Black pepper (piper nigrium L.) is a spice commonly used but has a problem with microbial control, so it needs non-thermal decontamination method for product quality of dried foods. Intense pulsed light (IPL) technology is a non-thermal method for superficial decontamination of foods to inactivate pathogenic microorganisms by using high peak power and short duration pulses of a broad-spectrum (170-2600 nm) using a xenon lamp. The objective of this study was to reduce total number of bacteria in ground black pepper effectively by combined treatments of IPL and immobilized TiO2 photocatalyst. Self-designed cyclone type of pilot-scaled IPL device (> 5 kg/h) was used, which makes samples to flow cyclonically in a vacuum space longer time rather than moving vertically. Using this device alone, without TiO2 coated, 0.3-0.6 log reductions were achieved under a total energy fluence of 14.85 J/cm2 (DC voltage; 1200, 1800, and 2400 V, pulse duty; 0.5, 2.1, and 3.0 ms, treatment time; 60, 120, 180, 240, and 300 s, frequency; 2 Hz). Subsequently, TiO2-coated quartz plates with different layers between light source and samples were installed to observe the effect of photocatalyst and the efficiency of decontamination was improved slightly. However to increase the effect of the photocatalyst, several factors (TiO2 particle size, TiO2 film thickness and transparency, adhesiveness between quartz and photocatalyst, etc.) need to be concerned additionally. Nevertheless, the application of IPL treatment combined with TiO2 photocatalyst offers a potential of effective non-thermal decontamination method for dealing with powder foods in food industry.

Subcritical water extraction (SWE) is an eco-friendly new extraction technology because it does not contain harmful organic solvent and has high extraction efficiency in a short time compared with conventional extraction methods. Blueberries (Vaccinium corymbosum) are widely known as superfood due to rich source of anthocyanin (malvidin-3-o-galgctoside) and antioxidant activity. In this study, optimal extraction condition of SWE from blueberries was determined and compared with the conventional extraction methods. SWE was carried out using a Dionex Accelerated Solvent Extractor (ASE, Model 350) under conditions of temperatures (110, 130, 150 and 170°C) and times (1, 3, 5 and 10 min). Total anthocyanin of SWE extracts was compared with hot water (60°C, 1 h) extract and pressed juice extract. The total anthocyanin content was determined by pH differential method. Considering both the extraction time and temperature conditions, the highest content of total anthocyanin content was 0.455 mg/g FW Vaccinium corymbosum at 130°C for 3 min. At high temperature and long extraction time, the anthocyanin in the blueberries will undergo thermal degradation due to low stability of anthocyanin at extreme condition. Besides, maximum yield of anthocyanin from blueberries using SWE was about 1.2 and 3.8 times more higher than hot water extract and pressed juice extract, respectively. Therefore, SWE is faster and more efficient method to extract anthocyanin from blueberries than conventional extraction methods. This study shows a possibility of SWE applied to food processing industry.

Oats (Avena satica L.) are an important source of dietary fiber mainly composed of β-glucans, which is reported to be effective in lowering of cholesterol and decreasing the risk of heart attack. Subcritical water extraction (SWE) is a new and promising method for the extraction of β-glucan due to its polarity-selectivity, efficiency of recovery, time-efficiency, and lower cost. In this study, efficiencies of the SWE were investigated for the extraction of β-glucan from oat flour. The conditions for maximizing the extraction efficiency were determined by varying temperature (110-190°C), pH of solvent (pH 3.0-10.6), static time (5-20 min) and particle size of oat flour. The amount of β-glucan was determined with a ‘Mixed-linkage β-glucan’ assay kit (Megazyme International Ltd.), according to McCleary and Codd (1991). The overall results showed that the concentration of β-glucan was highest under the following conditions: extraction temperature of 200°C, pH value of 4.0, static time of 10 min, and particle size of 425-850 μm. The extraction yield under the optimum condition was 6.98±1.17 g/100 g oat flour, which was over two-fold higher than that obtained using hot water extraction method (60°C, 3 h). Therefore, SWE is a feasible alternative for extracting soluble dietary fiber (β-glucan) from oat flour.