Soft magnetic powder materials are used throughout industries such as motors and power converters. When manufacturing Fe-based soft magnetic composites, the size and shape of the soft magnetic powder and the microstructure in the powder are closely related to the magnetic properties. In this study, Fe-Si-Al-P alloy powders were manufactured using various manufacturing process parameter sets, and the process parameters of the vacuum induction melt gas atomization process were set as melt temperature, atomization gas pressure, and gas flow rate. Process variable data that records are converted into 6 types of data for each powder recovery section. Process variable data that recorded minute changes were converted into 6 types of data and used as input variables. As output variables, a total of 6 types were designated by measuring the particle size, flowability, apparent density, and sphericity of the manufactured powders according to the process variable conditions. The sensitivity of the input and output variables was analyzed through the Pearson correlation coefficient, and a total of 6 powder characteristics were analyzed by artificial neural network model. The prediction results were compared with the results through linear regression analysis and response surface methodology, respectively.

Smart factories can be defined as intelligent factories that produce products through IoT-based data. In order to build and operate a smart factory, various new technologies such as CPS, IoT, Big Data, and AI are to be introduced and utilized, while the implementation of a MES system that accurately and quickly collects equipment data and production performance is as important as those new technologies. First of all, it is very essential to build a smart factory appropriate to the current status of the company. In this study, what are the essential prerequisite factors for successfully implementing a smart factory was investigated. A case study has been carried out to illustrate the effect of implementing ERP and MES, and to examine the extensibilities into a smart factory. ERP and MES as an integrated manufacturing information system do not imply a smart factory, however, it has been confirmed that ERP and MES are necessary conditions among many factors for developing into a smart factory. Therefore, the stepwise implementation of intelligent MES through the expansion of MES function was suggested. An intelligent MES that is capable of making various decisions has been investigated as a prototyping system by applying data mining techniques and big data analysis. In the end, in order for small and medium enterprises to implement a low-cost, high-efficiency smart factory, the level and goal of the smart factory must be clearly defined, and the transition to ERP and MES-based intelligent factories could be a potential alternative.

Recently domestic manufacturing companies have been experiencing worsening profitability and stunted growth due to the long-term economic recession and the rapid rise of developing countries such as China and Southeast Asia. These difficulties force many companies to concentrate their core competencies on new value creation and innovation in order to gain momentum for new growth. Enterprise Resource Planning (ERP) has been considered as one of viable solutions. Among the various modules in ERP, shop floor control function in the production management module is rather limited. In order to overcome this problem, Manufacturing Execution System (MES) has been used as a subsystem which has a strong information gathering power and flexibility. Both systems interact closely with each other. In particular, ERP requires fast, accurate shop floor information at MES. This paper describes how to synchronize relevant information between ERP and MES with theory of constraints (TOC). The processing time information transmitted from the MES workplace is received at the ERP workplace. In the process, the received processing time is causing information distortion in ERP, when the information gathering standard of MES is different from the ERP information interpretation standard. The Drum-Buffer-Rope theory of TOC was applied to resolve this problem, therefore, information synchronization between both systems was made. As a precondition, the standard time of the upper ERP system was rearranged according to the capacity constraints resource. As a result, standard time restructuring has affected changes in labor costs. Standard labor costs have come close to actual ones, and information synchronization of MES transmission data has improved the reliability of standard product costs, such that it enabled various company-wide restructuring actions to be much more effective.

Commercial polystyrene-based ion exchange membranes have simple manufacturing processes, they also possess the poor durability due to their brittleness. Poly(ethylene glycol)methyl ether methacrylate with hydrophilic side chain of poly(ethylene glycol) (PEG) was used as a co-monomer to make the membranes have improved flexibility. Hydrophilicity of the anion exchange membrane was able to be adjusted by varying the chain lengths of the PEG polymers. For the preparation of the anion exchange membranes, a porous PE substrate was immersed into monomer solutions and thermally polymerized and crosslinked. The prepared membranes were then subsequently post-aminated using trimethylamine(TMA). The prepared pore-filled anion exchange membranes were evaluated in terms of ion exchange capacity(IEC), electric resistance(ER) and water uptake.

Commercial polystyrene-based ion exchange membranes have simple manufacturing processes, they also possess the poor durability due to their brittleness. Poly(ethylene glycol)methyl ether methacrylate with hydrophilic side chain of poly(ethylene glycol) (PEG) was used as a co-monomer to make the membranes have improved flexibility. Hydrophilicity of the anion exchange membrane was able to be adjusted by varying the chain lengths of the PEG polymers. For the preparation of the anion exchange membranes, a porous PE substrate was immersed into monomer solutions and thermally polymerized and crosslinked. The prepared membranes were then subsequently post-aminated using trimethylamine (TMA). The prepared pore-filled anion exchange membranes were evaluated in terms of ion exchange capacity (IEC), electric resistance (ER) and water uptake.

