The synthesis of porous W by freeze-casting and vacuum drying is investigated. Ball-milled WO3 powders and tert-butyl alcohol were used as the starting materials. The tert-butyl alcohol slurry is frozen at –25oC and dried under vacuum at –25 and –10oC. The dried bodies are hydrogen-reduced at 800oC and sintered at 1000oC. The XRD analysis shows that WO3 is completely reduced to W without any reaction phases. SEM observations reveal that the struts and pores aligned in the tert-butyl alcohol growth direction, and the change in the powder content and drying temperature affects the pore structure. Furthermore, the struts of the porous body fabricated under vacuum are thinner than those fabricated under atmospheric pressure. This behavior is explained by the growth mechanism of tert-butyl alcohol and rearrangement of the powders during solidification. These results suggest that the pore structure of a porous body can be controlled by the powder content, drying temperature, and pressure.

Porous basalt aggregate is commonly used in roadbed engineering, but its application in concrete has rarely been studied. This paper studies the application of porous basalt in concrete. Porous basalt aggregate is assessed for its effects on mechanical strength and durability of prepared C50 concrete; because it has a hole structure, porous basalt aggregate is known for its porosity, and porous basalt aggregates can be made full of water through changing the content of saturated basalt; after full-water condition is achieved in porous basalt aggregate mixture of C50 concrete, we discuss its mechanical properties and durability. The effects of C50 concrete prepared with basalt aggregate on the compressive strength, water absorption, and electric flux of concrete specimens of different ages were studied through experiments, and the effects of different replacement rates of saturated porous basalt aggregate on the properties of concrete were also studied. The results show that porous basalt aggregate can be prepared as C50 concrete. For early saturated porous basalt aggregate concrete, its compressive strength decreases with the increase of the replacement rate of saturated aggregate; this occurs up to concrete curing at 28 d, when the replacement rate of saturated basalt aggregate is greater than or equal to 40 %. The compressive strength of concrete increases with the increase of the replacement rate of saturated aggregate. The 28 d electric flux decreases with the increase of the replacement rate of saturated aggregate, indicating that saturated porous basalt aggregate can improve the chloride ion permeability resistance of concrete in later stages.

High-performance carbon materials were prepared via a one-step molten salt carbonization of tobacco waste used as electrode materials for supercapacitors. Carbon material prepared by carbonization for 3 h in molten CaCl2 at 850 °C exhibits hierarchically porous structure and ideal capacitive behavior. In a three-electrode configuration with 1 mol L− 1 H2SO4 aqueous solution, it delivers specific capacitance of 196.5 F g− 1 at 0.2 A g− 1, energy density of 27.2 Wh kg− 1 at 0.2 A g− 1, power density of 983.5 W kg− 1 at 2 A g− 1, and excellent cyclic stability with 94% capacitance retention after 5000 charge–discharge cycles at 1 A g− 1. Moreover, in a symmetrical two-electrode configuration with 6 mol L− 1 KOH aqueous solution, it delivers specific capacitance of 111.1 F g− 1 at 0.2 A g− 1, energy density of 3.8 Wh kg− 1 at 0.2 A g− 1, and power density of 482.0 W kg− 1 at 2 A g− 1. The relationship between hierarchically porous structure and capacitive performance is also discussed.

The production of macroalgae-derived adsorbent is of great importance to realize the idea of treating pollutants with invaluable renewable materials. Herein, a novel meso-micro porous nano-activated carbon was prepared from green alga Ulava lactuca in a facile way via chemical activation with zinc chloride. The resultant activated carbon possesses a significant specific surface area 1486.3 m2/ g. The resulting activated carbon was characterized and investigated for the adsorption of Direct Red 23 (DR23) dye from an aqueous environment. Batch method was conducted to study the effects of different adsorption processes on the DR23 dye adsorption from water. Isotherms and kinetics models were investigated for the adsorption process of DR23 dye. It was found that the adsorption data were well fitted by Langmuir model showing a monolayer adsorption capacity 149.26 mg/g. Kinetic experiments revealed that the adsorptions of DR23 dye can be described with pseudo-secondorder model showing a good correlation (R2 > 0.997). The prepared activated carbon from Ulava lactuca was exposed to a total of six regeneration experiments. The regeneration result proved that the fabricated activated carbon only loses 19% of its adsorption capacity after six cycles. These results clearly demonstrated the high ability of the obtained active carbon to absorb anionic dyes from the aqueous environment.

Porous mullite-corundum ceramics were prepared using organic foam impregnation method with alumina and silica as raw materials. The influence of alkaline treatment and surfactant modification on polyurethane foam were studied. Effects of sintering process and material composition on porous mullite-corundum ceramics were investigated. The results show that the hang-pulp quantity of polyurethane foam increases with alkaline treatment. After treatment with 3 wt% SDS solution, the hang-pulp quantity of polyurethane foam further improved. Open porosity of sample decreased with elevation of sintering temperature and holding time, and compressive strength of sample showed a trend opposite to the change of porosity. The open porosity of the sample was enhanced by the increase of m(Al2O3/SiO2); the compressive strength decreased with increase of m(Al2O3/SiO2). However, when m(Al2O3/SiO2) was 2.5, the compressive strength of the sample reached 6.23 MPa, and the open porosity of the sample was 80.7 %.

