국립원예특작과학원에서는 밝은 화색과 안정적인 화형의 생 육이 우수한 빨간색 스탠다드 장미 품종을 육성하기 위해 진한 적색 스탠다드 장미 품종 ‘엔드리스러브(Endless Love)’를 모 본으로, 꽃잎수가 많고 안정적으로 가시가 적은 밝은 노란색 ‘페니레인(Penny Lane)’ 품종을 부본으로 인공교배하였다. 37 개의 교배실생을 양성해 1, 2, 3차에 걸친 특성검정 및 현장실증 을 통해 꽃이 크고 화형이 안정적이며, 재배안정성 및 생산성, 절화특성이 우수한 ‘원교 D1-390’을 최종 선발하였다. 2023년 ‘루비레드(Ruby Red)’로 명명하여 국립종자원에 품종보호출원·등록되었다. ‘루비레드’ 품종은 밝은 적색(R53C)을 가졌으 며, 꽃잎수가 32.8매, 화폭과 화고는 각각 10.9, 5.9cm로 대조 품종보다 크다. 절화장은 평균 71.7cm, 절화수명은 약 16.7일, 수량은 연간 168대/m2로 대조품종인 ‘레드스퀘어(Red Square)’ 대비 절화장이 길고 절화수명도 2배 이상 길며, 수확량도 1.4배 우수하다. 2023년 국내 육성 장미 품종 서울식물원 관람객 대상 공동평가회에서 스탠다드 장미 중 우수한 평가를 받았으며, 현 장 실증 결과 농가별로 균일하고 우수한 수량과 절화품질을 보 였다. 절화용 장미 ‘루비레드’ 품종은 밝은 적색과 우수한 화형 을 가지는 품종으로 해외 대체 품종으로 국내에서 많이 재배될 것으로 기대된다.

본 연구는 서바이벌 게임에서 맵의 디자인 요소를 분석하고 표준화하는 것을 목표로 했다. 상 용 게임 10개를 조사하여 네 가지 주요 맵 유형을 파악하였고, 이를 바탕으로 유니티 에디터를 사용해 네 가지 유형의 맵을 개발 및 구현하였다. 무작위 위치에 장애물을 스폰하고, 타일 재 배치 시스템을 통해 맵을 무한대로 재배치할 수 있도록 했다. 또한, Update() 메서드를 조정해 타일 변위 오류를 해결했다. 마지막으로, ML 에이전트를 사용해 맵을 테스트했으며, 에이전트 가 환경을 탐색하고 장애물과 적대 대상을 인식 및 공격하며 각기 다른 네 가지 맵에서 효과 적으로 대응하는 모습을 확인했다.

InP quantum dots (QDs) have attracted researchers’ interest due to their applicability in quantum dot light-emitting displays (QLED) or biomarkers for detecting cancers or viruses. The surface or interface control of InP QD core/ shell has substantially increased quantum efficiency, with a quantum yield of 100% reached by introducing HF to inhibit oxide generation. In this study, we focused on the control of bandgap energy of quantum dots by changing the Zn/(In+Zn) ratio in the In(Zn)P core. Zinc incorporation can change the photoluminescent light colors of green, yellow, orange, and red. Diluting a solution of as-synthesized QDs by more than 100 times did not show any quenching effects by the Förster resonance energy transfer phenomenon between neighboring QDs.

The large copper butterfly Lycaena dispar (Haworth, 1803; Lepidoptera: Lycaenidae) has been categorized as a near-threatened species (NT) in South Korea from 2012 mainly due to limited distribution. In this study, we visited 36 sites spread across all South Korean provinces to verify the distributional range of the species and sequenced mitochondrial COI for 53 individuals from nine sites. We observed L. dispar at 15 sites in six provinces, including the two previously known provinces, indicating a southward range expansion. The in-field monitoring and genetic data collectively suggested that L. dispar does not have a limited distribution nor is it isolated, indicating that it should be reclassified as less vulnerable. Our study demonstrates that the combination of field and genetic data can provide a more reliable assessment of the stability of a species.

