Since rice is the main food in Korea, there are no regulations on corn milling yet. Corn is known as one of the world's top three food crops along with wheat and rice, and it is known that 3.5 billion people worldwide use corn for food. In addition, corn mills are not developed or sold in Korea, but the use of corn mills is increasing significantly in many countries in Southeast Asia. In the Philippines, as Korea's rice mill import increases, Korea's KAMICO (Korea Agricultural Machinery Industry Cooperative) and domestic company A agreed to develop a corn mill jointly with PHilMech, an organization affiliated with the Philippine Ministry of Agriculture. However, research on corn milling was very insignificant, so the development was carried out based on the technology of Korea's rice mill. Rice milling is performed by peeling off the skin of rice and producing brown or white rice, so it is carried out by removing the skin and cutting the skin. On the other hand, in the corn mill, the skin of the corn is peeled, pulverized and selected to produce main products suitable for edible use. Therefore, in order to develop a corn mill, processes such as peeling, transfer, grinding, sorting, and by-product separation are required, and suitable parts must be developed. In addition, the performance must be gradually improved through experiments in which corn is repeatedly milled. The Philippines produces 7.98 million tons/year of corn, which is about 100 times that of Korea, and is mostly consumed as a staple food. This is about 10% of the total crop production in the Philippines. In addition, the main cultivation complexes of corn are the mountainous regions of Tarlac or Pangasinan, and the produced corn is 72.4% of the so-called yellow corn called Arabel and Sarangani, and the remaining 27.6% are known as white corn. In this study, it was intended to produce grains of 2.5 mm or less suitable for food for yellow corn and to develop a corn mill for 200 kg per hour. Detailed conditions for development are stipulated as more than 55% of the main product recovery rate, more than 31% of the by-product recovery rate, less than 5% of the raw material loss rate, and more than 80% of the embryo dislocation rate. In this study, to achieve this, the overall process of the corn mill was developed, and the optimal conditions for the corn mill were obtained through the development of parts and empirical tests to improve performance. In addition, it was intended to achieve the development goal by evaluating and analyzing the performance of each part so that it did not conflict.

국내 유입 가능성이 높은 검역 관리해충인 Spodoptera eridania 및 S. ornithogalli는 전 세계적으로 토마토, 콩 등 여러 종의 작물을 가해하는 광식성 해충이다. 이에 따라 국내 유입 시 해당 작물에 높은 경제적 피해를 입힐 가능성 이 있으므로 신속 정확한 진단이 필요한 실정이다. 따라서 본 연구에서는 상기 두 종을 대상으로 현장 활용이 가능한 LAMP 진단법 개발을 수행하였다. 표적종 두 종 및 비표적종 11종(국내 발생 Spodoptera 종 및 동일 기주 가해종 등)의 전장유전체 정보를 확보한 후 비교 분석을 통해 각 표적종 별 특이적 영역을 확보한 후 해당 영역을 대상으로 LAMP 프라이머를 제작하였다. DNA 농도 10 ng/μL, 반응시간 40분을 기준으로 LAMP 진단을 수행한 결과, Spodoptera eridania는 5개의 LAMP 진단 마커를 개발하였고, S. ornithogalli는 3개의 LAMP 진단 마커를 개발하였다.

The objective of this study was to verify the effect of pig slurry application with acidification and biochar on feed value, nitrogen use efficiency (NUE) of maize forage, and ammonia (NH3) emission. The four treatments were applied: 1) non-pig slurry (only water as a control, C), 2) only pig slurry application (P), 3) acidified pig slurry application (AP), 4) acidified pig slurry application with biochar (APB). The pig slurry and biochar were applied at a rate of 150 kg N ha-1 and 300 kg ha-1, respectively. The AP and APB treatments enhanced all feed values compared to C and P treatments. The NUE for plant N was significantly increased 92.1% by AP and APB treatment, respectively, compared to the P treatment. On the other hand, feed values were not significantly different between AP and APB treatments. The acidification treatment with/without biochar significantly mitigated NH3 emission compared to the P treatment. The cumulative NH3 emission throughout the period of measurement decreased by 71.4% and 74.8% in the AP and APB treatments. Also, APB treatment reduced ammonia emission by 11.9% compared to AP treatment. The present study clearly showed that acidification and biochar can reduce ammonia emission from pig slurry application, and pig slurry application with acidification and biochar exhibited potential effects in feed value, NUE, and reducing N losses from pig slurry application through reduction of NH3 emission.

