This study investigated and analyzed the recognition and needs for Korean communication competency among non-Korean learners who participated in an online Korean language course. To this end, the importance, performance, and necessity of the categories of communication competency recognized by Korean language learners were measured, and then IPA(Importancce-Performance Analysis: Martilla & James, 1977) analysis and Borich’s needs analysis(Borich, 1980) were used. After implementation, we examined whether there were differences in outcomes depending on learner variables. After examining the sub-items, it was found that there were differences in importance, current level, and need depending on the learner’s home country, and there were differences in current level, demand, and necessity depending on academic background and Korean language proficiency. In addition, there are differences in need depending on the learner’s reason for learning Korean, so it is necessary to respond to individual learnier’s needs according to learner variables when designing curriculum for online foreign language learners of Korean.

A 63-year-old man with a 2-year history of a slowly growing mass in the chin area was referred to the Department of Oral and Maxillofacial Surgery, Dankook University Dental Hospital. Physical examination revealed a 1.2 × 1.0 cm bluish mass in the middle of his chin, which was tentatively diagnosed as a hemangioma. Considering the size and location of the lesion, an excisional biopsy was performed under local anesthesia. Bleeding and other complications were not observed. The results of histopathological examination revealed glomangioma. This study aimed to report a case of solitary glomangioma arising in the chin, which is not the usual location of this tumor. To the best of our knowledge, this is the first report of a solitary glomangioma in the chin area in the oral and maxillofacial surgery literature.

In this study, we investigate the deformation behavior of Hf44.5Cu27Ni13.5Nb5Al10 metallic glass powder under repeated compressive strain during mechanical milling. High-density (11.0 g/cc) Hf-based metallic glass powders are prepared using a gas atomization process. The relationship between the mechanical alloying time and microstructural change under phase transformation is evaluated for crystallization of the amorphous phase. Planetary mechanical milling is performed for 0, 40, or 90 h at 100 rpm. The amorphous structure of the Hf-based metallic glass powders during mechanical milling is analyzed using differential scanning calorimetry (DSC) and X-ray diffraction (XRD). Microstructural analysis of the Hf-based metallic glass powder deformed using mechanical milling reveals a layered structure with vein patterns at the fracture surface, which is observed in the fracture of bulk metallic glasses. We also study the crystallization behavior and the phase and microstructure transformations under isothermal heat treatment of the Hf-based metallic glass.

We investigate the microstructural and magnetic property changes of DyH2, Cu + DyH2, and Al + DyH2 diffusion-treated NdFeB sintered magnets with the post annealing (PA) temperature. The coercivity of all the diffusiontreated magnets increases with increasing heat treatment temperature except at 910oC, where it decreases slightly. Moreover, at 880oC, the coercivity increases by 3.8 kOe in Cu and 4.7 kOe in Al-mixed DyH2-coated magnets, whereas this increase is relatively low (3.0 kOe) in the magnet coated with only DyH2. Both Cu and Al have an almost similar effect on the coercivity improvement, particularly over the heat treatment temperature range of 790-880oC. The diffusivity and diffusion depth of Dy increases in those magnets that are treated with Cu or Al-mixed DyH2, mainly because of the comparatively easy diffusion path provided by Cu and Al owing to their solubility in the Nd-rich grain boundary phase. The formation of a highly anisotropic (Nd, Dy)2Fe14B phase layer, which acts as the shell in the core-shell-type structure so as to prevent the reverse domain movement, is the cause of enhanced coercivity of diffusion-treated Nd-Fe-B magnets.

NF3 기체는 반도체, 디스플레이 산업에서 cleaning 또는 etching 가스로 많이 이용되고 있다. 6대 온실가스에 속하지는 않으나 차기 온실가스로 지구온난화지 수도 이산화 탄소에 비해 17200배 높다. 최근 NF3를 분리 농축 회수에 있어서 고분자 분리막, 복합막등의 다양한 연구가 이루어지고 있다. 하지만 실제 공정설계, 공정 최적화를 이루기 위한 분리특성의 연구가 미비한 상태이다. 이에 따라 본 연구에서는 NF3와 N2, O2의 온도와 압력에 따른 투과특성을 확인하고, 혼합기체에서의 주입농도와 Stage-cut에 따른 농축농도와 회수율에 대하여 연구하였다.

This study was conducted to investigate the effect of Perilla frutescens powder on physiological and sensory characteristics in macaronè. The perilla powders were added to macaronè at a weight percentage of 0, 2.5 and 4%. Color values (L-value, redness and yellowness index), total phenolics, DPPH radical scavenging activity, textures, total sugar contents and sensory characteristics of macaronè made with varying levels of perilla powder were measured. In sensory evaluation, significant differences (p<0.05 and p<0.01) were shown in color, sweetness, nuttyflavor, texture and overall acceptability depending on the addition level of perilla powders.

Effect of Cu and powder mixing with Cu-free (Nd, Dy)-Fe-B jet-milled powder on the magnetic properties of sintered magnets was investigated. The coercivity of a magnet prepared from the Cu-free (Nd, Dy)-Fe-B powder was about 10 kOe even though the alloy powder already contained some Dy (3.5 wt%). When small copper powder was blended, however, the coercivity of the magnet increased almost 100%, exhibiting about 20 kOe. On the contrary, the coercivity enhancement was moderate, about 4 kOe, when dysprosium content in the sintered magnet was simply increased to 4.9 wt% by the addition of small 3 powder.