The clearwing moth, Synanthedon bicingulata (Staudinger, 1887), is a pest that infests various species of cherry trees. However, genetic information regarding the genus Synanthedon including S. bicingulata, is limited. In this study, we sequenced a complete mitochondrial genome (mitogenome) of the species. The 16,255 bp of S. bicingulata mitogenome differs from the typical gene arrangement formed in Lepidoptera: trnQ-trnS2-trnM-trnI arrangement between the A+T-rich region and the ND2 junction. Moreover, the genome has untranslated repetitive sequences in the intergenic space between lrRNA and trnV, as well as the CGA start codon in COI and the TTG start codon in ATP8. Similar observations are noted in species belonging to the tribe Synanthedonini within the genus Synanthedon.

Tropilaelaps mercedesae Anderson and Morgan, 2007 (Acari: Laelapidae) is a serious ectoparasite of the brood of several honey bee species. Among the four recognized species of Tropilaelaps, Korean population was renamed as T. mercedesae from T. clareae on the basis of morphological evidences and genetic data. In this study, we report the complete mitochondrial genome (mitogenome) sequence of T. mercedesae. The 15,119-bp long mitogenome has an identical gene arrangement to that of Chinese sample reported previously. Comparison of two geographic samples showed COII, ND5, ND4, ND6, CytB, and ND1 to have higher number of variable sites than COI, which is often used for population-level study, suggesting these genes to have potential usefulness for population genetic study. The mitogenome sequence of T. mercedesae from Korea could be useful for species identification for geographic samples, trace of the origin of local populations, and illustration of evolutionary distinction among Tropilaelaps species either using part of or whole genome.

Spodoptera eridania and S. ornithogalli (Lepidoptera: Noctuidae), which are polyphagous pests that damage various crops such as tomatoes and beans are regulated quarantine species that are highly likely to invade South Korea. Therefore, it is crucial to promptly and accurately identify the presence of S. eridania and S. ornithogalli in crop fields to effectively eradicate as a regulated quarantine species. In this study, we developed a loop-mediated isothermal amplification (LAMP) assay, which allows for rapid in-field identification. To develop the LAMP　assay, we selected target species-specific genomic regions from the whole-genome sequences of one target and 13 other lepidopteran species. We validated each five and six primer sets that consistently produced positive reactions in S. eridania and S. ornithogalli, respectively. To test the sensitivity of the each locus, LAMP reactions were performed using various reaction times using crude DNA, which was extracted from various types of adult tissues. All sensitivity tests were also successful.

Since rice is the main food in Korea, there are no regulations on corn milling yet. Corn is known as one of the world's top three food crops along with wheat and rice, and it is known that 3.5 billion people worldwide use corn for food. In addition, corn mills are not developed or sold in Korea, but the use of corn mills is increasing significantly in many countries in Southeast Asia. In the Philippines, as Korea's rice mill import increases, Korea's KAMICO (Korea Agricultural Machinery Industry Cooperative) and domestic company A agreed to develop a corn mill jointly with PHilMech, an organization affiliated with the Philippine Ministry of Agriculture. However, research on corn milling was very insignificant, so the development was carried out based on the technology of Korea's rice mill. Rice milling is performed by peeling off the skin of rice and producing brown or white rice, so it is carried out by removing the skin and cutting the skin. On the other hand, in the corn mill, the skin of the corn is peeled, pulverized and selected to produce main products suitable for edible use. Therefore, in order to develop a corn mill, processes such as peeling, transfer, grinding, sorting, and by-product separation are required, and suitable parts must be developed. In addition, the performance must be gradually improved through experiments in which corn is repeatedly milled. The Philippines produces 7.98 million tons/year of corn, which is about 100 times that of Korea, and is mostly consumed as a staple food. This is about 10% of the total crop production in the Philippines. In addition, the main cultivation complexes of corn are the mountainous regions of Tarlac or Pangasinan, and the produced corn is 72.4% of the so-called yellow corn called Arabel and Sarangani, and the remaining 27.6% are known as white corn. In this study, it was intended to produce grains of 2.5 mm or less suitable for food for yellow corn and to develop a corn mill for 200 kg per hour. Detailed conditions for development are stipulated as more than 55% of the main product recovery rate, more than 31% of the by-product recovery rate, less than 5% of the raw material loss rate, and more than 80% of the embryo dislocation rate. In this study, to achieve this, the overall process of the corn mill was developed, and the optimal conditions for the corn mill were obtained through the development of parts and empirical tests to improve performance. In addition, it was intended to achieve the development goal by evaluating and analyzing the performance of each part so that it did not conflict.

