eDNA(enviromental DNA)는 물, 토양, 대기 등 다양한 환경에서 채취한 생명체의 유전자 또는 그 유전자를 채취· 분석하는 기술로 생물을 직접적으로 관찰하지 않아도 생물이 남긴 흔적을 통해 종의 동정이 가능하다는 장점이 있다. 따라서, 야외에서 해충의 예찰조사, 외래종 감시 및 멸종위기종 모니터링 등 다양한 목적으로 활용될 수 있는 장점이 있다. 최근, 국제적으로 미생물, 수생태계 및 육상곤충 등 다양한 방면으로 eDNA가 연구되고 있으나 국내에서는 eDNA 연구가 수생태계, 미생물 등 일부 분야에서만 진행 중이며 육상곤충의 eDNA 연구는 미비한 실정이다. 따라서, 금번 연구에서 육상곤충에 활용할 수 있는 eDNA 실험방법 확립을 위해 기존문헌 참고 및 곤충분야에 접목하여 활용 가능한 육상곤충 샘플링 방법을 탐색 및 정리하였으며, 추후 eDNA 연구에 기반을 마련하고자 한다.

This research is conducted to analyze the compatibility of used monomers and produce the high functional hydrogel ophthalmic polymer containing silane and nanoparticles. VTMS (vinyltrimethoxysilane), TAVS [Triacetoxy(vinyl)silane] and cobalt oxide nanoparticles are used as additives for the basic combination of SilM (silicone monomer), MMA (methyl methacrylate) and MA (methyl acrylate). Also, the materials are copolymerized with EGDMA (ethylene glycol dimethacrylate) as cross-linking agent, AIBN (thermal polymerization initiator) as the initiator. It is judged that the lenses of all combinations are optically excellent and thus have good compatibility. Measurement of the optical and physical characteristics of the manufactured hydrophilic ophthalmic polymer are different in each case. Especially for TAVS, the addition of cobalt oxide nanoparticles increases the oxygen permeability. These materials are considered to create synergy, so they can be used in functional hydrogel ophthalmic lenses.

This research is carried out to analyze the effects of Styrene and PVP on the properties of silicone hydrogel lenses. Styrene group and PVP(Polyvinylpyrrolidone) are used as additives for a basic combination containing silicone monomer, TSMA(trimethylsilyl methacrylate) and DMA(n,n-dimethylacrylamide) added to the mix at ratios of 1~10 %. Silicone hydrogel lens is produced by cast-mold method. The polymerized lens sample is hydrated in a 0.9 % saline solution for 24 hours before its optical and physical characteristics are measured. Measurement of the physical characteristics of the produced material shows that the refractive index is 1.3682~1.4321, water content 77.11~45.73 %, visible light transmittance 95.14~88.20 %, and tensile strength 0.0652~0.3113 kgf. The results show a decrease of refractive index as the ratio of additives and water content decreases. The result of the stabilization test of polymerization show an increase of extractables along with increase of the ratio of additives, but the difference is not significant for all samples, so it can be judged that the stabilization of the polymer is maintained. Therefore, the additions of styrene and PVP should be taken into consideration for their effects on the physical properties of silicone hydrogel lens.

In this study, a multifunctional ophthalmic lens material with an electromagnetic shielding effect, high oxygen permeability, and high water content is tested, and its applicability is evaluated. Metal oxide nanoparticles are applied to the ophthalmic lens material for vision correction to shield harmful electromagnetic waves; the pyridine group is used to improve the antibacterial effect; and silicone substituted with urethane and acrylate is employed to increase the oxygen permeability and water content. In addition, multifunctional tinted ophthalmic lens materials are studied using lens materials with an excellent antibacterial effect (2,6-difluoropyridine, 2-fluoro-4-pyridinecarboxylic acid) and functional (UV protection, high wettability) lens materials (2,4-dihydroxy benzophenone, 2-hydroxy-4-(methacryloyloxy)benzophenone). To solve problems such as air bubbles generated during the polymerization process for the manufacturing and turbidity of the lens surface, polymerization conditions in which the defect rate is minimized are determined. The results show that the polymerization temperature and time are most appropriate when they are 110 oC and 40 minutes, respectively. The optimum injection amount of the polymerization solution is 350 ms. The turbid phenomenon that appears in lens processing is improved by 10 to 95% according to the test time and conditions.

This research is conducted to create a functional hydrogel ophthalmic lens containing nanoparticles. Carbon nanoparticles and PEGMEMA are used as additives for the basic combination of HEMA, MA, and MMA, and the materials are copolymerized with EGDMA as the cross-linking agent and AIBN as the thermal initiator. The hydrogel lens is produced using a cast-mold method, and the materials are thermally polymerized at 100 oC for an hour. The polymerized lens sample is hydrated in a 0.9% saline solution for 24 hours before the optical and physical characteristics of the lens are measured. The refractive index, water content, contact angle, light transmittance, and tensile strength are measured to evaluate the physical and optical characteristics of the hydrogel lens. The refractive index, water content, contact angle, UV-B light transmittance, UVA light transmittance, visible light transmittance, tensile strength and breaking strength of the hydrogel lens polymer are 1.4019~1.4281, 43.05~51.18 %, 31.95~68.61o, 21.69~58.11 %, 35.59~84.26 %, 45.85~88.06 %, 0.1075~0.1649 kgf and 0.1520~0.2250 kgf, respectively. The results demonstrate an increase in refractive index, tensile strength and breaking strength and a decrease in contact angle and light transmittance. Furthermore, the visible light transmissibility is significantly increased at PEG 10 %. It is clear that this material can be used for high-performance ophthalmic lenses with wettability, ultraviolet ray blocking effect, and tensile strength.

