Multi-elements doped TiO2 was prepared as a new photocatalyst in order to decrease the band gap of TiO2 by sol-gel process which can provide the large active sites of TiO2. Multi-elements were doped by using a single precursor, tetraethylammonium tetrafluoroborate (TEATFB). By the benefit of large specific surface area of TiO2 prepared by sol-gel process, catalysts showed initial fast removal of dye. The photoactivity showed that the doped catalysts significantly promote the light reactivity than undoped TiO2. The commendable photoactivity of prepared catalysts is predominantly attributable to the doping of anions which may reduce the band gap.

A CNT-TiO2 nano composite was prepared from titanium chloride (TiCl4) via sol-gel process using multi walled carbon nano tube (MWCNT) followed by calcination at 450℃. Spectral analysis revealed that the formed TiO2 resided on the carbon in anatase form. The effect of adsorption was investigated using aqueous solution of methylene blue and procion blue dye. The photochemical reaction of CNT-TiO2 composite in aqueous suspensions was studied under UV illumination in batch process. The reaction was investigated by monitoring the discoloration of the dyes employing UV-Visible spectro-photometeric technique as a function of irradiation time. The catalyst composites were found to be efficient for the photodegradation of the dye.

Cellulose nanofibers from microfibril cellulose (MFC) was prepared by hydrobromic acid (HBr) treatment at different concentrations. Polyvinyl alcohol (PVA) composite films at various loading level of nanofibers were manufactured by a film casting method. The analysis of degree of polymerization (DP), crystallinity (Xc) and molecular weight (Mw) of cellulose after acid treatment was conducted. The mechanical and thermal properties of the cellulose nanofibers reinforced PVA films were characterized using tensile tests and thermogravimetric analysis (TGA). The DP and Mw of MFC by HBr hydrolysis considerably decreased, but Xc showed no significant change. After acid hydrolysis, the diameter of cellulose nanofibers was in the range of 100 to 200 nm. The thermal stability of the films was steadily improved with the increase of nanofiber loading. There was a significant increase in the tensile strength of PVA composite films with the increase in MFC loading. Finally, 5 wt.% nanofiber loading exhibited the highest tensile strength and thermal stability of PVA composite films.

본 연구는 체세포 복제 한우 송아지의 생산에서 생시체중과 생존성과의 관계에 대하여 살펴보고자 실시하였다. 293두의 한우 대리모에 580개의 복제란을 이식하였다. 복제란의 임신율은 이식 후 50일까지 72.3%로 높았으나, 이후 급격하게 감소하였다. 평균 임신 기간은 복제 송아지에서 287일(279~295일)이었으며, 인공수정 송아지도 287일(255~293일)로 각각 나타났다. 복제 송아지의 생시체중(30.3kg)은 인공수정 송아지(23.7kg)에 비하여 유의하게 높은 것으로 나타났다(p<0.05). 자연분만(n=17, 29.9kg)과 제왕절개(n=14, 32.3kg)로 태어난 복제 송아지의 생시체중은 차이가 없었다. 하지만, 생후 175일 이전에 사망한 복제 송아지(n=18, 32.8kg)의 생시체중이 175일 이상 생존한 복제 송아지(n=11, 28.3kg)보다 유의적으로 높게 나타났다(p<0.05). 흥미로운 점은 생시체중이 15kg 이하(n=5) 또는 35kg 이상(n=9)인 복제 송아지들은 모두 생후 175일 이전에 폐사하였다. 생후 175일 이전에 폐사한 복제 송아지들(n=20)의 사망 원인은 미성숙 개체 2두(10.0%), 폐와 간 이상 2두(10.0%), 폐의 원인 4두(20.0%), 기형 4두(20.0%), 출생 후 급사(sudden death syndrome) 4두(20.0%) 및 기타 원인불명이 4두(20.0%) 등으로 분류되었다. 이상의 결과를 종합하여보면, 복제 송아지의 정상 생시체중이 6개월 이상을 생존하는데 가장 중요한 요소들 중의 한 가지임을 확인하였다.