While commercial polystyrene-based ion exchange membranes have simple manufacturing processes, they also possess the poor durability due to their brittleness. Poly(ethylene glycol)methyl ether methacrylate with hydrophilic side chain of poly(ethylene glycol) (PEG) was used as a co-monomer to make the membranes have improved flexibility. Hydrophilicity/hydrophobicity of the anion exchange membrane was able to be adjusted by varying the chain lengths of the PEG. For the preparation of the anion exchange membranes, a porous PE substrate was immersed into monomer solutions and thermally polymerized. The prepared membranes were then subsequently post-aminated using trimethylamine. The prepared pore-filled anion exchange membranes were evaluated in terms of ion exchange capacity, electric resistance and water uptake.

Maturation-promoting factor (MPF) is well-known as cell cycle regulator during oocyte maturation and fertilization. MPF activity maintains high levels and arrest the cell cycle progression until fertilization. After fertilization, Anaphase-promoting complex/cyclosome (APC/C) mediated degradation of cyclin B causes decrease of MPF activity. One of the cytostatic factor (CSF), Emi2 inhibits APC/C activity by binding to APC/C-cdc20, therefore blocks the proteolysis of cyclin B. Degradation of Emi2 requires phosphorylation by Polo-like kinase 1 (Plk1). Thus recognition and phosphorylation of Emi2 by Plk1 are essential step for meiotic cell cycle resumption. In our previous research, we found that two phosphorylated threonine regions at amino acid position 152 and 176 in Emi2 are respectively contributed for recognition by polo-box domain of Plk1. Peptidomimetics 103-8 can block the interaction between Plk1-PBD and Emi2, and therefore meiotic maturation and meiosis resumption via parthenogenetic activation were impaired. However, major drawback of 103-8 was the limitation of penetration through the cell membrane. We synthesized the new peptidomimetics and checked bioavailability in mammalian oocyte by injection and media treatment. Medium treatment with peptidomimetics C-4, meiotic maturation has significantly decreased and meiotic resumption via parthenogenetic activation has perfectly impaired. For the next experiment, we are preparing X-ray crystallography to identify the binding modes between Plk1-PBD and peptidomimetics C-4.

Heavy metals have been analyzed on the non-woven from the 24 kinds of wet wipes and 8 kinds of mask packs. The following materials used in the non-woven according to each product are: rayon+polyester for the 12 wet wipe products, rayon+PET for the 5 wet wipe products, and rayon, cotton, rayon+polyester+cotton, pulp+polypropylene for the rest of the wet wipe products. No further information on the materials was found on the 3 wet wipes and 8 mask packs. However, polyester may be applied for the non-woven in wet wipes, because PET is part of the polyester group. The heavy metals analysis in the 24 kinds of wet wipes and 8 kinds of mask packs revealed the following: arsenic was found from 47.14±1.13 to 71.75±1.64 ㎍/L on the 3 products, the amount of nickel in the 2 products were 261.26±5.14 and 1,242.63±43.71 ㎍ /L, 53.69±1.45 and 103.52±2.02 ㎍/L on the 2 mask packs. It was also revealed that lead was detected from 7.23±0.32 to 55.67±1.46 ㎍/L on the 6 wet wipes, antimony was ranged from 187.86±5.24 to 19,558.35±3,537.30 ㎍/L on the 12 wet wipes, and 5.25±0.25 and 8,936±55.22 ㎍/L on the 2 mask packs. No cadmium, mercury, or thallium were detected from all the products. A high concentration of antimony might come from antimony trioxide, which was used as a catalyst when manufacturing the polyester. Therefore, it is strongly recommended that a non-woven used for cosmetic purposes should not use heavy metals as a catalyst when manufacturing, and it’s important to clarify which materials are used in non-woven.

While Korea had achieved radical growth of construction industry, it also had accumulated problems in material, human and economical loss due to its low quality of safety level. Therefore, not only enterprises but also the nation is putting in a great deal of efforts for construction safety. However, its effect is not satisfiable. This research aims for change of construction cite by introduction of professional Safety Patrol Management System(SPMS) and consideration of its necessity. To consideration of its necessity, we compared and anaylzed average numbers of indicated dangers and safety accident incidences in each construction cites and we researched changes in worker's safety sense. It will establish the suitable design standards and suggest the basic database for estimating disaster and accident ratio.