국내 유입 가능성이 높은 검역 관리해충인 Spodoptera eridania 및 S. ornithogalli는 전 세계적으로 토마토, 콩 등 여러 종의 작물을 가해하는 광식성 해충이다. 이에 따라 국내 유입 시 해당 작물에 높은 경제적 피해를 입힐 가능성 이 있으므로 신속 정확한 진단이 필요한 실정이다. 따라서 본 연구에서는 상기 두 종을 대상으로 현장 활용이 가능한 LAMP 진단법 개발을 수행하였다. 표적종 두 종 및 비표적종 11종(국내 발생 Spodoptera 종 및 동일 기주 가해종 등)의 전장유전체 정보를 확보한 후 비교 분석을 통해 각 표적종 별 특이적 영역을 확보한 후 해당 영역을 대상으로 LAMP 프라이머를 제작하였다. DNA 농도 10 ng/μL, 반응시간 40분을 기준으로 LAMP 진단을 수행한 결과, Spodoptera eridania는 5개의 LAMP 진단 마커를 개발하였고, S. ornithogalli는 3개의 LAMP 진단 마커를 개발하였다.

Bombyx mandarina (Lepidoptera: Bombycidae), the presumed ancestor of B. mori, has long been a subject of study to illustrate the geographic relationships in connection with origin of B. mori. We report 97 mitochondrial genome (mitogenome) sequences of B. mandarina collected from Korea and Japan. Phylogenetic and population genetic analyses showed that all individuals of B. mandarina collected in Korean localities formed a strong group together with all individuals originated from northern China (mainly north of the Qinling-Huaihe line) and some of southern China. This group was placed as the sister group to B. mori strians suggesting that this group had been served as an immediate progenitor for B. mori.

Non-destructive estimation of leaf area is a more efficient and convenient method than leaf excision. Thus, several models predicting leaf area have been developed for various horticultural crops. However, there are limited studies on estimating the leaf area of strawberry plants. In this study, we predicted the leaf areas via nonlinear regression analysis using the leaf lengths and widths of three-compound leaves in five domestic strawberry cultivars (‘Arihyang’, ‘Jukhyang’, ‘Keumsil’, ‘Maehyang’, and ‘Seollhyang’). The coefficient of determination (R2) between the actual and estimated leaf areas varied from 0.923 to 0.973. The R2 value varied for each cultivar; thus, leaf area estimation models must be developed for each cultivar. The leaf areas of the three cultivars ‘Jukhyang’, ‘Seolhyang’, and ‘Maehyang’ could be non-destructively predicted using the model developed in this study, as they had R2 values over 0.96. The cultivars ‘Arihyang’ and ‘Geumsil’ had slightly low R2 values, 0.938 and 0.923, respectively. The leaf area estimation model for each cultivar was coded in Python and is provided in this manuscript. The estimation models developed in this study could be used extensively in other strawberry-related studies.