IP-2형 운반용기는 정상운반조건에서의 자유낙하시험 및 적층시험을 수행한 후에 운반내용물의 분산 및 유실이 없어야 하며 외부표면에서의 방사선량률이 20%이상 증가할 수 있는 차폐능력의 상실이 없어야 한다. 본 연구에서는 두꺼운 철판을 구조재로 사용하며 볼트체결방식의 뚜껑을 가진 IP-2형 운반용기에 대한 구조 안전성을 평가하기 위한 해석적인 방안을 제안하였다. 해석적인 방법을 통하여 원자력발전소에서 발생된 방사성폐기물 드럼을 폐기물 처리시설에서 임시저장고까지 운반하기 위한 두 종류의 IP-2형 방사성폐기물 운반용기에 대하여 자유낙하조건에서 운반내용물의 분산 및 유실과 차폐손실이 없음을 확인하였다. 자유낙하조건에서 운반내용물의 분산 및 유실을 평가하기 위하여 최대 볼트단면 평균응력값과 최대 뚜껑열림량을 볼트의 인장강도와 뚜껑부에 존재하는 단차와 비교 평가하였다. 또한 최대 차폐두께 감소량을 이용하여 차폐손실을 평가하였다. 자유낙하조건에 대한 동적충돌해석을 검증하고 구조 안전성을 시험적으로 평가하기 위하여 자유낙하시험을 다양한 방향으로 실시하였다. 자유낙하시험에서는 운반내용물의 분산 및 유실은 볼트체결방식의 뚜껑에서 볼트의 파손 및 플랜지의 변형 등을 검사하여 평가하였으며, 차폐손실은 초음파 두께 측정기를 이용한 차폐두께를 측정하여 평가하였다. 해석에 대한 검증을 위하여 시험에서 취득한 변형률과 가속도를 동일한 위치에서 얻어진 해석결과와 비교하였다. 해석결과는 시험결과에 비하여 보수적인 결과를 보여주므로 해석에서 입증한 IP-2형 방사성폐기물 운반용기의 안전성은 보수적인 결과이다. 마지막으로 유한요소해석을 통하여 적층조건에 대한 IP-2형 방사성폐기물 운반용기는 안전함을 입증하였다. 적층해석에서 차폐체의 응력은 항복응력에 비하여 1/3정도의 작은 값을 보였다. 두 종류의 IP-2형 방사성폐기물 운반용기는 정상운반조건에서의 자유낙하시험 및 적층시험에 대하여 안전함을 입증하였다.

For an accurate rainfall-runoff simulation in the river basin, it is important to consider not only evaluation of runoff model but also accurate runoff component. In this study long-term runoffs were simulated by means of watershed runoff model and the amounts of runoff components such as upstream inflow, surface runoff, return flow and dam release were evaluated based on the concept of water budget. SSARR model was applied to Daecheong basin, the upstream region of Geum river basin, and in turn the monthly runoff discharges of main control points in the basin were analyzed. In addition, for the purpose of providing the basic quantified water resources data the conceptual runoff amounts were estimated with water budget analysis and the reliability of the observations and the monthly runoff characteristics were investigated in depth. The yearly runoff ratios were also estimated and compared with the observations. From the results of the main control points, Yongdam, Hotan, Okcheon and Daecheong, the yearly runoff ratios of those points are consistent well with data reported previously.

This study was investigated experimental condition which is able to evaluate photocatalytic activity of various commercial TiO₂. The experiments were performed for three representative substances (ethanol, phenol and methylene blue) and four kinds of commercial TiO₂, under the experimental conditions such as pH, reactant concentration, amount of TiO₂, reaction time and UV intensity. The optimum experimental conditions to evaluate photocatalytic activity were as follows : for ethanol, the initial concentration 1000 ppm, initial pH 8, TiO₂ loadings 0.1 wt%, and reaction time 90 minutes: for phenol, the initial concentration 200 ppm, initial pH 8, TiO₂loadings 1 wt%, and reaction time 60 minutes: for methylene blue, the initial concentration 200 ppm, initial pH 4, TiO₂ loadings 0.5 wt%, and reaction time 30 minutes.

Laboratory sorption isotherm batch studies have been attempted to elucidate interaction of synthetic pyrethroids (bifenthrin and permethrin) with sediments and their fractions. As a nonlinear isothermal model, the Freundlich equation was applied to sorption results obtained from sediments to investigate the relationship between synthetic pyrethroids and sediments containing different amounts of organic carbon. Results demonstrated that the sorption capabilities of bifenthrin and cis- and trans-permethrin was in the order of bifenthrin, cis-permethrin and trans-permethrin, respectively, indicating that adsorbed bifenthrin was the most stable followed by cis- and trans-permethrin in all sediments. Their sorption capability was closely related to organic carbon contents in sediments. Higher sorption was observed in sediments containing higher organic carbon contents. Sorption study extended into the fractions, clay and humic acids, extracted from a sediment, indicated that higher sorption capacity in humic acids occurred than in the clay of both examined bifenthrin and permethrin. This study demonstrates the sorption of synthetic pyrethroids with sediments, and will help in the understanding of the transport and fate of synthetic pyrethroids existing in field sediments.