This paper describes study of the converter topologies for a low-cost, high-efficiency switched reluctance motor(hereafter abbreviated as SRM) drive. The considered converter employs two-switch split AC supply configuration. The converter preserves a single switch per phase as well as a single phase-leg rectifier circuit realizing the fewest component count to achieve a highly cost effective solution for two-phase SRM drive. Comparative study between the considered converter and other converters are provided. Analysis of the modes of operation and mathematical modeling are also provided. Analysis and simulation results are provided to validate the converter. The considered split AC converter can be a strong candidate for low-cost applications such as power tools, fans, and small appliances where both cost and efficiency are most valued.

The Henyey-Greenstein (H-G) phase function, which is characterized by a single parameter, has been generally used to approximate the realistic dust-scattering phase function in investigating scattering properties of the interstellar dust. Draine (2003) proposed a new analytic phase function with two parameters and showed that the realistic phase function is better represented by his phase function. If the H-G and Draine's phase functions are significantly different, using the H-G phase function in radiative transfer models may lead to wrong conclusions about the dust-scattering properties. Here, we investigate whether the H-G and Draine's phase functions would indeed produce significant differences in radiative transfer calculations for two simple configurations. For the uniformly distributed dust with an illuminating star at the center, no significant difference is found. However, up to ~ 20% of difference is found when the central star is surrounded by a spherical-shell dust medium and the radiation of λ < 2000 Å is considered. It would mean that the investigation of dust-scattering properties using the H-G phase function may produce errors of up to ~ 20% depending on the geometry of dust medium and the radiation wavelength. This amount of uncertainty would be, however, unavoidable since the configurations of dust density and radiation sources are only approximately available.

This study is focused on the channel design of bipolar plate in the electrode of hydrogen gas generator. The characteristics of hydrogen gas generation was studied in view of efficiency of hydrogen gas generation rate and a tendency of gas flow through the riv design of electrode. Since the flow rate and flow pattern of generated gas in the two phase flow system are the most crucial in determining the efficiency of hydrogen gas generator, we adopted the commercial analytical program of COMSOL MultiphysicsTM to calculate the theoretical flow rate of hydrogen gas from the outlet of gas generator and flow pattern of two phase fluid in the electrode. In this study, liquid electrolyte flows into the bipolar plate and decomposed into gas phase, two phase flow simulation is applied to measure the efficiency of hydrogen gas generation.

가스상의 체적분율과 압력강하는 기액이상류에 대한 이해와 예측에 있어서 매우 중요한 인자이다. 또한 그것들은 산업용 대용량의 열교환시스템 및 선박에 설치되는 보일러 및 냉동시스템의 설계에 있어서 필수적인 항목이다. 따라서 본 논문에서는 파이프의 모든 경사각도에서 기액이상류 가스상의 체적분율과 압력손실을 예측할 수 있는 이론적 해석 방법을 제시한다. 여기서의 이론적 해석은 2유체 층상류 모델을 기초로 하고 있다. 또한 이론적 해석결과와 기존의 실험결과와 비교한 결과에 대해서도 제시한다.

이 논문에서는 포화된 2상 지반의 동적해석에서 원역을 모형화하기 위한 새로운 무한요소를 제안하였다. 무한요소법은 무한영역 또는 반무한영역을 모형화해야 하는 공학문제에 효과적으로 적용되어 왔다. 그러나 현재까지 개발된 2상지반의 동적해석을 위한 무한요소는 형상함수에 사용될 수 있는 파동성문이 2개(Pl파와 P2파)로 한정되어 있다. 이 논문에서는 이와 같은 제한을 없애고 임의 개수의 파동성분을 고려할 수 있도록 하는 정식화 과정을 제안하였다. 구조물을 포함하는 근역은 유한요소로 나타내며 원역은 평행층상 반무한 지반으로 가정하였다. 제안된 무한요소의 타당성은 1차원 및 2차원 파동전달문제를 해석하고 이를 이론해 및 정밀수지해석 해와 비교하여 검증하였다.

This paper is for applying interactive fuzzy linear programming for the problem of product mix planning, which is one of the aggregate planning problem. We developed a modified algorithm, which has two-phase approach for interactive fuzzy linear programming to get a better solution. Adding two-phase method, we expect to obtain not only the highest membership degree, but also a better utilization of each constrained resource.

Our goal is to present a simple volume-of-fluid type interface-tracking algorithm to compressible two-phase flow in two space dimensions. The algorithm uses a uniform underlying Cartesian grid with some cells cut by the tracked interfaces into two subcells. A volume-moving procedure that consists of two basic steps: (1) the update of volume fractions in each grid cell at the end of the time step, and (2) the reconstruction of interfaces from discrete set of volume fractions, is employed to follow the dynamical behavior of the interface motion. As in the previous work with a surface-tracking procedure for general front tracking (LeVeque & Shyue 1995, 1996), a high resolution finite volume method is then applied on the resulting slightly nonuniform grid to update all the cell values, while the stability of the method is maintained by using a large time step wave propagation approach even in the presence of small cells and the use of a time step with respect to the uniform grid cells. A sample preliminary numerical result for an underwater explosion problem is shown to demonstrate the feasibility of the algorithm for practical problems.

