왕피천 수계 내 저서성 대형무척추동물의 군집구조 분석을 위해 총 5개 지점에서 2023년 총 4회(4월, 6월, 8월 11월) 조사를 실시하였다. 조사기간 중 저서성 대형무척추동물은 총 5문 7강 17목 77과 156종 17,179.1개체/㎡가 채집되었다. 수환경 변화에 민감한 E.P.T. 분류군은 전체 156종 중 91종이 출현하여, 전체 출현종의 58.3%를 차지 하였다. 섭식기능군(FFGs) 분석결과, 종 출현 양상은 육식성 포식자(Predator: P)가 51종(32.69%)으로, 개체 출현 양상은 주워먹는 무리(Gathering-collector: GC)가 6,867.2개체/㎡(39.97%)로 높은 비율로 출현하였다. 서식기능 군(FHGs) 분석결과, 붙는 무리(Clinger: CL)가 70종(44.87%), 12,720.6개체/㎡(74.04%)로 가장 높은 비율로 출현 하였다. 군집지수 분석결과, 우점도지수(DI) 0.43, 다양도지수(H′) 3.51, 풍부도지수(R1) 4.59 균등도지수(J′) 0.77 로 나타났다. 생물학적 수질 판정 지수(BMI) 분석결과, 평균 92.36(±0.83)으로 모든 지점에서 “매우 좋음”으로 판정되었다.

갈색거저리 유충의 사료인 밀기울은 대부분 수입에 의존하고 있는데 일부 국가의 식량 수출 중단 조치 등에 따른 국제 곡물가격 상승으로 밀기울 가격은 인상되고, 식용곤충 판매가격이 하락하면서 생산비 절감을 위한 사료 개발이 요구되고 있다. 농업부산물 3종을 50% 이상 급이하게 되면 유충 생육이 저하되었기 때문에 본 연구는 적정한 배합비율을 선정하기 위해 첨가사료 20, 30% 함량으로 밀기울과 혼합하여 사료를 급이하였을 때 갈색거 저리 유충의 생육 특성과 영양성분 변화에 대해 밀기울만 제공한 대조구와 비교하였다. 부산물 A와 B, C를 각각 30% 함유한 처리구에서 갈색거저리 유충 무게는 대조구와 차이가 없음을 확인하였다. 먹이소화율은 부산물B를 20% 함유한 처리구가 80.5%로 대조구에 비해 높았고, 부산물C 30% 처리구에서 72.6%로 가장 낮았다. 갈색거저 리 유충의 생육일수 100일 기준으로 부산물B 30% 처리구에서 용화율이 76.1%로 대조구보다 1.6배 높았으며, 부산물A 20% 처리구는 29.2%로 용화율이 가장 낮았다. 갈색거저리 유충의 조단백질 함량은 부산물 C 30% 처리 구에서 대조구보다 10.3% 증가하여 아미노산 분석을 진행한 결과 sarcosine과 ornithine이 2.5배 이상 증가하였다. 이를 통해 부산물 B나 C를 30% 함유한 사료를 급이하였을 때 사육 원가를 절감하여 유충을 생산할 수 있을 것으로 사료된다.

KORAD (Korea Radioactive Waste Agency, http://www.korad.or.kr) has stored slightly contaminated ascon (asphalt coated concrete mixture) that was introduced to Gyeongju repository about a decade ago waiting for a final disposal. It is believed to be mainly contaminated by radioisotope 137Cs due to impurities introduced from the outside during the ascon manufacturing process. We studied characteristics of the radioactive waste to see whether this material would be proper enough to be disposed in Gyeongju LILW repository or be other ways to reduce the disposal volume including self-disposal before its final disposal otherwise. KORAD looked into the properness of characteristics of ascon in terms of WAC (Waste Acceptance Criteria) documented by KORAD that includes general chemical and physical properties of asphalt, density, size of grains, content of organic material and possibility of existence of chelate materials that qualitatively limited to be disposed by the criteria. And other associated characteristics such as gas generation and bio degradation were also investigated. Based on the data obtained from the study, we proposed various plausible solutions in associated with operational and disposal safety and economic view points. This study will be used for KORAD’s decision on how to control and safely dispose the spent ascon within a reasonable time period. And also those experiences may be applied for other LILW issues that require treatment or conditioning of radioactive wastes in the future.

