수출입 묘목류에 있어서 깍지벌레류는 주요한 해충으로 다양한 묘목류에서 검출되고 있다. 깍지벌레류 중 우리나라의 소나무에 피해를 주고 있는 소나무굴깍지벌레는 연 2회 발생하는 해충으로 1세대는 4월, 2세대는 8월에 발생하여 소나무 잎에 피해를 준다. 따라서 본 연구에서는 수출입 묘목류에서 검출되는 깍지벌레류의 소독효과에 대한 정보를 제공하기 위하여 포스핀과 에틸포메이트 그리고 메틸브로마이드를 이용하여 소나무굴깍지벌레를 대상으로 훈증효과를 검정하였다. 포스핀을 소나무굴깍지벌레 알을 대상으로 0.06 mg/L 이상 처리시 난부화억제율은 100%였으며, 에틸포메이트 처리의 경우 성충은 2.6 mg/L, 알은 7.4 mg/L에서 100% 살충활성을 보였다. 그리고 메틸브로마이드를 40 g/㎥으로 2시간 훈증처리시 소나무굴깍지벌레 성충은 100% 치사하였으며, 알의 경우 26.0 mg/L을 처리했을 때 100%부화억제 효과를 보였다.

The purpose of this study is to improve practical skill evaluation method of mushroom - trained certified technician's practical skill evaluation which is one of national qualification tests based on national incompetency standards. One of the current National Competency Standards (NCS), mushroom - trained certified technician uses NCS based practical assessment method. In order to improve the current practical evaluation method, we try to improve practical evaluation method based on field customized problem solving ability and improve the practical evaluation method, various evaluation methods should be constructed. On the purpose of identify the diversity and problems of the evaluation method, the experts of the group consultation, the mushroom-related research institute and the related industry collaborated to identify the problems of the actual mushroom - trained certified technician practicum test, This study on the evaluation improvement method was carried out. In this study, the contents of practical test of the current mushroom traits were analyzed and the trends of the latest mushroom industry were widely reflected.

A black nickel oxide powder, one of the commercial nickel oxide ores, was reduced by hydrogen gas in a batchtype fluidized-bed reactor in a temperature range of 350 to 500 oC and in a residence time range of 5 to 120 min. The hydrogen reduction behavior of the black nickel oxide was found to be somewhat different from that of green nickel oxide ore. For the black nickel oxide, the maximum temperature (below which nickel oxide particles can be reduced without any agglomeration) was significantly lower than that observed for the green nickel oxide. In addition, the best curve fittings of the Avrami model were obtained at higher values of the overall rate constant “k” and at lower values of the exponent “m”, compared to those values for the green nickel oxide. It may be inferred from these results that the hydrogen reduction rate of the black nickel oxide is faster than that of the green nickel oxide in the early stages, but the situation reverses in the later stages. For the black nickel oxide ore, in spite of the low temperature sintering, it was possible to achieve a high degree fluidized-bed reduction at lower temperatures and at lower gas consumption rates than was possible for the green nickel oxide. In this regard, the use of black nickel oxide is expected to yield a benefit if its ore price is sufficiently lower than that of the green nickel oxide.

The present study prepared molybdenum trioxide (MoO3), the most important intermediate of molybdenum metal, by using a fluidized bed reactor for the thermal decomposition of ammonium molybdate (AM) in the presence of an air flow. During the process of fluidizing the sample inside the reactor, the reaction time and temperature were optimized with a close analysis of the X-ray diffraction (XRD) data and with thermogravimetric analysis (TGA). In particular, the temperature level, at which the AM decomposition is completed, is very important as a primary operating parameter. The analysis of the XRD and TGA data showed that the AM decomposition is almost completed at ~350 oC with a reaction time of 30 min. A shorter reaction time of 10 min. required a higher reaction temperature of ~500 oC with the same air flow rate to complete the AM decomposition. A sharp rise in the decomposition efficiency at a temperature ranging between 320 and 350 oC indicated a threshold for the AM decomposition. The operating conditions determined in this study can be used for future scale-ups of the process.

