates is of interest since the concentrations of radionuclides in groundwaters can be limited by the solubility of those solid phases. Particularly when evaluating their solubility, the use of well-defined solid materials in terms of chemical composition and molecular structure is crucial to obtain reliable measurement results. In this study, a synthetic calcium uranyl silicate (Ca-U(VI)-silicate, or uranophane) was prepared and characterized by using various analytical methods including powder X-ray diffraction (pXRD), scanning electron microscopy/energy dispersive X-ray spectrometry (SEM/EDX), and vibrational (FTIR and Raman) spectroscopies. Uranyl silicate minerals are significant to the disposal of nuclear wastes. Our simulation demonstrates that uranophane (Ca[UO2SiO3OH]2·5H2O), one having a U:Si ratio of 1:1, can be a mineral species limiting U(VI) solubility under groundwater conditions in Korea. For the preparation of Ca-U(VI)-silicate, we applied a two-step hydrothermal synthetic procedure reported in literature with modification. Briefly, we conclude that the obtained mineral phase is the ‘α-uranophane’; our characterization results show that the structural and spectroscopic properties of the synthetic Ca-U(VI)-silicate agree well with those of α-uranophane. For instance, the pXRD patterns obtained from the solid show nearly identical diffraction peak positions with those from the reference XRD pattern. From IR and Raman spectroscopy it is noticed that the stretching modes of UO2 2+ and SiO4 4- ions result in strong absorption bands in a region of 700 ~ 1,100 cm-1. Elemental compositions of the synthetic solids were also estimated by using EDX analysis, which results in a Ca:U:Si ratio close to 1:2:2 on average. However, we found that it is difficult to obtain good crystallinity of uranophane, which can be observable by using SEM and its image analysis. We believe that this work serves as a model study to provide synthetic routes of radionuclide-related mineral phases and applicable solid phase characterization methods. In the presentation, the potential use of the U(VI)-silicate solid phase for the upcoming groundwater solubility measurements will be discussed. Keywords: Hexavalent Uranium, Silicate

Spent nuclear fuel is a very complex material because various elements such as fission products, transuranium elements and activation products are produced from initial fresh UO2 fuel after irradiation. These elements exist in UO2 with various forms and can change the structure and of physicochemical properties of UO2. These changes could provide the surface activation site that could enhance chemical reactions and corrosion processes, and would significantly affect the storage environment for long-term disposal of spent nuclear fuel. Therefore, it can be important to understand the characteristics of spent nuclear fuel to design reliable and safe geological repositories. However, it is too hard to study the characteristics of spent nuclear fuel, because it is a very complex material by itself and not easy to handle due to its radioactivity, and it is also difficult to independently understand the effects of each element. Therefore, a simulated spent nuclear fuel containing an element that forms a solid solution and epsilon particle was manufactured to understand the change in characteristics of each element. Most of the elements that form solid solutions are lanthanides or actinides and can change the structure of the UO2 lattice itself. The epsilon particles exist as metals at the grain boundaries of UO2. In this study, structural changes were measured using XRD, SEM, and Raman spectroscopy, and physical and chemical properties were also identified by measuring electrical conductivity and electrochemical properties. The results were summarized, and the effects of solid solution elements and epsilon particles on the structure and properties of UO2 matrix were compared and discussed.

Polyoxometalates (POMs) are nanoclusters composed of transition metals with high oxidation states. Owing to their redox properties and structural diversity, POMs have been applied to broad fields, such as catalysis, materials, and medicine. Among various fields of application, POMs play an important role in radiochemistry. POMs can form complexes with tri- and tetravalent lanthanides and actinides (radioactive elements), which may be good sequestrators or agents for separating nuclear wastes. Among the most prominent POM structures, Anderson-type POMs with a general formula of [Hy(XO6)M6O18]n− (y=0–6, n=2–8, M=addenda atom, X=heteroatom) represent one of the basic topological structures of the POM family. An important feature of Anderson type POMs is incorporating a large number of various heteroatoms with different size and oxidation states, which can lead to tune chemical properties. Interestingly, no example of Anderson type POMs with early transition metal ions in the heteroatom site has been reported to date. Herein, we discovered that the Anderson POM Na2K6Ti0.92W6.08O24·12H2O, which consists of pure inorganic framework built from a central Ti core supported by six WO6 inorganic scaffold, and the crystal structure was confirmed and refined using single-crystal X-ray diffraction (SC-XRD). In addition, structural characterizations, including, Fourier-transform infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS), and Inductively coupled plasma-optical emission spectroscopy (ICP-OES) were performed.

An important property of glass and ceramic solid waste forms is processability. Tellurite materials with low melting temperatures and high halite solubilities have potential as solid waste forms. Crystalline TiTe3O8 was synthesized through a solid-state reaction between stoichiometric amounts of TiO2 and TeO2 powder. The resultant TiTe3O8 crystal had a three-dimensional (3D) structure consisting of TiO6 octahedra and asymmetric TeO4 seesaw moiety groups. The melting temperature of the TiTe3O8 powder was 820℃, and the constituent TeO2 began to evaporate selectively from TiTe3O8 above around 840℃. The leaching rate, as determined using the modified American Society of Testing and Materials static leach test method, of Ti in the TiTe3O8 crystal was less than the order of 10-4 g·m-2·d-1 at 90℃ for durations of 14 d over a pH range of 2-12. The chemical durability of the TiTe3O8 crystal, even under highly acidic and alkaline conditions, was comparable to that of other well-known Ti-based solid waste forms.

This study explored spatiotemporal variability of water quality in correspondence with hydrometeorological factors in the five stations of Paldang Reservoir located in the Han River during 4 years from May 2012 to December 2015. Variability of basic water quality factors were largely related with seasonal fluctuations of hydrology. Temperature stratification occurred in the deep dam station, and prolonged hypoxia was observed during the draught year. Nitrogen nutrients were increased with decreasing inflow in which changing pattern of NH4 reversed to NO3 by the effect of treated wastewater effluent. Phosphorus increase was manifest during the period of high inflow or severe drought. Chl-a variation was reversely related with both flow change and AGP (algal growth potential) variations. Our study demonstrated that water quality variability in Paldang Reservoir was largely attributed to both natural and operational changes of inflow and outflow (including water intake) based on major pollution source of the treated wastewater (total amount of 472×103 m3 d-1) entering to the water system from watershed. In the process of water quality variability, meteorological (e.g., flood, typhoon, abnormal rainfall, scorching heat of summer) and hydrological factors (inflow and discharge) were likely to work dynamically with nutrients pulse, dilution, absorption, concentration and sedimentation. We underline comprehensive limnological study related to hydro-meteorolology to understand short- and long-term water quality variability in river-type large reservoir and suggest the necessity of P-free wastewater treatment for the effective measure of reducing pollution level of Paldang drinking water resource.