The Euonymus defoliator moth, Pryeria sinica Moore (Lepidoptera: Zygaenidae), is a pest that causes considerable damage to the Euonymus genus, especially Euonymus alatus and Euonymus japonicus. The biological characteristics of P. sinica have been studied in China, Japan, Taiwan, and the United States, but there has been no research conducted on this species in Korea. Also, P. sinica has two dormant phases in each generation, one as eggs in winter and the other as pupae in summer. Our purposes are to study the biological characteristics of Korean populations of P. sinica and to examine the effects of temperature and photoperiod on summer diapause. The biological characteristics were investigated in laboratory conditions (25 ± 1 ℃, 65 ± 1% R.H., 16L:8D) and the number of eggs in an egg mass, developmental periods and mortality rate in each larvae stage, and adults’ life span were determined. The results showed that 190.7 ± 31.64 eggs were contained in one egg mass and it took 25.57 ± 0.61 days from 1st larval stage to the pre-pupal stage. P. sinica has 4 larval stages and each stage took 4.28 ± 0.21, 6.2 ± 0.55, 6.02 ± 0.68, and 8.93 ± 0.88 days. The mortality rate of larvae peaked at 22.5% in 3rd larval stage. The adults’ life span was 4.67 ± 0.97 days in males and 4.61 ± 1.82 days in females. To study summer diapause, we divided pupae into 4 groups. Both low temperature and short daytime were effective in shortening the pupal stage. The pupal stage was the shortest in group D (122.12 ± 1.24 days), in which the initial condition was 25 ℃-16L:8D and the altered condition was 16 ℃ -12L:12D, and the longest in group A (161.92 ± 3.15 days, 25 ℃-16L:8D). These data could be utilized to propose the optimal timing for controlling the population of P. sinica.

This study investigated the seasonal occurrence of bark and wood-boring Coleoptera in Pinus densiflora (Siebold & Zucc.) (Pinales: Pinaceae), and Larix kaempferi (Lamb.) (Pinales: Pinaceae) stands using multi-funnel traps baited with pine volatiles in Korea. The number and species of bark and woodboring beetles caught in traps baited with ethanol, α-pinene, and ethanol+α-pinene were compared to determine the effective attractants. In addition, the effects of other pine volatiles, such as (-)-β-pinene, β-caryophyllene, (±)-limonene, β-myrcene, and 3-carene, were investigated. A total of 13,134 wood-boring beetles from 150 species were collected from pine and larch stands from 2019 to 2020. Tomicus minor (Hartig) (Coleoptera: Curculionidae) adults were more attracted to traps baited with α-pinene, whereas Xyleborinus saxesenii (Ratzeburg) (Coleoptera: Curculionidae), Cyclorhipidion pelliculosum (Eichhoff) (Coleoptera: Curculionidae), and Phloeosinus pulchellus (Blandford) (Coleoptera: Curculionidae) adults were more attracted to traps baited with ethanol. Hylurgops interstitialis (Chapuis) (Coleoptera: Curculionidae), Shirahoshizo genus group, Rhagium inquisitor (Linne) (Coleoptera: Cerambycidae) and Rhadinomerus maebarai (Voss & Chûjô) (Coleoptera: Curculionidae) were more frequently attracted to traps baited with ethanol+α-pinene than to traps baited with other attractants. The addition of 3-carene to ethanol+α-pinene enhanced the capture of H. interstitialis, R. inquisitor, and Hylobius (Callirus) haroldi (Faust) (Coleoptera: Curculionidae).