Purpose: This research was conducted to produce the functional hydrogel ophthalmic lens containing nanoparticles. Methods: Carbon nanoparticles and PEGMEMA were used as additives for the basic combination containing HEMA, MA, and MMA, and the material was copolymerized with EGDMA as the cross-linking agent and AIBN as the initiator. The hydrogel lens was produced by a cast-mold method, and the materials were thermally polymerized at 100° C for an hour. The polymerized lens sample was hydrated in a 0.9% saline for 24 hours before the optical and physical characteristics of the lens were measured. Results: The refractive index, water content, contact angle, light transmittance, and tensile strength were measured to evaluate the physical and optical characteristics of the hydrogel lens. The results showed that the refractive index, water content, contact angle, UV-B light transmittance, UV-A light transmittance, visible light transmittance and tensile strength of the hydrogel lens polymer was 1.4019~1.4281, 43.05~51.18%, 31.95~68.61°, 21.69~58.11%, 35.59~84.26%, 45.85~88.06% and 0.0657~0.1649kgf, respectively. It showed an increase of refractive index and tensile strength while decreased in contact angle and light transmittance. Conclusions: This material can be used for ophthalmic lenses with high performance of wettability, ultraviolet ray blocking effect, and tensile strength. Furthermore, the visible light transmissibility was significantly increased at PEG 10%.

Purpose: The optical and physical characteristics of hydrogel soft contact lens polymerized with various hydroxy substituted acrylate material were evaluated. Methods: This study used HEMA(2-hydroxyethyl methacrylate), HEA(2-hydroxyethyl acrylate), HPMA(hydroxypropyl methacrylate) with the cross-linker EGDMA(ethylene glycol dimethacrylate) and the initiator AIBN(azobisisobutyronitrile) for copolymerization. The polymerization of the contact lens material was conducted through thermal polymerization in 100℃ for about 1 hours. Results: The polymer by using thermal polymerization process for hydrogel lens was produced and the physical properties showed that the water content of the sample containing HEMA, HEA and HPMA was in the average of 37.06%, 82.12% and 21.57%, respectively. And also, refractive index of the sample containing HEMA, HEA and HPMA was in the average of 1.4330, 1.3540 and 1.4649, respectively. In case of the optical properties of the sample, the result showed that the near-UV transmittance was 82.67%, 80.32% and 79.83%, and the visible transmittance was 89.72%, 88.24% and 86.89%, respectively. Conclusions: Consequently, polymerization of the hydroxy substituted acrylate material was more shorten the molecular length, increased water content and decreased the refractive index of the soft contact lens.

Purpose : Recently, the eye disease associated with ultraviolet radiation were reported. In this study, the UV-block hydrophilic soft contact lens using 2-ethylhexyl trans-4-methoxy-cinnamate were manufactured and the optical properties of copolymerized materials were measured. Methods: The basic hydrophilic soft contact lens material with addition of Dhb(2,4-dihydroxy benzophenone) 0.5% ~ 1.0%, Thb(2,4,4-trihydroxy benzophenone) 0.5% ~ 1.0% and Hmb(2-hydroxy-4-methoxy benzophenone) 0.5% ~ 1.0% respectively were polymerized and the hydrophilic soft contact lens were manufactured by cast mould method. The lenses were stored in a 0.9% NaCl normal saline for analysis. Results: In the measurement of DHB samples, the optical transmittance showed the UV-B transmittance of 2.1 ~ 4.3%, UV-A transmittance of 19.0 ~ 27.2% and visible transmittance 88.8 ~ 90.1%. And also, in the case of THB samples, the optical transmittance of UV-B, UV-A and visible transmittance was 2.0 ~ 2.4%, 13.6 ~ 18.8% and 89.5 ~ 90.9%, respectively. Also, in the case of HMB samples, the optical transmittance of UV-B, UV-A and visible transmittance was 4.0 ~ 12.3%, 22.5~37.2% and 87.9 ~ 89.2%, respectively. Conclusions: Based on the results of this study, 2-ethylhexyl trans-4-methoxy-cinnamate with benzophenone materials were suitable for use as a material to UV-block hydrophilic lens.

Purpose: This study evaluated the physical and optical characteristics of hydrophilic contact lens polymerized with addition of 1-vinylimidazole in the basic hydrogel contact lens material, and in particular, the utility of 1-vinylimidazole as a contact lens material for ophthalmologic devices was investigated. Methods: This study used 1-vinylimidazole with the cross-linker EGDMA (ethylene glycol dimethacrylate), HEMA (2-hydroxyethyl methacrylate) and the initiator AIBN (azobisisobutyronitrile) for copolymerization. The polymerization of the contact lens material was conducted through thermal polymerization in 100°C for about 40 mins. To produce the high functional contact lenses, a cast mould method was used. Results: The physical properties of the hydrogel ophthalmic material were investigated by measuring the average value of refractive index, water content and optical transmittance. The refractive index of 1.4330~1.4408, water content of 36.10~38.59%, UV-A transmittance of 90.0~72.2% and UV-B transmittance of 88.6%~64.2% and visible ray transmittance of 89.2~91.8% were obtained. The transmittance for visible light was over 89% in all combinations with 1-vinylimidazole and the transmittance for UV reduced up to a certain level in certain combinations with 1-vinylimidazole. Conclusions: Based on the results of this study, the produced copolymer can be estimated to be suitable for use as ophthalmic lens material for UV- blocking effects.