The objective of this study was to prove the effect of pig slurry application with charcoal on nitrogen use efficiency (NUE), feed value and ammonia (NH3) emission from maize forage. The four treatments were applied: 1) non-pig slurry (only water as a control), 2) only pig slurry application (PS), 3) pig slurry application with large particle charcoal (LC), 4) pig slurry application with small particle charcoal (SC). The pig slurry was applied at a rate of 150 kg N ha-1, and the charcoal was applied at a rate of 300 kg ha-1 regardless of the size. To determine the feed value of maize, crude protein, dry matter intake, digestible dry matter, total digestible nutrient, and relative feed value were investigated. All feed value was increased by charcoal treatment compared to water and PS treatment. Also, the NUE for plant N was significantly higher in charcoal treatments (LC and SC) compared to PS treatment. On the other hand, there is no significant difference for feed value and NUE between LC and SC. The NH3 emission was significantly reduced 15.2% and 27.9% by LC and SC, respectively, compared to PS. Especially, SC significantly decreased NH3 emission by 15% compared to LC. The present study clearly showed that charcoal application exhibited positive potential in nitrogen use efficiency, feed value and reducing N losses through NH3 emission.

다중 하중 과도응답해석은 시간에 따른 작용 하중에 대한 과도응답을 확인하므로 정교한 시스템 모델링 및 조밀한 시간 간격을 가 질수록 해당 시스템에 대한 동특성은 정확하게 나타내지만 이에 따른 계산 시간은 크게 증가하게 된다. 크리로프 부공간 기반 모델차 수축소법은 기계 시스템이 가지는 동적 특성과 거의 동일한 결과를 나타내면서 계산 시간을 줄일 수 있기 때문에 효율적인 과도응답 해석 방법이다. 본 연구에서는 다중 하중 및 이동 하중을 가지는 수치 예제를 통하여 크리로프 부공간 모델차수축소법 기반 과도응답 해석을 수행하고, 이를 통해 초기 시스템 및 축소차수 모델의 정확성 및 효율성을 비교하였다. 또한, 시스템 행렬 추출, 크리로프 부공 간의 기저 벡터로 구성되는 변환행렬 생성 및 축소차수모델 생성 그리고 이를 바탕으로 과도응답해석을 하는 절차를 수립하여 상용 유한요소 프로그램인 ANSYS Workbench ACT를 통해 과도응답해석 과정 자동화를 구현하여 그 효용성과 효율성을 보였다.

The production of nuclear fuel cladding tube is expected to increase with the nuclear power plant expansion. Zirconium(Zr) scrap that is generated during manufacturing is also expected to increase. Zr electrorefining experiment was carried out in the fluoride salt of LiF-KF-ZrF4 using multiple electrode for scale up and improving throughput Zr electrorefiner development. The Zr reduction peak observed at -0.8 V(vs.Ni). Polarization behavior showed that the amount of applied current increases because of decreasing cell resistance as the number of cathode increases. Experimental results showed the highest recovery rate about 98% at lowest current density of 25.64 mA/cm2 using 6 electrodes. XRD and TG analysis result show that pure Zr was recovered 99.92% and ICP analysis shows that lower impurity content than conventional impurity content of the Anode(97.8%). Electrorefining consumes energy about 7.15 kWh/kg less than 39.7% compared to the Kroll process using 6 electrode width of 20 mm and height of 65 mm. Because of increasing cell efficiency and recovery rate, using multiple cathode is determined as an efficient technique for scale up electrorefining Zr scrap.

Background : The interest in paddy-converted fields to be used as an alternative new farming area for the stable ginseng production is increasing, and made up -32% of the total ginseng cultivation area in Korea in 2014. Therefore, this study examined how soil types and fertilizer regimes influence fatty acid (FA) and vitamin E (Vit-E) variation in 6-years-old ginseng root. Methods and Results : Ginseng variety “Jagyeongjong” was cultivated upland and paddy-converted field, and three organic fertilizers were applied to both fields, at 0, 1, 2, and 4 tons per 1,000 ㎡, prior to the ginseng seedling transplantation. The 37 FAs and 8 Vit-E were analyzed with GC-FID. We observed significant variation in both FA and Vit-E contents owing to the type and quantity of organic fertilizer used in each soil type during cultivation. Unsaturated FAs were approximately 2.7-fold higher in ginseng than in saturated FAs. Linoleic, palmitic, and oleic acids were the most abundant FAs detected in ginseng roots. Additionally, α-tocopherol was the major Vit-E detected. In particular, the increased application of rice straw compost or food waste fertilizer elevated the quantity of nutritionally desirable FAs and bioactive Vit-E in ginseng root. Partial least square-discriminant analysis (PLS-DA) score plots showed that soil type might be the main cause of differences in FA and Vit-E levels in ginseng. Specifically, the PLS-DA model indicated that palmitic acid is a suitable FA marker in determining whether ginseng plants were grown in a paddy-converted field or an upland field. Moreover, linoleic acid levels were highly correlated with α-linolenic acid (r = 0.8374) according to Pearson's correlations and hierarchical clustering analysis. Conclusion : This study investigated how soil type, as well as organic fertilizer type and amount, altered the FA and Vit-E profiles in ginseng roots. Therefore, these preliminary data should be beneficial to ginseng farmers and any industries involved in the production of high quality and nutritional ginseng products.

