This study was conducted to evaluate capability of dyeing wastewater treatment for 3 type reactors. These reactors were Packed Bed Reactor(PBR), Fluidized Bed reactor(FBR) and Moving Media Complete Mixing Activated Sludge reactor(MMCMAS). Experiments of PBR and FBR were performed by various packing ratios and organic loading rates, experiments of MMCMAS were performed by various organic loading rates In order to obtain SBOD_5 removal efficiencies of more than 90%, the F/Mv ratios of PBR, FBR, MMCMAS were 0.11 ㎏BOD/㎏MLVSS·d, 0.12 ㎏BOD/㎏MLVSS·d, and 0.37 ㎏BOD/㎏MLVSS·d, respectively. So MMCMAS system which has more active microorganisms showed better capability of organic removal and also stronger dynamic and shock loadings than those of PBR and FBR. In PBR and FBR, the media packing ratio of 20% showed better performance of organic matters removal effciencies than 10% and 30%, but sludge production rate at media packing ratio of 30% was relatively lower than that of 10% and 20%. When more than 90% organic matters removal efficiency was obtained, the ratios of attached biomass to total biomass at PBR, FBR, MMCMAS were 89∼99%, 87∼98%, and 54∼80%, respectvely. The ratio of attached biomass to total biomass was low in MMCMAS. This was formation of thin biofilm due to shear force between rotating disc and water. The average sludge production rates(㎏VSS/㎏BODrem.) of PBR, FBR and MMCMAS were 0.20, 0.29 and 0.54, respectively.

This study was conducted to investigate the biological treatment capability of MMCMAS(Movinig Media Complete Mixing Activated Sludge) reactor for high strength organic wastewater (Average BOD=800㎎/ℓ). And this experimental results were compared previous study for low strength organic wastewater (Average BOD=150㎎/ℓ) by the same reactor. In this study, we abtained following conclusions ; (1) The laboratory MMCMAS reactor demonstrated that SBOD removal efficiencies of more than 90% can be achieved at organic loading rates of 30.9 gBOD/㎡/d for high strength organic wastewater and 39.4 gBOD/㎡/d for low strength organic wastewater, respectively. (2) The nitrification rates of MMCMAS reactor was found same results of similiar organic loading rates. (3) The ratio of attached biomass to total biomass on the moving media varied in the range of 40 to 63% and 32 to 94% for high and low strength organic wastewater, respetively. And it was varied at the various concentration of influents for the similiar organic loading rates. The sludge production rates was found approximately 0.37 gVSS/gBODrem. in MMCMAS reactor.

종자용 호밀의 탈곡시 정상 탈곡기회전속도의 기준을 설정하고자 출수후 40, 45, 50, 55, 60 일에 예취하고 예취하여 0, 1, 2, 3일간씩 포장에 깔아말린 다음 급동반경 18.6cm, 급치높이 6cm인 탈곡기로 각각 400 RPM에서 1000 RPM까지 100RPM간격으로 회전속도를 조절하며 탈곡하였으며 각 예취시기 및 탈곡직전에 종실의 수분함량을 조사하고 탈곡후 손상입률, 발아율 및 출현률을 조사하였다. 1. 호밀 종실의 수분함양은 출수후 40 일에 59.1％였고, 종실의 건물종이 최고에 달한 출수후 55일에는 36.3％였으며, 출수후 60일에는 20.1％ 로 떨어 졌다. 2. 출수후 55 일에 예취하고 1∼2일 포장에 깔아 말린 후 500∼600RPM으로 탈곡하였을 때 손상립률 10% 이하, 발아율 90% 이상, 출현율 80% 이상인 충실한 종실을 얻을 수 있었다. 3. 탈곡종실의 손상립률과 발아율은 종실의 수분함량과 높은 상관이 있었다. 4. 탈곡기의 탈곡력은 급동의 회전속도의 제곱에 비례하고, 또 급동반경에 비례하므로 회전속도의 기준은 급동반경을 고려하여 설정함이 타당한 것으로 판단되었다.