마비성패류독(Paralytic shellfish poison, PSP)에 의하여 독화된 패류의 유효이용에 대한 자료를 제공하고자 독화된 진주담치의 중장선 균질육, 0.1N HCl로 추출한 조독소 용액, 중장선으로부터 정제한 gonyautoxin(GTX) group과 saxitoxin(STX) group 등 4가지 형태의 PSP 독소에 대한 내열성을 조사하였다. 독화된 진주담치의 중장선육 균질액, 산추출 조독소액, GTX group, STX group 등 4 종류의 반응속도상수는 120℃에서 3.28×10^(-2), 1.20×10^(-2), 5.88×10^(-2), 2.58×10^(-2)이었으며 4 종류의 독소 중 0.1 N HCl 추출한 조독소용액의 D-value가 가장 높았다. 반응속도상수를 이용한 살균온도 산정에 있어서, 초 독력이 200 /100g인 독화된 진주담치육의 경우, 독력을 마비성패류독 규제치인 80 ㎍/100g으로 감소시키는데에는 90℃에서는 약 129분, 100℃에서는 약 82분, 110℃에서는 약 48분, 120℃에서는 약 28분이 걸렸다. 이러한 결과는 최초 독력이 200 ㎍/100g인 패류의 경우, 통조림 살균공정 후 잔존 독력이 규제치인 80㎍/100g이하로 감소시키는데에는 현재의 살균조건(115℃, 70분)으로는 충분하다는 것을 입증한다

The present study was carried out to investigate the physicochemical properties of hot water extracts of red ginseng powder prepared by two-stage hot air drying method using steamed ginseng and steaming liquid for 2.5 h under high-temperature and high-pressure autoclave condition. The total polyphenols, total flavonoids, total sugar, acid polysaccharides and crude saponin in hot water extracts from red ginseng powder were analyzed and determined, and the flavor components of ginseng were measured using color difference meter and an electronic tongue. The total polyphenol, total flavonoid, total polysaccharide, and acid polysaccharide of the red ginseng hot water extract obtained by autoclaving (ARG) were 9.06 mg GAE/g, 3.38 mg NE/g, 35.22 g/100 g, and 10.90 g/100 g, respectively. The final contents of the total polyphenols, total flavonoids, crude saponin were higher than those determined using other red ginseng methods; the time required for steamed red ginseng production reduced. The total ginsenoside content of ginseng including Rb1 was 10.69 mg/g, which is the lowest ARG. The processing conditions affected the conversion to ginsenosides unique to red ginseng. Red ginseng and steaming liquid obtained from the autoclave are expected to be in need for non-food materials and products as well as foods by improving the flavor components through conversion of red ginseng components into low molecular weight.