The amount of radioactive waste generated during decommissioning directly affects the disposal cost of waste. Most of the radioactive waste generated is a concrete waste. Therefore reducing the amount of concrete waste can ensure the economic feasibility of the decommissioning project. The activated concrete in a concrete waste can reduce waste only by physical cutting. Therefore it is most important to accurately identify and categorize radionuclides, radioactivity levels, and radioactivity distribution. In the case of radioactive concrete, radiological characteristics are generally evaluated by laboratory analysis after sampling. However it is difficult to apply to all facilities (accelerator & NPP, etc.) because it is a destructive method. Therefore it is necessary to secure verified in-situ measurement technology that can be applied to operational monitoring or decommissioning plans. In this study, the applicability of cyclotron facilities was evaluated based on the evaluation algorithm derived from the Peak to Compton (PTC) method of in-situ measurement technology. And the reliability of the PTC method was verified through qualitative analysis and quantitative analysis. In the case of qualitative analysis, the analysis results of KAERI which has core technology are compared. To this end SAEAN and KAERI conducted field application tests on the front concrete shielding wall of the cyclotron facility at the same time. After removing the background spectrum from the measured spectrum the PTC method was applied to calculate the Q-value for the counting rate in the peak area per counting rate in the Compton continuum area was calculated. As a result the Q-values of SAE-AN and KAERI were 0.52 and 0.24 respectively, and the result of deriving activation distribution(β) by substituting this for the β-Q correlation equation was found that 14.78 and 12.94. As a result of evaluating the activation by the thickness of the shielding wall it was found that 89.1% (SAE-AN) and 91.9% (KAERI) of the total radioactivity were exist at a depth of 5 cm. And it was found that 97.7% and 99.05% of the total radioactivity exists at a depth of 10 cm. The relative error between SAE-AN and KAERI is 1.35%, indicating that the analysis results of the two institutions are highly consistent. A core drill was performed on the concrete shielding wall in the cyclotron facility for the technical verification of the quantitative analysis method. A core sample (6 cm in diameter, 10 cm in depth) was cut to a depth of 2 cm and analyzed in the laboratory. The activation distribution(β) was calculated based on the radioactivity level of each depth sample, and it was found to be 16.99. The relative error between the quantitative analysis and the on-site measurement results was 14.95% confirming that the accuracy is relatively high.

This study had two aims. First, the study intended to identify the influences of product benefits and product identification on consumers' purchase intention, Second, it wanted to assess the moderating effects of consumers' aesthetic seeking tendency on their decision-making process. Based on the stimulus-organism-response (S-O-R) paradigm and the product personality-brand identification-purchase intention model, this study proposed a research model, the benefits-product identification-purchase intention model. To test the model, a survey was conducted of female college students; a total of 298 questionnaires were analyzed. The stimulus used was a popular model of Nike running footwear: the Luna Eclipse+2. Factor analysis and structural equation analysis were conducted to analyze the research model. The results indicate : (1) The aesthetic benefit influenced product identification positively. The aesthetic benefit, functional benefit and product identification were all positively related to purchase intention. (2) The aesthetic seeking tendency mediated the influences of product benefits on consumers' purchase intention in the decision-making process. For consumers in the ‘high’ level group of aesthetic seeking tendency, aesthetic benefit and social benefit affected purchase intention and for consumers in the ‘low’ level group of aesthetic seeking tendency, the functional benefit only affected purchase intention. Based on this study, we find evidence that product benefits and aesthetic seeking tendency play important roles in consumers' decision-making process in product purchase.

As wrought stainless steel, sintered stainless steel (STS) has excellent high-temperature anti-corrosion even at high temperature of 800ºC and exhibit corrosion resistance in air. The oxidation behavior and oxidation mechanism of the sintered 316L stainless was reported at the high temperature in our previous study. In this study, the effects of additives on high-temperature corrosion resistances were investigated above 800ºC at the various oxides (SiO2, Al2O3, MgO and Y2O3) added STS respectively as an oxidation inhibitor. The morphology of the oxide layers were observed by SEM and the oxides phase and composition were confirmed by XRD and EDX. As a result, the weight of STS 316L sintered body increased sharply at 1000oC and the relative density of specimen decreased as metallic oxide addition increased. Compared with STS 316L sintered parts, weight change ratio corresponding to different oxidation time at 900oC and 1000oC, decreased gradually with the addition of metallic oxide. The best corrosion resistance properties of STS could be improved in case of using Y2O3. The oxidation rate was diminished dramatically by suppression the peeling on oxide layers at Y2O3 added sintered stainless steel.