이 논문은 지진요소 결정의 정확성과 안정성을 향상시키기 위하여 파형분석과 두 점을 잇는 파선추적을 이용한 지진요소 결정 알고리즘을 소개한다. 지진의 규모가 상대적으로 작을 때(일반적으로 m_{b}

Ll2기지에 20 vol.% Cr2Al이 석출된 Al-21Ti-23Cr 2상합금은 1150˚C에서는 2상영역에 위치하지만 1000˚C에서는 3상영역에 위치한다. 이러한 점에 착안하여 본 연구에서는 Al-21Ti-23Cr 2상합금의 시효처리시 800˚C 및 1000˚C이하에서 시효처리하여 Ll2기지에 제3상을 미세하게 석출시켜, 기계적성질을 개선하고자 하였다. Al-21Ti-23Cr 2상합금의 시효처리시 800˚C 및 1000˚C에서는 Ll2기지부분에 수 μm 크기의 제3상이 다량 석출되지만 600˚C이하에서는 제3상이 석출이 관찰되지 않았으며, 제3상의 석출형태는 1000˚C보다 800˚C에서 시효처리할 경우 더욱 미세하게 분포하는 것으로 확인되었다. 시효온도 상승에 따른 Al-21Ti-23Cr 2상합금의 항복강도는 800˚C에서 급격히 증가 후 다시 급격히 감소하는경향을 나타냈으며, 이러한 항복강도의 급격한 증가는 Ll2기지 부분에 수 μm 크기의 미세한 제3상이 다량 석출되기 때문에 나타나는 현상으로 판단된다. Al-21Ti-23Cr 2상합금의 시효처리시 Ll2기지에 석출되는 제3상은 TiAlCr으로 확인되엇으며, 이러한 TiAlCr 석출상의 이용은 Ll2기지의 균열전파에 대한 저항성를 향상시켜 합금의 기계적성질의 개선에 매우 효과적일 것으로 판단된다.

The objectives of this paper are to present data to illustrate how an advanced digestion process, two-phase digestion, can provide superior performance in terms of waste stabilization efficiency and net energy recovery. As the result, it is possible to separate enrichment cultures of acidogenic and methanogenic organisms in isolated environments by kinetic control involving manipulation of dilution rates. In single-phase digestion process, HRT and COD loading for effective operation were 14.29 days and 2.33kg $COD/m^3$ day, but two-phase digestion may be conducted efficiently at 7 days of HRT and 5.71kg $COD/m^3$ day of loading. Data from this studies showed that the two-phase process is better than single-phase digestion under all test conditions when compared on the bases of gas yield and production rate, reductions of COD and VS, buffer capacity, and unconverted volatile acids in the effluent.

Boilers and diesel engines have many problems because their exhaust particles, i.e., soot have lots of bad influence on environment. And it's spray and flame have fundamentally axial symmetric shape. To investigate the relationship between fuel concentration distribution of spray and soot concentration distribution as well as temperature distribution of flame, we made a axial symmetric two phase spray-flame and analyzed the structure of is. The measuring method is the principle of the light extinction method for the spray-flame and onion peeling model is applied to analyze the radial distribution of fuel and soot concentration. The temperature of flame is measured by ø 0.4mm Pt-Pt.RH 3% thermocouple. The oils for the experiments are diesel oil and 10% water emulsified diesel oil. It was found that the soot concentration becomes higher as it comes near to the center of flame, and the fuel concentration does, too. And the soot concentration level of diesel oil is generally higher than that of the 10% water emulsified fuel. The maximum flame temperature of diesel oil is 1,170℃, however, 10% water emulsified diesel oil is 1,270℃.

This paper is a part of the series on positron annihilation spectroscopy of two-phase diffuse gas-and-dust aggregates, such as interstellar medium and the young remnants of type II supernovae. The results obtained from prior studies were applied here to detect the relationship between the processes of the annihilation of the K-shell electrons and incident positrons, and the effects of these processes on the optical spectra of their respective atoms. Particular attention was paid to the Doppler broadening of their optical lines. The relationship between the atomic mass of the elements and the Doppler broadening, ΔλD (Å), of their emission lines as produced in these processes was established. This relationship is also illustrated for isotope sets of light elements, namely 3 6 7 7 9 10 11 2 3 3 4 4 5 5 He, Li, Li, Be, Be, B, and B. A direct correlation between the γ-line luminosity ( Eγ =1.022 MeV) and D Δλ (Å) was proved virtually. Qualitative estimates of the structure of such lines depending on the positron velocity distribution function, f(E), were made. The results are presented in tabular form and can be used to set up the objectives of further studies on active galactic nuclei and young remnants of type II supernovae.

This study was intended to estimate the axial deformation of joint between pavement modules in the rapid-constructible modular pavement system, and to investigate the applicability of two-phase composites for a joint material, which was composed of cement paste, epoxy, or polyurethane as a matrix and sand as particles.

수성 이상계는 물에 친수 성분만을 용해시킨 후 용해 물질들 사이에 유발되는 단순한 물리적 불친화성에 의해 액상 다중 층으로 분리되기 때문에 생체적합성에 대한 장점을 가지고 있다. 본 연구에서는 물에 친수 성분 만을 용해시킨 후 두 층으로 분리되는 수성 이상계 상분리 원리를 수성 다중 층 액상 화장료에 응용하여 수성 다중 층 화장료에 적용이 가능한 대표적인 두 종의 수성 이상계를 선정하였으며, 이들에 대해 바이노달 곡선과 임계점 및 농도 대응선 그리고 새로운 개념의 상분리 부피 및 상분리 시간 대응곡선을 포함하는 상도를 실험을 통해 작성하였으며, 상 도표로부터 액상 다중 층으로 분리되는 최적의 조건을 관찰할 수 있었다.