Understanding the dispersion of xenon isotopes following a nuclear test is critical for global security and falls within the remit of both the Comprehensive Nuclear-Test-Ban Treaty (CTBT) and the International Noble Gas Experiment (INGE). This paper aims to show if it is possible to discriminate the source of xenon releases based on the atmospheric dispersion of xenon isotopes using HYSPLIT. Using ORIGEN and SERPENT simulations, four released scenarios are defined with four different fractionation times (i.e., 1 hour, 1 day, 10 days, and 30 days) after a 1kt TNT equivalent 235U explosion event. These time-delayed release scenarios were selected to certify the possibility of mis-determining xenon release source. We use the Lagrangian dispersion model for atmospheric dispersion to predict the concentration distribution of xenon isotopes under each scenario. The model allows us to better understand how these isotopes would distribute over time and space, offering valuable data for real-world detection efforts. To our knowledge, there have been no researches on the analysis of xenon isotopic ratios considering atmospheric dispersion. In this work, we focused on the atmospheric dispersion using HYSPLIT to characterize the xenon isotopic ratios from nuclear tests. In addition, we compared the xenon isotopic ratios obtained from the atmospheric dispersion with those from ORIGEN calculations, which would be helpful to discriminate the source of the xenon releases.

PURPOSES : The objective of this study is to determine the characteristics of nitrogen oxide (NOx) concentration in an exclusive median bus lane station. The hourly variations of NOx concentration and the effect of traffic volume on NOx concentration were analyzed using NOx measurement data and the number of vehicles at the station. METHODS : Data were collected using the chemiluminescence method for NOx concentration. Atmospheric information and traffic volume of buses were collected from the Korea Meteorological Administration and Bus Information System, respectively. RESULTS : As a result, the NO2 concentration in the test section was found to have a strong correlation with those in the atmospheric measurement station located near the test-bed. In addition, the average NOx concentrations in the test section were significantly higher than those of the other monitoring stations due to bus emissions. The average NOx concentration in the exit section was higher than that in the entry section owing to the vehicle’s frequent stops and fuel consumption due to acceleration. During the measurement period, the average NOx concentration was measured as approximately 33 % higher in the exit section than in the entry section. In addition, the NOx concentration at the bus station was found to increase as the bus dwell time increased, rather than the number of bus passages. CONCLUSIONS : This study provides clear characteristics of the NOx correlations with traffic information in an exclusive median bus lane station. It was shown that the NOx concentration at the bus station increased as the number of passes and bus dwell time increased. According to the coefficient of determination, the dwell time is more closely correlated to the NOx concentration at the bus station than the number of bus passes, indicating that it is a better parameter for predicting NOx concentration at bus stations.

The pitch-based activated carbons were prepared with KOH/KMnO4 as a multiple function activation agent to increase the specific capacitance of a supercapacitor electrode active material. And the porous structure and electrochemical properties of activated carbon were analyzed on varying amounts of KMnO4. KMnO4 was decomposed into K2O, MnO, and O2 at the activation temperature of KOH, and MnO was introduced to activated carbon. K2O/ O2 reacts with a surrounding pitch to generate micropores and forms a pathway that exposes MnO to the outside. It also affects to the specific surface area of activated carbon like KOH chemical activation. The enhanced specific surface area and introduced MnO in activated carbon led to a 28.9% increase in specific capacitance.

본 연구는 금잔화를 꽃차로 이용하기 위해 열풍 건조 처리 시간에 따른 항산화 물질함량 및 항산화 활성을 분석하고, 최적 처리 시간을 구명하기 위해 수행하였다. 식용꽃 금잔화를 60℃에서 5시간, 10시간, 15시간 열풍건조 한 뒤 Hunter value를 측정하고 95% 에탄올을 용매로 하여 추출하였다. 항산화 물질인 총 폴리페놀, 총 플라보노이드, 총 카로티노이드 함량과 DPPH radical 소거 활성을 통한 항산화 활성, 이를 통한 항산화 물질 함량과 항산화 활성 간의 상관관계를 분석하였다. 처리시간이 증가함에 따라 Hunter value L 값과 +b값이 모두 감소하는 경향을 보였으며, 15시간 처리구에서 다소 많이 감소하였다. 또한, 항산화 물질 함량을 조사한 결과, 총 폴리페놀 함량은 처리 시간에 따른 차이는 없었으나 총 플라보노이드 함량과 총 카로티노이드 함량은 5시간과 10시간 처리시 함량이 다소 높았으며, 처리 시간이 증가함에 따라 감소하여 15시간 처리시 대조구와 차이가 없는 것으로 조사되었다. DPPH radical 소거 활성 분석 결과, 5시간과 10시간 처리시 대조구보다 활성이 높았으며, 총 카로티노이드가 DPPH radical 소거 활성 간의 상관관계가 높은 것으로 나타났다(p≤0.01, r=0.610). 따라서, 열풍건조한 금잔화는 총 카로티노이드가 항산화 활성에 기여하며, 5시간 및 10시간 열풍건조 처리가 금잔화의 항산화 물질 함량 및 활성 증가에 효과적인 것으로 판단되나 식물의 열처리 가공에 있어 오랜 시간은 내부 조직 및 항산화 물질 파괴에 영향을 미칠 수 있기 때문에 금잔화 열풍 건조 처리 시 5시간이 효과적일 것으로 판단된다.