Background : Agaricus bisporus mushroom, which originated from Europe, is an edible mushroom with a unique taste and flavor and is the most widely cultivated mushroom type worldwide, particularly because of the relatively high protein, dietary fiber, and vitamin D contents of the fruit body, which have human health benefits like anticancer and DNA damage protection. However, to our knowledge, few studies have been conducted on the ability to discriminate mushroom’s bioactive compounds according to regional production sites. Thus, this study was aimed to examine the regional difference of selected bioactive compounds in of Agaricus bisporus mushroom. Methods and Results : The cultivars (cv.) “Saedo” and “Saehan” obtained from five regions of Korea were measured their phenolics and fatty acids profiling by LC/MS and GC-FID system, respectively. Among 54 targeted phenolics, protocatechuic, p-hydroxybenzoic, caffeic, 2,4-dihydrobenzoic, p-coumaric, and salicylic acids were found in the cv. Saedo and cv. Saehan fruit body. Also, tyrosine and phenylalanine, which are precursor metabolites of phemolics, were also observed in the A. bisporus fruit body. In particular, phenylalanine and p-hydroxybenzoic acid were the most abundant phenolic precusor and metabolite present in the A. bisporus, and was significant with the production regions (p < 0.05). The FA content was significant with the production region, but not much differed (p < 0.05). The n-6 FA including linoleic acid was the major FA in the mushroom, accounting > 70% over total FA content. However, the n-3 FA was the n-6 FA was very minor FA metabolites. Conclusion : These preliminary results can extend knowledge of regional difference of certain targeted bioactive compounds in A. bisporus mushroom produced in Korea, contributing to reliable regional difference with potential broader applications for the international mushroom market.

Background : Pachyrhizus erosus (Leguminosae), locally called as “Yam bean” is a traditional medical plant that grows in the tropical and subtropical region. The root of P. erosus is used by the local people to treat insomania, treatment of osteoporosis and extracts of this plant have shown antioxidant activity, immunomodulatory activity, tyrosinase inhibitionby, antitumour properties and cardiovascular benefit. Methods and Results : Free radical scavenging activity was evaluated using α-tocopherol and butylated hydroxy toluene (BHT) as standard antioxidants. The radical scavenging activity was measured using the stable radical 1,1-diphenyl–2-picrylhydrazyl (DPPH) and ABTS assay. Total phenolic content was determined by following Folin-Ciocalteau colorimetric method and Total flavonoids were determined using aluminium chloride calorimetric methods. Phenolic compound concentration and compositions were determined by HPLC-MS/MS system. Seedlings grown under the flourescent light (Fl) exhibited the highest DPPH radical scavenging activity when compared to the plants treated with light emitting diodes (LEDs) and light emitting plasma (LEP). LED-Blue showed the higher DPPH radical scavenging activity and ABTS concentration of PE compared to other LEDs. The accumulation of phenolic compounds increased under different white-LEDs conditions as compared to LEP and FL light conditions. Conclusion : In this study, antioxidant activity and phenolic compound composition of P. erosus was improved by the application of LED and LEP.

Background : Although ginseng has various bioactive compounds in it, there is lack of study on the variations of bioactive compounds in ginseng according to the cultivation soil and the applied fertilizer types (or amount). Therefore, this study aims to examine the variations of 37 fatty acids (FA) and 8 vitamin E (Vit-E) vitamers in 6-year-old ginseng root cultivated in different soil types with different fertilizers regimes. Methods and Results : The profiling of 37 FAs and 8 Vit-E vitamers in 6-year-old ginseng roots was measured by gas chromatography coupled with a flame ionization detector, and then these results were statistically analyzed with chemometrics. The FA and Vit-E content in ginseng roots varied significantly with respect to soil cultivation conditions due to organic fertilizer types and amounts used. Unsaturated FA in ginseng is approximately 2.7 fold higher than the saturated FA. Linoleic, palmitic, and oleic acids were the most abundant FAs found in the ginseng roots. Also, the major Vit-E vitamer found in ginseng root is α-tocopherol. In particular, the application of rice straw compost or food waste fertilizer was increased to create nutritionally desirable FAs and bioactive Vit-E in ginseng root. In addition, phytonutrient profiling coupled with chemometrics can be used to discriminate the cultivation conditions of ginseng. Conclusion : This study extends our understanding about the variations of FA and Vit-E in ginseng root depending on cultivation conditions. Hence, these results can be useful as basic information for reliable ginseng production containing high amounts of phytonutrients in a paddy-converted field.