프리지아 ‘Sunny Gold’는 농촌진흥청 국립원예특작과학원 에서 2010년 노랑색 반겹꽃 프리지아 육성계통 ‘036010’을 모본으로 진노란색 홑꽃 ‘Golden Flame’을 부본으로 교배하여 획득한 종자로부터 2011년 진노란색 겹꽃의 향기가 강한 프리지아 계통을 선발하여 품종화 하였다. 2011년부터 2016년까지 개화 생육특성검을 수행하였으며 핵심수요자의 기호도 평가를 통해 선발되어 2017년 ‘Sunny Gold’ 로 명명되었다. ‘Sunny Gold’는 RHS color chart YO17B의 노란색 겹꽃 프리지아 품종으로 화폭은 6.7cm로 대조품종 ‘Golden Flame’ 6.1cm에 비해 크고, 분지수는 6.5로 다수확성 품종이다. 초장이 101.9cm로 초세가 강하다. ‘Sunny Gold’의 소화수 및 소화장은 각각 13.0개, 9.3cm이며 개화소요일수는 137.7일이다. 이 품종의 절화수명은 약 9일이며 자구번식력은 5.3배로 대조 품종 ‘Golden Flame’ 4.3배에 비해 우수하다. 전자코를 이용한 PCA분석결과 PC1과 PC2는 각각 99.3%와 0.6%로 전체 변이량의 99.9%를 반영하고 있다. Rader plot 분석결과 총 6개 센서에서 모두 ‘Sunny Gold’의 센서값이 향기가 강한 상용품종 ‘Yvonne’의 값에 비해 높게 나타나 ‘Sunny Gold’의 향기가 더 강한 것으로 나타났다.

목적: 이 연구는 안경과 선글라스에서 테와 렌즈의 형태와 색상에 대한 한국인과 중국인 소비자 집단의 선호도 차이를 조사하기 위하여 실시되었다. 방법: 한국에 유학 중인 중국인 학생 150명과 한국인 대학생 150명을 대상으로 설문조사를 실시하고 그 결과를 분석하였다. 안경광학 관련 전공자는 설문 대상에서 배제되었다. 중국인 학생들에게는 중국어 간체자로 번역된 설문지를 제공하였으며, 제공된 설문지는 한국 대학 석사과정에 유학 중인 중국인 원어민 학생이 한국어 설문지를 바탕으로 번역한 것이다. 결과: 중국인 소비자 집단은 안경보다 선글라스에서 글로벌 유명 브랜드를 더 선호하였으며, 한국산 안경 제품을 상대적으로 선호하는 것으로 나타났다. 또한, 무테 또는 반무테, 금색테, 투톤컬러 렌즈 항목에서 한국인 소비자 집단보다 높은 선호도를 나타냈다. 결론: 이 연구의 결과는 한국 안경 제조․유통 업체의 중국 시장 진출이나 중국인 고객 비율이 높은 안경원 의 판매 전략 수립에 기여할 수 있을 것으로 기대된다.

The infrastructure that man absolutely needs creates a lot of environmental load. The environmental load is quantified global environment pollution. So we can use LCA method for assess and control environmental load. In this study, we developed the environmental load estimating model to evaluate quickly in design stage when maintaining infrastructures facilities. Especially, we chose NATM tunnel because it is economical and there are many example of construction on public roads and expressway. First, we made a list of the breakdown cost by using collected unit cost of Korea Expressway Corporation and Seoul-Si about tunnel maintenance. So we chose major work classification. We selected the major classification such as pavement repairing inside tunnel, leaked surface treatment of tunnel, attached tile repairing inside tunnel and tunnel cleaning etc. We excluded concrete repairing because it is not easy to define maintenance factor about concrete repairing. Next, we made data bases of standard supply and resources need by specialist work classification. Using data bases, we was able to estimate environmental load by designating an input variable such as lane, pavement, length, tile repairing, leaked surface treatment and cleaning method. Lastly, we made environmental load estimating model after it is verified by comparing the results with the actual environmental load and estimated environmental load. Finally, our goal of this study is to develop the methodology that easily estimates the environmental load. Accordingly, the environmental load will be decreased by using this model in stage of planning, design and maintenance. Also, it is expected that the maintenance management estimating model developed from this study will be possible to do eco-friendly management of the road and tunnel construction.