Manufactured part based on the drawing must be inspected for quality control. If no restraint note is specified on the drawing, the part should be inspected without any clamping(restraining). However if there is a restraint note, the part is non-rigid part. When inspecting non-rigid parts, there are two areas that need special attention: proper restraining of the part and determining which tolerances are checked in the retrained state. Mounting and restraining the part on the appropriate datum features is the first area. When retraining the part, the only forces that should be used are the ones described in the restraint note. The sequence for applying the restraining force specified on the drawing should be followed. The location, direction and amount of force should be in accordance with the restraint note. Once the part is restrained, the tolerances can be verified. When inspecting non-rigid part, the inspector needs to determine which dimensions and tolerances are to be checked in the retrained state. Careful reading of the restraint note will indicate if all or certain tolerances are to be checked in the restrained condition. Each feature control frame should be examined for the use of free state modifier. If a free state modifier is specified, the geometric control should be inspected with the part in the free state. When inspecting a non-rigid part on a coordinate measuring machine(CMM), fixture and clamp should be used to locate and clamp the part. The fixture will establish the proper part restraint conditions and datums. If a fixture is not used when inspecting non-rigid parts, it will be difficult or impossible repeatable measurements.

The honey bee soluble acetylcholinesterase 1 (AmAChE1) is overexpressed under the overwintering and brood rearing-suppressed conditions. To investigate the role of AmAChE1 in regulating acetylcholine (ACh) titer, ACh concentrations both in the head (neuronal) and abdomen (non-neuronal) were analyzed. ACh titer was significantly lower in both tissues of worker bees under the overwintering and brood rearing-suppressed conditions compared to control bees. The expression levels of another two factors that regulate ACh titer, choline acetyltransferase (AmAChT) and acetylcholinesterase 2 (AmAChE2), were not altered as judged by qPCR and native PAGE, suggesting that the lower ACh titer was mainly regulated by AmAChE1. For precise verification of AmAChE1 as an ACh titer regulator, honey bees were put under brood rearing-suppressed condition to induce AmAChE1 and injected AmAChE1 dsRNA to knock down the gene. The ACh titer of AmAChE1-knocked down honey bees was 1.9 and 2.6 folds higher than that of control bees in head and abdomen, respectively. Taken together, in spite of its extremely low catalytic activity, the overexpression of AmAChE1 is likely to be related with the low level of ACh homeostasis, perhaps via ACh sequestration, under brood rearingsuppressed condition, and likely induce metabolic changes through ACh receptors-related pathways.

Small hive beetle (Aethina tumida) (SHB) is an invasive species to most northern hemisphere countries, including Korea. In an attempt to obtain basic information for efficient management of SHB, genes encoding conventional insecticide targets [voltage-sensitive sodium channel α-subunit (VSSC) and acetylcholinesterase (AChE)] were annotated and characterized following the analysis of whole transcriptomes of adults and larvae. A single VSSC gene was identified but no apparent mutations associated with pyrethroid resistance were detected. Genes encoding two AChEs (AtAChE1 and AtAChE2) were identified from the SHB transcriptome. AtAChE1 was determined to be the main catalytic enzyme, thereby being a toxicologically more relevant target. No apparent mutations associated with resistance to organophosphorus and carbamate insecticides was identified in the AtAChE1 gene, whereas the S238G mutation, originally identified from the Colorado potato beetle, was detected in the AtAChE2 gene.

The honey bee soluble acetylcholinesterase 1 (AmAChE1) is overexpressed under the overwintering and brood rearing-suppressed conditions. To investigate the role of AmAChE1 in regulating acetylcholine (ACh) titer, ACh concentrations in both the head (central nervous system) and abdomen (peripheral nervous system) were analyzed. ACh titer was significantly lower in both tissues of worker bees under the overwintering and brood rearing-suppressed conditions compared to control bees. Interestingly, the expression levels of choline acetyltransferase (AmChAT) and molecular marker genes of immune systems were significantly reduced in honey bee head under the same conditions. Taken together, ACh titer appears to be reduced via a cooperative interaction of the AmAChE1 overexpression and AmChAT underexpression and to be linked to reduced inmmune responses under the overwintering and brood rearing-suppressed conditions. The roles of AmAChE1 (with little catalytic activity) and AmChAT in the ACh homeostasis and signaling was discussed in the contexts of immune response and longevity regulation in honey bees.