The use of bee venom (Apis mellifera L., BV) occasionally causes side effects such as inflammation and allergic reactions in the recipients. Several case reports also suggested the treatment of BV has some limitations in its clinical uses, due to the occurrence of dermal necrosis and anaphylatic reactions. It is generally understood that bee venom allergy is mainly the result of its allergic component, phospholipase A2 (PLA2). The present study was aimed to generate PLA2-free bee venom (PBV) and evaluate its efficacy as skin care and cosmetic preparation, comparing with original bee venom (BV). Our results showed that both BV and PBV exhibited significant protective effects in UVB-irradiated human keratinocyte (HaCaT) and human dermal fibroblast (HDF) cells and they also induced type I collagen synthesis in UVB-irradiated HDF cells except BV at 3 μg/ml. Furthermore, BV and PBV showed the inhibition of UVB-stimulated matrix metalloproteinase-1 (MMP-1), a major collagen degrading enzyme in skin. However, BV, unlike PBV, exhibited strong cytotoxicities in skin cells (both HaCaT and HDF) at its working concentrations of anti-wrinkle effect. The underlying cell signaling mechanisms of anti-wrinkle effects of BV and PBV were demonstrated by the activation of ERK1/2, and p38. Conclusively, PBV appears to be the bee venom of choice with less cytotoxicity and higher efficacy on UVB-irradiated skin cells in comparison with original bee venom (BV). Therefore, PBV can better be used as a cosmetic ingredient exhibiting excellent anti-wrinkle effect against photoaging than original BV.

Highly Activated Calcium(below HAC) is the oxidized calcium made by dissolving shell materials with high voltage, about 15,000V, and high temperature(1,500~5,000). This HAC is a material with a very high degree of purity without toxicant. This HAC decreases chemical reaction so the degree of being active and dissolving living material is outstanding. The effects of HAC on the propagation of mushrooms are following. In the case of the Pleurotus ostreatus, when controlling media moisture by mixing with the HAC, mycelium cultivating days were shortened by 2days. The day required for primordial formation after inoculation(DPI) were one day faster, The number of stem was 15 and individual weight was 248g/850cc, a 6.5% increase. In the case of Pleurotus eryngii, when controlling media moisture by mixing with the highly activated calcium, mycelium cultivating days were shortened by 3days. DPI were 1 day faster, The day required for colonization after inoculation was shortened by 6days and individual weight was 108.8g/850cc, a 9.7% increase. In the case of Flammulina velutipes, the highly activated calcium was the best for scraping up mycelium. Mycelium incubating days were shortened by 2days. DPI were shortened by 3days. The day required for colonization after inoculation was 1day faster and the period of cultivation was shortened by 3days. Individual weight was 165g/850cc, a 6.7% increase. In the case of Lentinus edodes, when mixing medial with the highly cultivated calcium, cultivating days were shortened by 3days. The days for becoming brown in color were 2 days faster and the days of the first harvest were shortened by 4days. The weight of mushrooms was 169g/2kg, a 9.7% increase.

A 67-year-old man presented with painful whitish mucosal rashes on the left side of his palate at initial presentation, and subsequently, multiple, grouped erythematous vesicular eruptions developed on the left side of his face (V2-V3 distribution). In this case, the distribution pattern of oral lesions were atypical of herpes zoster infection. Attention should be paid to the possibility that such symptoms could be early signs of herpes zoster infection.

For QTL analysis of agronomic traits based on cultivation of low and high altitude locations, BC1 F5 181 lines were developed from a cross of Tongil type Gayabyeo and japonica Chhomrong originated from Nepal. Plant materials were grown in both of low altitude area of Milyang, Korea and high altitude area of Khumaltar, Nepal. In QTLs analysis, a total of 42 QTLs were detected in days to flowering, culm length, panicle length, number of panicles/hill, panicle exertion, and spikelet ripening ratio. Although many of the QTLs were coincided between the two locations of Korea and Nepal, several QTLs were revealed as location specific in high altitude area of Khumaltar. Especially, the regions harboring marker RM489-RM14281 on chromo- some 3, RM5642-RM19049 on chromosome 5, and RM2854-RM6696 on chromosome 12 where QTLs were clustered and coincided between the two locations are considered as positive target regions for environmental independent traits. Furthermore, high rate of location specific QTLs such as panicle exertion and spikelet ripening ratio could be considered carefully for understanding the mechanism of cold tolerance based on cultivation of different altitude location.