Due to the global climate change, Korean peninsula is has been experiencing flooding and drought severely. It is hard difficult to manage water resources sustainably, because due to intensive precipitation in short periods and severe drought has increased in Korea. Reused water from the wastewater treatment plant (WWTP) could be a sustainable and an alternative water source near the urban areas. In order to understand the patterns of water reuse in Korea, annual water reuses data according to the times and regional governments were investigated from 2008 to 2019. The reused water from WWTP in Korea has been mainly used for river maintenance flow and industrial use, while agricultural use of water reuse has decreased with time. Metropolitan cities in Korea such as Seoul, Busan, Daegu, Ulsan, and Incheon have been mainly used reused reusing water for river maintenance flow. Industrial water reuse has been limitedly applied recently for the planned industrial districts in Pohang, Gumi, Paju, and Asan. By using the collected annual water reuse data from the domestic sewerage statistics of sewerage, the optimistic and pessimistic future estimations of for future annual water reuse were suggested from 2020 to 2040 on a five year interval for every five years.

Scale and rust generation in water pipes is a common phenomenon when cast iron water pipes have been used for a long time. A physical water treatment device is known among various means for suppressing rust in a water pipe, and a zinc ionization device for putting zinc metal into a pipe and emitting the zinc cation into water is one of such devices. This research measured the amount of zinc ion generated, which is known to exhibit an effect of inhibiting rust and scale generation in a pipe, and examined the scale and rust inhibition effect of the ionization device installed for ground or building water supply. In the case of distilled water, the concentration of zinc ion increased by circulating water in the ionization device several times, and it was verified to be hundreds of μg/L, and in the case of discharging ground or tap water, it was verified to be tens of μg/L. In addition, a verification pipe was installed to confirm the change inside the pipe before and after installation of the zinc ionization device, and the internal condition of the pipe was observed 3 months to several years after installation. It was confirmed that the corrosion area of the surface of the pipe was no longer increased by installing a corrosion inhibitor, and if the pipe was already filled with corrosion products, the amount of corrosion products gradually decreased every year after installation. The phenomenon of fewer corrosion products could be interpreted as expanding the space in the pipe due to the corrosion product as Fe2O3 adhered to the inner surface of the pipe and turned into a smaller black Fe3O4. In addition, we found that scale such as CaCO3 together in the corrosion by-products gradually decreased with the attachment of the ionization device.

본 연구에서는 낮은 막 저항을 가지는 알칼리 수전해 시스템 적용을 위한 격리막 제조를 위하여 PPS (Polyphenylene sulfide)를 지지체로 사용하고 Polysulfone과 무기물 첨가제를 이용하여 격리막을 제조한 뒤, 지지체의 두께와 다공도에 대한 영향을 분석하였다. 지지체로 사용된 PPS 펠트를 온도(100°C, 150°C, 200°C)와 압력(1톤, 2톤, 3톤, 5톤)의 변수를 두어 압축을 진행 하여 두께를 조절하고자 하였으며, 무기입자로서 친수성이 높고 내알칼리성이 뛰어난 BaTiO3와 ZrO2를 사용하여 polysulfone과 함께 슬러리를 제조하고 압축한 PPS 펠트 위에 캐스팅하여 다공성 격리막을 제조할 수 있었다. 전자주사현미경(SEM)을 통해 압축 조건에 따른 분리막의 모폴로지 변화를 확인하고, 기공도를 계산하였으며, 압축 조건이 증가할수록 두께와 기공도가 감소하는 경향을 확인하였다. 수전해용 격리막으로서 사용이 가능한지를 확인하기 위하여 다양한 특성 평가를 진행하였다. 기계적강도를 측정한 결과 압축 조건(온도와 압력)이 증가할수록 인장강도가 점차 증가하는 경향을 확인하였다. 최종적으로 내알칼리성 테스트 를 통하여 제조한 다공성 격리막이 우수한 내알칼리성을 가지는 것을 확인하였고, I-V 테스트를 통하여 100°C와 150°C 조건에서 압축된 막들이 기존의 압축하지 않은 막보다 낮은 전압을 가지며 성능이 향상되었다는 것을 확인하였다.

This study investgates Korean water technology through the water market perspective and analyses its competitiveness. Based on the water technology classification, water technology competitiveness is analysed through the technological influence index and market dominance index which are based on the extracted water technology patents from the US, Europe, Korea, and Japan for the last decade. As a result, the Korean water technology patents were lack in influence and competitiveness in global market considering the large volume of patents. There are two most tech-influential industries in Korea; manufacturing industry consisting pipes, sterilization, disinfection, and advanced water purification equipment, and construction industry including seawater desalination and water resource development. Due to the domestic usage of the patents, the Korean water technology patents scored low in global market PFS(Patent Family Size) index compared to their CPP(Cites Per Patent) index. The study is meaningful in a way that the analysis on Korean water technology competitiveness using water technology classification system and patent analysis was conducted based on the perspective of the global water market.

본 연구에서는 polyketone (PK)을 이용하여 전기방사 조건에 따른 섬유 형상의 특성 변화와 유수분리 가능성을 확인해 보았다. 고습과 저습 조건에서는 마이크론 직경의 섬유가 형성되었으며, 특히 고습에서는 섬유의 표면이 거칠게 변한 것이 확인되었다. 섬유 직경을 micro에서 nano로 변경하기 위하여 방사용액에 염을 추가하였으며, 그 결과 섬유 직경이 약 90% 감소하는 것을 확인할 수 있었다. 제조된 rPK-LNC와 PK-H로 유수분리 특성을 확인하기 위해 oil/water 에멀션으로 중 력 조건에서 유수분리를 진행하였으며 total organic carbon (TOC)와 탁도를 측정하여 특성을 분석하였다. 제거율 확인결과 탁도가 TOC와 동일한 경향성을 나타내는 것이 확인되었다. 따라서 본 연구에서는 고분자의 방사조건과 염의 유무에 따른 분리막의 섬유 형상과 물리적 특성변화와 이를 이용한 유수분리 특성에 대해 연구하였다.

Bacillus velezensis HKB-1가 표고버섯 수확후배지 퇴비로부터 분리되었으며 고추역병균(Phythopthora capsici), 인삼모 잘록병균(Rhizoctonia solani), 고추탄저병균(Collectotrichum coccodes) 및 시들음병(Fusarium oxysporium)의 균사체 성장을 70% 이상 억제하는 항 진균 활성을 보였다. B. velezensis HKB-1은 표고버섯 수확후배지 퇴비물 추출물과 당밀 1% 첨가배지에서 다른 상업용 세균배지보다 10~100배 더 높은 세균증식률을 보였으며 고추 역병균의 균사체 생장을 90% 억제하였으며 고추생육 촉진효과 및 고추역병에 대하여 70% 이상의 방제효과가 있었다.

Since the Japanese government recently unveiled a plan to release radioactive water into the ocean, the neighbouring countries have expressed concerns. In particular, certain environmental groups claimed that the execution of this operation would have a significant impact on the marine environment in the region. In light of significant potential risks, this article argues that such an operation is likely to trigger an international dispute at an international court or tribunal for several reasons. Accordingly, this article would like to explore the highly likely international litigation. First, the background of this potential international litigation, including the reasons why the operation may end up at an international court or tribunal are addressed. Subsequently, certain legal and factual issues that are expected to be contested between the parties at the court or tribunal are discussed. Finally, this article discusses some of the expected outcomes of this likely international litigation, including reparation.