In this study, the distribution characteristics of particulate matter (PM) in subway platforms were investigated, and the performance of hybrid filter systems was determined through the removal efficiency of PM according to various flow rates and filter structures. The hybrid filter systems were constructed in magnetic systems as (Magnet-Magnet (MM) filters and Magnet-Cascade (MC) filters). PM removal efficiencies of these filters were investigated at a subway platform for three days including weekdays and weekends. The compositions of collected PM were also analyzed. Based on the PM measurement in the subway platforms, it was confirmed that the operation of trains had a significant effect on the increase of PM concentration, and a large number of PMs were less than 1 μm in size. For the MC filter, the removal efficiency of PM1 based on the number of particles was up to 30.5%, demonstrating a relatively high removal efficiency in comparison with the MM filter. In terms of PM10, PM removal efficiencies of the MC filter with respect to the mass concentration and the number of particles were 48.3% and 14.5%, respectively. For the MC filter, it was found that the PM removal efficiency was enhanced with the increase in the flow rate. Moreover, the relatively large particle size PM (i.e., 7.5 μm - 10 μm) denoted a maximum removal efficiency of 97% in terms of the number of particles. All PMs collected by the filter were Fecontaining PMs. As a field experiment using the hybrid filter, the applicability of magnetic particle control technology was approved. Based on this result, it is expected that this study will be used as background research for the development of fine dust control technologies in a subway environment.

In this paper, an overview of the scoping calculation results is provided with respect to criticality and radiation shielding of two KBS-3V type PWR SNF disposal systems and one NWMO-type CANDU SNF disposal system of the improved KAERI reference disposal system for SNFs (KRS+). The results confirmed that the calculated effective multiplication factors (keff) of each disposal system comply with the design criteria (< 0.95). Based on a sensitivity study, the bounding conditions for criticality assumed a flooded container, actinide-only fuel composition, and a decay time of tens of thousands of years. The necessity of mixed loading for some PWR SNFs with high enrichment and low discharge burnup was identified from the evaluated preliminary possible loading area. Furthermore, the absorbed dose rate in the bentonite region was confirmed to be considerably lower than the design criterion (< 1 Gy‧hr-1). Entire PWR SNFs with various enrichment and discharge burnup can be deposited in the KRS+ system without any shielding issues. The container thickness applied to the current KRS+ design was clarified as sufficient considering the minimum thickness of the container to satisfy the shielding criterion. In conclusion, the current KRS+ design is suitable in terms of nuclear criticality and radiation shielding.

In order to get stabilized pure retinol in skin care cosmetics, developing the three layered matrix bead capsules were studied. This study relates to make a cosmetic composition using the three layered matrix capsule that could increase the stability of the active ingredient. A primary encapsulation, vitamin A (pure retinol) of active ingredient was perfectly capsulated into water-in-oil (Water-in-Oil: W/O) emulsion vesicle using PEG-10 dimethicone copolyol emulsifier. A secondary encapsulation of multiple emulsion of the water-in-oil-in-water (W/O/W) emulsion blending W/O emulsion using sucrose distearate of surfactant was developed using homogenizing emulsifying system. Pure retinol of active ingredient was stably capsulized to inside the W/O/W-multiple emulsion in order to load the triple matrix capsulation. By coating it with a polymer matrix base, encapsulated in the triple layered type, which were developed bead encapsulation of 2~10mm uniformly size. To show beautifully appearance capsulated bead type, these finish particles in this triple matrix layer were developed as a gold, green, dark brown, silver and blue color were encapsulated in the bead types. Structural particle certification of triple matrix layer was observed through SEM analysis. Stability of pure retinol was remained stable more than 99.7% for 30 days at 42°C incubating conditions compared with non-capsule. This technology was applied in different formulations such as various sizes and colors that by applying the skin care cosmetics. In the future, this technology to encapsulate an unstable active ingredient, we expect to be expanded this application in the food and drug as a time delivery system.

This experiment was carried out to determine the treatment interval on neem product for control of Bemisia tabaci on eggplant using eco-friendly agriculture. We have investigated the control effect of B. tabaci, growth characteristics of eggplant, economics according to neem product treatment interval on eggplant. The longer neem processing interval tended to decrease control effect on nymphs of B. tabaci. Control effect of nymph of B. tabaci according to treatment interval of 3 days, 5 days, 7 days, 10 days, and 15 days were 96.7%, 89.7%, 76.1%, 73.4%, and 51.0%, respectively. This result was the same tendency in adult of B. tabaci control effects on eggplant. Growth characteristics of eggplant according to neem the treatment interval of 3 days, 5 days, and 7 days, was less damaged on of B. tabaci. However, the 10 days, 15 days, and untreated of neem treatment intervals were badly damaged by B. tabaci. Therefore, neem treatment interval of 3~7 days for control of B. tabaci was high control effect. However, it is considered to be the most suitable to process every seven days considering the economics and so on. The results of economic analysis from income of 7 days neem treatment interval was the most high as 19.505 thousand won per 10a and the most economical treatment for control of B. tabaci.

The initial investment of rice cultivation by mechanical technique was high. This was only due to the cost of planting machine. We analysed the overall cost (without machine cost) and benefits of the two methods, it manifested that the mechanical method is very much beneficial over traditional rice cultivation technique. We observed that the requirement of soil, irriigation water, number of seeds etc. decreased in mechanical cultivation technique while net income increase by 13.07% with 80% government subsidy. Furthermore, the initial rooting was quicker, growth and development of pot raised seedlings was better than the traditional technique. Hence, this technique can give better return to the farmers with the help of government subsidy.