본 연구에서는 PDMS (poly-dimethylsiloxane)와 PEBAX (polyether block amides) 분리막을 이용해 N2, O2, CF4와 SF6의 단일 기체 투과특성에 관하여 연구하였다. 다양한 압력으로 공급된 기체의 투과유량을 진공가압 연속흐름방식으로 측정하였으며, 이를 이용하여 투과도를 산정하였다. PDMS 분리막에서는 상부의 압력이 증가할수록 SF6를 제외한 다른 기체의 투과도는 감소하였다. 또한 SF6의 투과도가 CF4보다 높게 나타나고 있으며 이것은 SF6가 더 높은 임계온도를 가지고 있기 때문이다. PDMS 분리막에서 투과도는 O2 > N2 > SF6 > CF4 순으로 감소하였다. 반면에 PEBAX 분리막에서 기체의 투과 경향은 O2 > N2 > CF4 > SF6 순으로 감소하였다. 이러한 경향은 각 기체의 운동 반경의 크기(AA)(SF6 > CF4 > N2 > O2) 순서와 반대로 나타났다. SF6/CF4의 순수 기체의 선택도는 PDMS 분리막에서 0.7 MPa일 때 2.1로 나타났다.

In order to improve the remanence of (Nd, Dy)-Fe-B sintered magnets, we investigated the influence of compaction conditions such as packing density, applied field and green density on the magnetic properties. While the remanence decreased with increasing the packing density and green density, it increased with the increase of the applied field. In addition, XRD analysis revealed that the remanence was enhanced as the degree of powder alignment was improved. The green density was more influential on the remanence than the packing density and applied field.

중공사 고분자 분리막을 이용한 SF6를 분리 농축을 위한 운전조건을 결정하기 위해서는, 온도와 압력이 투과특성에 미치는 영향에 관한 연구가 필요하다. 본 연구에서는 다양한 온도와 압력이 부과된 조건에서 단일기체 투과실험을 수행하여, 중공사 고분자 분리막(PSF, PC, PI)을 통한 기체(N2, O2, SF6, CF4)의 투과특성을 연구하였다. 실험결과, 기체의 투과플럭스는 온도와 압력의 증가에 따라 일반적으로 증가하는 것으로 나타났으나, 분리막에 따른 투과플럭스의 차이가 관찰되었으며, 온도, 압력에 따른 투과플럭스 변화율은 기체의 특성(분자크기)에 따라 다른 것으로 나타났다. 온도 압력에 대한 투과플럭스를 3차원적으로 표현했을 때, 투과플럭스는 근사적인 평면 위에서 변화하는 것으로 관측되었다. 온도와 압력에 의한 투과플럭스 변화를 열역학적으로 분석하였으며, 투과플럭스 예측을 위한 경험적 모델로 평면특성의 1차 다항식 모델과 곡면 특성을 가진 2차 다항식 모델을 제안하였다. 그 결과 두 경험적 모델 모두 관측자료에 대한 높은 적합도를 보여 적용가능성을 확인하였다.

중전기의 유지 보수 및 교체 과정에서 절연체로 사용된 SF6 가스는 교체 충전과 정제과정에서 유입되는 공기와의 아크 방전에 의해 많은 종류의 부산물(N2, O2, CF4, SO2, H2O, HF, SOF2, CuF2, WO3 등)이 발생된다. 부산물 중에서도 대부분을 차지하는 것이 N2, O2, CF4이며, SF6가스를 재사용하기 위해서는 이들을 효과적으로 분리 회수하는 공정이 필요하다. 주요 부산물인 N2, O2, CF4와의 분리 효율 측면에서 분리막법은 기존의 흡착, 심냉법에 비하여 상대적으로 높은 효율을 보이고 있어 이에 대한 관심 또한 증가하고 있다. 따라서 본 논문에서는 중전기 산업에서 발생되는 SF6 가스 함유 농도 90 vol% 이상의 가스에 대하여 분리막법을 적용하여 N2, O2, CF4와 SF6 가스의 온도와 배출유량의 변화에 따른 분리 회수 가능성을 관찰하였다. PSF와 PC 중공사 분리막을 이용하여 고농도 SF6에 대한 분리 회수 실험 결과, PSF 분리막의 최대 회수율은 압력 0.3 MPa, 온도 25℃, 배출유량 150 cc/min에서 92.7%를 나타내었으며, PC 분리막에서는 압력 0.3 MPa, 온도 45℃, 배출유량 150 cc/min 일 때 74.8%의 최대 회수율을 나타내었다. 또한, 사용된 두 가지 분리막과 운전 조건에서 주요 부산물인 N2, O2, CF4의 최대 제거율은 각각 약 80%, 74%, 그리고 58.9%가 관찰되었다. 이로부터 분리막 공정은 고농도 폐 SF6 가스에서 주요 부산물로부터 SF6의 효과적인 분리 및 회수가 가능한 공정으로 적용할 수 있는 가능성을 파악 할 수 있었다.

In order to increase the coercivity of (Nd, Dy)-Fe-B sintered magnets without much reduction of remanence, small amount of Dy compounds such as and was mixed with (Nd, Dy)-Fe-B powder. After mixing, the coercivity of (Nd, Dy)-Fe-B sintered magnets apparently increased with the increase of Dy compound in the mixture. Addition of was more effective than for the improvement of coercivity. Reduction of the remanence by the addition of Dy compound, however, was larger than expected mostly due to unresolved coarse Dy compound in the magnet. EPMA analysis revealed that Dy was diffused throughout the grains in the magnet mixed with whereas Dy was rather concentrated around grain boundaries in the magnet mixed with .