A low- and intermediate-level radioactive waste repository contains different types of radionuclides and organic complexing agents. Their chemical interaction in the repository can result in the formation of radionuclide-ligand complexes, leading to their high transport behaviors in the engineered and natural rock barriers. Furthermore, the release of radionuclides from the repository can pose a significant risk to both human health and the environment. This study explores the impact of different experimental conditions on the transport behaviors of 99Tc, 137Cs, and 238U through three types of barrier samples: concrete, sedimentary rock, and granite. To assess the transport behavior of the samples, the geochemical characteristics were determined using X-ray diffraction (XRD), X-ray fluorescence (XRF), Fouriertransform infrared spectroscopy (FTIR), scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM-EDS), and Brunauer-Emmett-Teller (BET) analysis. The adsorption distribution coefficient (Kd) was used as an indicator of transport behavior, and it was determined in batch systems under different conditions such as solution pH (ranging from 7 to 13), temperature (ranging from 10 to 40°C), and with the presence of organic complexing agents such as ethylenediaminetetraacetic acid (EDTA), nitrilotriacetic acid (NTA), and isosaccharinic acid (ISA). A support vector machine (SVM) was used to develop a prediction model for the Kd values. It was found that, regardless of the experimental parameters, 99Tc may migrate easily due to its anionic property. Conversely, 137Cs showed low transport behaviors under all tested conditions. The transport behaviors of 238U were impacted by the order of EDTA > NTA> ISA, particularly with the concrete sample. The SVM models can also be used to predict the Kd values of the radionuclides in the event of an accidental release from the repository.

The organic complexing agents such as ethylenediaminetetraacetic acid (EDTA), nitrilotriacetic acid (NTA), and isosaccharinic acid (ISA) can enhance the radionuclides’ solubility and have the potential to induce the acceleration of radionuclides’ mobility to a far-field from the radioactive waste repository. Hence, it is essential to evaluate the effect of organic complexing agents on radionuclide solubility through experimental analysis under similar conditions to those at the radioactive waste disposal site. In this study, five radionuclides (cesium, cobalt, strontium, iodine, and uranium) and three organic complexing agents (EDTA, NTA, and ISA) were selected as model substances. To simulate environmental conditions, the groundwater was collected near the repository and applied for solubility experiments. The solubility experiments were carried out under various ranges of pHs (7, 9, 11, and 13), temperatures (10°C, 20°C, and 40°C), and concentrations of organic complexing agents (0, 10-5, 10-4, 10-3, and 10-2 M). Experimental results showed that the presence of organic complexing agents significantly increased the solubility of the radionuclides. Cobalt and strontium had high solubility enhancement factors, even at low concentrations of organic complexing agents. We also developed a support vector machine (SVM) model using some of the experimental data and validated it using the rest of the solubility data. The root mean square error (RMSE) in the training and validation sets was 0.012 and 0.016, respectively. The SVM model allowed us to estimate the solubility value under untested conditions (e.g., pH 12, temperature 30°C, ISA 5×10-4 M). Therefore, our experimental solubility data and the SVM model can be used to predict radionuclide solubility and solubility enhancement by organic complexing agents under various conditions.

A 63-year-old man with a 2-year history of a slowly growing mass in the chin area was referred to the Department of Oral and Maxillofacial Surgery, Dankook University Dental Hospital. Physical examination revealed a 1.2 × 1.0 cm bluish mass in the middle of his chin, which was tentatively diagnosed as a hemangioma. Considering the size and location of the lesion, an excisional biopsy was performed under local anesthesia. Bleeding and other complications were not observed. The results of histopathological examination revealed glomangioma. This study aimed to report a case of solitary glomangioma arising in the chin, which is not the usual location of this tumor. To the best of our knowledge, this is the first report of a solitary glomangioma in the chin area in the oral and maxillofacial surgery literature.

In this study, we investigate the deformation behavior of Hf44.5Cu27Ni13.5Nb5Al10 metallic glass powder under repeated compressive strain during mechanical milling. High-density (11.0 g/cc) Hf-based metallic glass powders are prepared using a gas atomization process. The relationship between the mechanical alloying time and microstructural change under phase transformation is evaluated for crystallization of the amorphous phase. Planetary mechanical milling is performed for 0, 40, or 90 h at 100 rpm. The amorphous structure of the Hf-based metallic glass powders during mechanical milling is analyzed using differential scanning calorimetry (DSC) and X-ray diffraction (XRD). Microstructural analysis of the Hf-based metallic glass powder deformed using mechanical milling reveals a layered structure with vein patterns at the fracture surface, which is observed in the fracture of bulk metallic glasses. We also study the crystallization behavior and the phase and microstructure transformations under isothermal heat treatment of the Hf-based metallic glass.