Background : The geographical origin of Panax ginseng Meyer, a valuable medicinal plant, is important to both ginseng producers and consumers in the context of economic profit and human health benefits. We therefore aimed to discriminate between the cultivation regions of ginseng using the stable isotope ratios of C, N, O, and S, which are abundant bio-elements in living organisms. Methods and Results : The C, N, O, and S stable isotope ratios were measured by isotope ratio mass spectrometer, and then these isotope ratios profiling was statistically analyzed with chemometrics. The various isotope ratios found in Panax ginseng roots were significantly influenced by region, cultivar, and the interactions between these two factors (P ≤ 0.0002). In particular, δ18O was lower in ginseng roots grown at high altitudes (r = −0.47), while δ34S was higher in ginseng roots grown close to coastal areas (r = −0.48). Chemometric results provided discrimination between the majorities of different cultivation regions. Conclusion : Our case study extends the understanding about the variation of C, N, O, and S stable isotope ratios in ginseng root depending on cultivation region. Hence, the analysis of stable isotope ratios is a suitable tool for discrimination between the regional origins of ginseng samples from Korea, with potential application to other countries.

Background : Corrosion is one of the most devastating problems faced by most industries. Mild steel has played a vital role in various fields due to the excellent mechanical properties of mild steel such as low density, high strength-to-weight ratios, good environmental stability, high thermal conductivity, and corrosion resistance. Methods and Results : The total phenolic contents (TPC) and total flavonoid contents (TFC) of the methanolic extract of C. grandiflora and R. verniciflua leaf have been examined, and its corrosion inhibition performance was investigated by weight loss and electrochemical impedance spectroscopy (EIS) and polarization measurements. The surface morphology of mild steel was analyzed by scanning electron microscopy (SEM) equipped with energy dispersive X-ray spectroscopy (EDX) and by atomic force microscopy (AFM). The percentage composition of polyphenolic compounds was found to be higher in C. grandiflora and R. verniciflua plant extracts, and it was proved to be a superior, eco-friendly, and anti-corrosive inhibitor for mild steel in 1M of H2SO4. The Tafel polarization studies indicate that the plant extract is a mixed-type inhibitor. Scanning electron microscopy/energy -dispersive X-ray spectroscopy (SEM-EDS), and atomic force microscopy (AFM) studies confirmed the formation of a protective film on the metal surface. The corrosion inhibition of the C. grandiflora and R. verniciflua plant extracts was characterized by Fourier transform infrared (FT-IR), UV-visible spectra, and wide-angle X-ray diffraction (XRD) studies; these show the strong interaction between the metal surface and the inhibitor. Conclusion : The methanolic extract was prepared the two different plants like C. grandiflora, and R. verniciflua was studied the corrosion inhibition on the mild steel specimen in acidic medium through various methods involving weight loss measurements, EIS, and potentiodynamic polarization. The results shows that the C. grandiflora, and R. verniciflua plant extracts illustrate an effective corrosion inhibitor for mild steel with good anticorrosion properties in acidic environmen

Background : Despite the presence of various bioactive compounds in ginseng, there is lack of study on the variations of bioactive compounds in ginseng according to the cultivation of soil and the applied fertilizer types (or amount). Therefore, this study aims to examine the variations of 37 fatty acids (FA) and 8 vitamin E (Vit-E) vitamers in 6-year-old ginseng root cultivated in different soil types with different fertilizers regimes. Methods and Results : The profiling of 37 FAs and 8 Vit-E vitamers in 6-year-old ginseng roots was measured by gas chromatography coupled with a flame ionization detector, and then these results were statistically analyzed with chemometrics. The FA and Vit-E content in ginseng roots varied significantly with respect to soil cultivation conditions due to organic fertilizer types and amounts used. Unsaturated FA in ginseng is approximately 2.7 fold higher than the saturated FA. Linoleic, palmitic, and oleic acids were the most abundant FAs found in the ginseng roots. Also, the major Vit-E vitamer found in ginseng root is α -tocopherol. In particular, the application of rice straw compost or food waste fertilizer was increased to create nutritionally-desirable FAs and bioactive Vit-E in ginseng root. In addition, phytonutrient profiling coupled with chemometrics can be used to discriminate the cultivation conditions of ginseng. Conclusion : This preliminary study extends our understanding about the variations of FA and Vit-E in ginseng root depending on cultivation conditions. Hence, these results can be useful as basic information for reliable ginseng production containing high amounts of phytonutrients in a paddy-converted field.