본 연구에서는 기후변화에 따른 농업생산기반의 취약성 평가를 위해 홍수 및 가뭄에 대해 대리변수를 선정하고 취약성 평가 지표를 산정하였다. 기후변화의 취약성 정의는 기후변화에 대한 시스템의 노출, 민감도, 적응 능력의 세가지 구성요소로 나타난다. 국내외 문헌조사와 기존연구결과를 토대로 홍수 및 가뭄에 대한 노출, 민감도, 적응능력 등 3가지 카테고리에 대한 대리변수를 각각 선정하였으며, 기상자료, 농업생산기반통계연보 및 각 시·도별 통계자료를 이용하여 선정된 대리변수에 대한 데이터베이스를 구축하였다. 수집된 기초 통계자료의 표준화를 위해 z-스코어 방법을 이용하였고, 이를 통해 모든 변수의 평균은 0, 표준편차는 1의 정규분포로 정규화되었으며, 왜곡도 분석 결과도 절대치 0.151에서 1.947 사이로 나타나 모든 데이터를 자연로그 변환 과정을 거치지 않고 표준화한 값을 취약성 지수로 산정하였다. 표준화된 각 대리변수의 결과로부터 향후 각 시도별 취약성 평가를 수행하고, 결측된 자료의 보완과 자료기간이 상이한 자료의 처리에 대한 연구방법을 정립하는 것이 요구된다.

본 연구에서는 낙동강 유역 오염총량관리대상지역의 수질오염물질간의 상관관계를 분석을 통해 하나의 오염 자료를 이용하여 다른 외부 오염자료의 평가에 대한 적용성을 검토하였다. 이를 위해 낙동강 유역의 수질관측 자료를 수집 정리하고 이를 이용하여 지점별 분석을 거쳐 관측지점을 군집화와 수질오염물질간 의 상관관계를 분석하였다. 낙동강유역환경청에서 제공하는 수질관측지점별 pH, DO, BOD, COD, SS, TN, TP의 1989년부터 2009년까지의 월별 자료를 수집하여 정리하였으며 안동1, 안동2, 예천, 상주 등 12개 지점의 월별 BOD 측정 자료를 이용하여 오염측정지점 간에 상관분석을 실시하였고 군집분석을 수 행한 결과 1군은 안동1, 안동2, 예천, 2군은 상주, 상주2, 상주3, 고령, 현풍, 합천, 남지, 3군은 구미와 달성으로 분류되었다. 수질오염물질간 상관분석에서는 오염총량관리대상지역으로 지정되는 구미 지점과 남지 지점에 대해 수질항목별 비강우시와 초기강우시 그리고 이틀간 10 mm이상의 강우시로 구분하여 상 관관계를 분석하였다. 그 결과 비강우시와 초기강우시에 두 지점에서 일관성 있는 상관관계를 나타낸 항 목은 없었으나 이틀간 강우량이 10 mm이상의 강우시에 구미 지점에서 COD-SS와 COD-TP에서 각각 0.735, 0.563로 높은 상관관계가 있었으며 남지 지점에서도 COD-SS와 COD-TP에서 0.888, 0.788로 높 은 상관관계를 나타내 낙동강 유역에서의 수질항목별 상관관계에서 앞서 연구된 새만금 하구 담수호로 유 입되는 하천수의 수질항목별 상관관계 분석과 유사한 경향을 보였다.

원자력발전소 사고시 방사성물질이 발전소외 지역으로 유출될 경우 주민을 안전하게 보호하기 위한 조치의 일환으로 주민소개가 고려된다. 소개시간 산정에 필요한 인자를 도출하고, 각각의 인자에 대해 원전 주변의 현장자료를 토대로 부지주변의 교통환경 여건을 반영하여 울진원전의 방사선비상계획구역 내의 주민전체를 소개시키는데 소요되는 시간을 예측하였다. 평상교통, 여름철 첨두교통, 그리고 겨울철 첨두교통에 대해 각각 주간 및 야간, 평상기상 및 악기상의 경우로 나누어 12가지의 주민소개 시나리오를 설정하였다. 비상계획구역 경계 남단과 북단에서 모든 소개차량(인구)이 비상계획구역을 벗어나는 데 걸리는 시간은 전체적으로는 분 정도로 예측되었다. 소개시간은 밤이 낮보다 약 45분 정도 더 소요되는 것으로 예측되었다.

The purpose of this study is identify chemical changes in yield components of soil using organic fertilizer for cultivating rice and establish reasonable methods of fertilization. In chemical change, comparing the control plot, the soil using organic fertilizer consistently for three years for cultivating rice showed an increase in pH and available phosphate in the experiment plots provided by the organic fertilizer, increase in spikelet number and 1000 grain weight in terms of yield components, and increase in yield in the three-year experiment plots. As for the quality of brown rice, the rate of head rice showed no difference when compared to that of the control plots. As for protein content, it was difficult to identify a statistical significance between the control plots and the experiment plots in 2009, but since 2010, the protein content of the experiment plots has been lower than that of the control plot, indicating that fertilization of organic fertilizer was effective in terms of rice quality. In conclusion, long-term use of organic fertilizer improved the chemical properties of soil and increased yield when compared to practical fertilization. Reasonable fertilization was identified to fertilize the nitrogen component of organic fertilizer to be a level of 12kg/10a.