As well-known wrought stainless steel, sintered stainless steel (STS) has excellent high-temperature anticorrosion even at high temperature of 800ºC, and exhibits good corrosion resistance in air. However, when temperature increases above 900ºC, the corrosion resistance of STS begins to deteriorate and dramatically decreases. In this study, the effects of phase and composition of STS on high-temperature corrosion resistances are investigated for STS 316L, STS 304 and STS 434L above 800ºC. The morphology of the oxide layers are observed. The oxides phase and composition are identified using X-ray diffractometer and energy dispersive spectroscopy. The results demonstrate that the best corrosion resistance of STS could be improved to that of 434L. The poor corrosion resistance of the austenitic stainless steels is due to the fact that NiFe2O4 oxides forming poor adhesion between the matrix and oxide film increase the oxidation susceptibility of the material at high temperature.

We report the preparation of sulfonated reduced graphene oxide (SRGO) by the sulfonation of graphene oxide followed by radiation-induced chemical reduction. Graphene oxide prepared by the well-known modified Hummer's method was sulfonated with the aryl diazonium salt of sulfanilic acid. Sulfonated graphene oxide (SGO) dispersed in ethanol was subsequently reduced by γ-ray irradiation at various absorbed doses to produce SRGO. The results of optical, chemical, and thermal analyses revealed that SRGO was successfully prepared by γ-ray irradiation-induced chemical reduction of the SGO suspension. Moreover, the electrical conductivity of SRGO was increased up to 2.94 S/cm with an increase of the absorbed dose.

양송이 유통에 적합한 필름 포장방법 연구를 위해 저장온도 및 필름 산소투과도에 따른 양송이 품질변화를 분석하였다. 실험에 이용된 필름은 PVC와 OPP(OTR 1,000, 6,000, 10,000, 20,000 mL/m2/day/atm)이고 저장 온도는 4, 8, 12, 20℃로 설정하였다. 분석 결과, 중량감소율은 대조구, PVC, OPP 순으로 높았다. 갓 개열은 온도 별로 결과가 다르게 나타나 8℃ 이상에서 필름 처리구의 갓 개열 억제 효과가 나타났고 12℃에서는 필름 내부의 산소 농도가 낮을수록 억제 효과가 높은 경향이었다. 필름 중 OPP20000은 20℃에서 갓 개열 억제 효과가 나타나지 않았다. 대 신장은 모든 온도에서 전반적으로 필름 처리구가 대조구에 비해 억제되었으나 예외적으로 OPP20000은 대 신장이 대조구보다 오히려 촉진되는 결과였다. 조직의 경도는 필름 중 OPP1000이 다른 처리구에 비해 유의하게 높았다. 버섯의 내외부 색도는 모두 OPP 필름의 버섯이 대조구와 PVC에 비해 색 변화가 큰 경향이었다. 전반적으로 OPP는 중량감소, 갓 개열, 대 신장, 조직 경도에서 대조구에 비해 품질이 유지되는 효과가 있었으나 온도 및 산소투과도에 따라 효과의 차이가 있었고 OPP20000은 조직 생장 억제와 관련된 효과가 나타나지 않았다. OPP1000과 OPP6000은 OPP 중 조직 생장 억제에 가장 효과적이었으나 내부 단면에서 조직손상 및 수침 현상과 같은 장해가 나타났다. 한편 PVC 필름은 중량감소, 갓 개열, 대 신장이 대조구에 비해 변화가 적었고 내외부 갈변은 OPP보다 변화가 적어 전반적인 품질변화가 적은 것으로 분석되었다.