Since rice is the main food in Korea, there are no regulations on corn milling yet. Corn is known as one of the world's top three food crops along with wheat and rice, and it is known that 3.5 billion people worldwide use corn for food. In addition, corn mills are not developed or sold in Korea, but the use of corn mills is increasing significantly in many countries in Southeast Asia. In the Philippines, as Korea's rice mill import increases, Korea's KAMICO (Korea Agricultural Machinery Industry Cooperative) and domestic company A agreed to develop a corn mill jointly with PHilMech, an organization affiliated with the Philippine Ministry of Agriculture. However, research on corn milling was very insignificant, so the development was carried out based on the technology of Korea's rice mill. Rice milling is performed by peeling off the skin of rice and producing brown or white rice, so it is carried out by removing the skin and cutting the skin. On the other hand, in the corn mill, the skin of the corn is peeled, pulverized and selected to produce main products suitable for edible use. Therefore, in order to develop a corn mill, processes such as peeling, transfer, grinding, sorting, and by-product separation are required, and suitable parts must be developed. In addition, the performance must be gradually improved through experiments in which corn is repeatedly milled. The Philippines produces 7.98 million tons/year of corn, which is about 100 times that of Korea, and is mostly consumed as a staple food. This is about 10% of the total crop production in the Philippines. In addition, the main cultivation complexes of corn are the mountainous regions of Tarlac or Pangasinan, and the produced corn is 72.4% of the so-called yellow corn called Arabel and Sarangani, and the remaining 27.6% are known as white corn. In this study, it was intended to produce grains of 2.5 mm or less suitable for food for yellow corn and to develop a corn mill for 200 kg per hour. Detailed conditions for development are stipulated as more than 55% of the main product recovery rate, more than 31% of the by-product recovery rate, less than 5% of the raw material loss rate, and more than 80% of the embryo dislocation rate. In this study, to achieve this, the overall process of the corn mill was developed, and the optimal conditions for the corn mill were obtained through the development of parts and empirical tests to improve performance. In addition, it was intended to achieve the development goal by evaluating and analyzing the performance of each part so that it did not conflict.

In this study, we investigate the effect of Al/N source ratios and growth rates on the growth and structural properties of AlN films on c-plane sapphires by plasma-assisted molecular beam epitaxy. Both growth rates and Al/N ratios affect crystal qualities of AlN films. The full width at half maximum (FWHM) values of (1015) X-ray rocking curves (XRCs) change from 0.22 to 0.31° with changing of the Al/N ratios, but the curves of (0002) XRCs change from 0.04 to 0.45° with changing of the Al/N ratios. This means that structural deformation due to dislocations is slightly affected by the Al/N ratio in the (1015) XRCs but affected strongly for the (0002) XRCs. From the viewpoint of growth rate, the AlN films with high growth rate (HGR) show better crystal quality than the low growth rate (LGR) films overall, as shown by the FWHM values of the (0002) and (1015) XRCs. Based on cross-sectional transmission electron microscope observation, the HGR sample with an Al/N ratio of 3.1 shows more edge dislocations than there are screw and mixed dislocations in the LGR sample with Al/N ratio of 3.5.

This study was carried out to confirm the predatory and developmental features of N. stenoferus. We determine the host range of N. stenoferus. As a result, it was confirmed that Aphis gssypii, Myzus persicae, Planococcus citri, and Frankliniella occidentalis. N. stenoferus is thought to be able to feed on other micro pests. The test for a developmental period of N. stenoferus at 25℃ showed that the egg period was about 10 days. The nymphal period was about 18 days. Each nymphal period from 1st instar to 3rd instar nymphs was about 3 days. And the nymphal period of 4th and 5th were about 3.5 and 6 days, respectively. The female adult laid eggs in stem tissue or on leaves, and sometimes on the soaked cotton for water supply.

This study was carried out to confirm the parasitic and developmental features of A. japonica and D. suzkii was used as a parasitic natural enemy. A. japonica attacked the D. suzukii larvae and the emergence of adults were observed from D. suzukii pupae. Black spots were observed in parasitized D. suzukii larvae. Mortality of parasitized larvae, rate of parasitic and developmental feature were investigated according to developmental stages of host, D. suzukii. Mortality and rate of parasitic of D. suzukii larvae were the highest when second instar larvae were attacked. Developmental period of parasitized D. suzukii larvae showed differences to developmental stages, but there was no significant difference in developmental stage of pupal period.

Inventory inspection is an important task to eliminate the inconsistency between real assets and inventory management systems, and it is performed periodically at the site. In the case of a large-sized property, it is mainly managed in an outdoor workshop or a warehouse. However, due to the large area of the outdoor area, it is relatively difficult to identify the quantity and location of the property and is also vulnerable to theft. To solve this problem, we proposed a method and system for performing a warehouse inventory inspection using an unmanned aerial vehicle (UAV) and Bluetooth low energy (BLE) beacons. The proposed method has the following advantages. First of all, if we carry out inventory inspection by utilizing UAV, we can minimize user’s effort compared to existing methods. The method of recognizing the asset by attaching the BLE beacon is more costly than using the existing RFID technology, but it is advantageous because the recognition distance is increased and the battery life of the tag is drastically increased. We also designed a BLE beacon reader for the system and implemented a prototype to show the feasibility of the proposed system. The prototype is based on Genuino 101, which is a kind of arduino, and adds HM-10 and Neo-6m modules to provide Bluetooth and GPS functions. The BLE beacon reader was tested in outdoor, and attached in drone. We also developed an inventory checking system based on the web to display results of inventory checking. The proposed approach enables the users to automate the operation of inventory checking on an outdoor warehouse.

구조물의 최적설계에 대한 일반적인 개념이 제시되며 Gradient Projection법과 설계민감도 해석을 사용한 최 적 화 알고리즘이 논의된다. 6충 평면 철 골 구조물 의 최소무게 설 계의 예 를 통해 이 알고리즘의 적용올 예시 한다. 시스댐 전 체의 비용분석뿐만 아니라 임계 비용 및 설계민 감도 해석파 같은 이 알고리즘의 장점에 관하 여 설명한다3