Among two different acetylcholinesterase (AmAChE1 and AmAChE2) of the western honey bee, the soluble AmAChE1might be related with a stress response as judged from its over-expression in honey bee workers when brood rearingwas suppressed. In this study, to ensure the nature of AmAChE1 responding to stress factors, the expression patternsof AmAChE1 were investigated following various treatments, including varroa mite infestation, bacterial challenge, broodrearing suppression, thermal stresses, chemical treatments, ultraviolet B irradiation, starvation, water restriction and crowdingstress. In addition, transcription profiles of four heat shock protein genes known as general stress markers and vitellogeningene, which is induced in several stress conditions, were tested as positive references. In every tested condition, onlybrood rearing suppression and heat shock were related with the expression of AmAChE1.

We report on the dispersion state of partially reduced graphene oxide (PRGO) in organic solvents, namely methyl ethyl ketone, ethyl acetate, methylene chloride, toluene, and xylene, by controlling the carbon to oxygen (C/O) atomic ratio of the PRGOs. A two-phase solvent exchange method is also proposed to transfer PRGO from water to an aprotic solvent, such as methyl ethyl ketone. We achieve relatively good dispersion in aprotic and non-polar solvents by controlling the C/O atomic ratio of the PRGOs and applying the two-phase solvent exchange method. There is an increase in the glass transition temperatures with the dispersion of PRGOs into amorphous polymers, in particular a 4.4°C increase for poly(methyl methacrylate) and 3.0°C increase for polycarbonate. Good dispersion of PRGO in a nonpolar polymer, such as linear low density polyethylene, is also obtained.

There are two different types of acetylcholinesterase (AChE1 and AChE2) in the western honeybee as in most of insects. It is suggested that soluble AmAChE1 might be related with a stress response as judged from its elevated expression level in honey bee workers when brood rearing was suppressed. In this study, to ensure the nature of AmAChE1 responding to stress factors, the expression patterns of AmAChE1 following heat shock, brood rearing suppression and chemical treatments (Imidacloprid and fluvalinate) were investigated. Also, several heat shock protein (hsp) genes (hsp10, hsp60, hsp70 and hsp90) known as general stress markers were tested as positive references. Heat shock induced expression of every tested hsp along with AmAChE1. In brood rearing-suppressed worker bees, 7 days old bees showed much higher expression level of AmAChE1 and hsp90 compared to control honey bees. However, treatment of imidacloprid and fluvalinate did not induce any apparent overexpression of these genes. These results confirm that both HSP and AmAChE1 genes generally respond to temperature and brood rearing suppression and further suggest that AmAChE1 can serve as a potential biomarker along with hsps for the detection of stress in honey bee colonies.

Two different types of acetylcholinesterae (AChE1 and AChE2) are present in majority of insects, including the Western honey bee. Out of the two honey bee AChEs (AmAChEs), the soluble AmAChE1 with little catalytic activity is widely distributed in both neuronal and non-neuronal tissues, including fat body. In this study, to identify stresss factors that can induce AmAChE expression, we tested various conditions that honey bees can encounter in natural setting, including heat shock, cold shock, bacterial challenge (Escherichia coli and Staphylococcus aureus) and Varroa mite infestations, and evaluated their effects on AmAChE expression. Among the stress factors tested, only heat shock condition induced AmAChE expression in a dose dependet manner. This finding suggests that one function of AmAChE1 is related with thermoregulations, especially against heat shock stress in honey bees.

Aneurysmal bone cyst (ABC) in maxilla is a rare and benign lesion but shows extensive bony destruction, occasionally accompanied with secondary osseous lesions, i.e., central giant cell granuloma, ossifying fibroma, fibrous dysplasia, etc. As the pathogenesis of ABC has not been clearly defined, ABC is diagnostically challenged due to its variable histological features. A 17-year-old boy showed a huge radiolucent lesion at right anterior maxilla, which was accidentally found in routine dental-radiological examination for orthodontic treatment. He had no medical history of systemic disease, and did not remember any traumatic experience on his right anterior maxilla. The radiolucent lesion involved periapical area from right central incisor to right first premolar, and was clinically diagnosed as odontogenic keratocyst. During surgical operation a cyst-like sac was enucleated with severe hemorrhage. In the histological observation the thick fibrous sac showed no lining epithelium, and its luminal side disclosed multiple aneurysmal spaces which were shrunken and almost obliterated. The fibrous sac itself was hyperplastic with abundant vascular channels, and produced fibromatous thickening associated with ossifying trabecular bones. This fibro-osseous tissue was hamartomatous, which was not directly connected and organized with marrow bone of maxilla. Finally, the present case was diagnosed as secondary type ABC differentially from traumatic bone cyst (TBC), odontogenic cyst, and central reparative granuloma. And it was presumed that the hamartomatous proliferation of fibro-osseous tissue in the cystic sac of ABC could produce the swelling pressure effect in the bone marrow similar to the overgrowth of central giant cell granuloma, ossifying fibroma, fibrous dysplasia, etc., in the secondary type ABC.