In this article, nitrogen (N) doped porous carbon nanofibers (N-PCNF) were prepared by carbonization of polymer-silica nanocomposite precursor, and its application for heavy metal ion removal was demonstrated. Carbon–silica composite nanofibers were obtained by carbonization of electrospun polyacrylonitrile (PAN)-silica nanofiber composites. Subsequent selective etching of silica porogen produced porous carbon nanofibers (PCNF). It was revealed by surface characterization with X-ray photoelectron spectroscopy (XPS) that the surface of the PCNF was nitrogen-doped because N atom from cyanide group in PAN chains remained in the hexagonal carbon structure. The use of the obtained N-PCNF for heavy metal ion ( Hg2+) removal was demonstrated using a simple adsorption test apparatus and 5, 10, 15, 20-tetraphenylporphine tetrasulfonic acid (TPPS) as an indicator. The N-PCNF showed a removal efficiency of 96 and 99% in 10 and 120 min, respectively, indicating a maximum heavy metal ion adsorption capacity at pH 7.0. In addition, heavy metal ion adsorption behavior was also analyzed using common adsorption isotherms. This article provides important information for future research activities regarding control over hazardous substances.

Here, a novel nitrogen-doped carbon nano-material (N-CGNM) with hierarchically porous structure was prepared from spent coffee ground for efficient adsorption of organic dyes by a simple one-step carbonization process (the uniform mixture consists of spent coffee ground, urea, and CaCl2 with the ratio of 1:1:1, which was heated to 1000 °C with a rate of 10 °C min− 1 and held at 1000 °C for 90 min in N2 atmosphere to carry out carbonization, activation, and N-doping concurrently). The morphology and structure analysis show that the prepared N-CGNM exhibits hierarchical pore structure, high specific surface area (544 m2/ g), and large numbers of positively charged nitrogen-containing groups. This unique structure and chemical composition endow N-CGNM with an excellent adsorption capacity toward anion Congo red (623.12 ± 21.69 mg/g), which is obviously superior to that (216.47 ± 18.43 mg/g) of untreated spent coffee ground-based carbon nano-materials (CGM). Oppositely, the adsorption capacity of N-CGNM towards cation methylene blue is inferior to that of CGM due to the existence of electrostatic repulsion. These findings show a great guidance for the development of low-cost but efficient selective adsorbent.

Cost-effective and sustainable high-performance supercapacitor material was successfully prepared from cellulosic waste (Sapindus trifoliatus nut shells) biomass-derived activated carbon (CBAC) by physical activation method. The CBAC displays nanofiber morphology, high specific surface area (786 m2/ g), large pore volume (0.212 cm3 g− 1) which are evaluated using FESEM, BET and possessed excellent electrochemical behavior analyzed through various electrochemical methods. Moreover, the assembled symmetric CBAC//CBAC device exhibits high specific capacitance of 240.8 F g− 1 with current density of 0.2 A g− 1 and it is maintained to 65.6 F g− 1 at high current density of 2.0 A g− 1. In addition, the symmetric device delivers an excellent specific energy maximum of over 30 Wh kg− 1 at 400 W kg− 1 of specific power and excellent cycling stability in long term over 5000 cycles. The operation of the device was tested by light-emitting diode. Hence, CBAC-based materials pave way for developing large-scale, low-cost materials for energy storage device applications.

본 연구에서는 낮은 막 저항을 가지는 알칼리 수전해 시스템 적용을 위한 격리막 제조를 위하여 PPS (Polyphenylene sulfide)를 지지체로 사용하고 Polysulfone과 무기물 첨가제를 이용하여 격리막을 제조한 뒤, 지지체의 두께와 다공도에 대한 영향을 분석하였다. 지지체로 사용된 PPS 펠트를 온도(100°C, 150°C, 200°C)와 압력(1톤, 2톤, 3톤, 5톤)의 변수를 두어 압축을 진행 하여 두께를 조절하고자 하였으며, 무기입자로서 친수성이 높고 내알칼리성이 뛰어난 BaTiO3와 ZrO2를 사용하여 polysulfone과 함께 슬러리를 제조하고 압축한 PPS 펠트 위에 캐스팅하여 다공성 격리막을 제조할 수 있었다. 전자주사현미경(SEM)을 통해 압축 조건에 따른 분리막의 모폴로지 변화를 확인하고, 기공도를 계산하였으며, 압축 조건이 증가할수록 두께와 기공도가 감소하는 경향을 확인하였다. 수전해용 격리막으로서 사용이 가능한지를 확인하기 위하여 다양한 특성 평가를 진행하였다. 기계적강도를 측정한 결과 압축 조건(온도와 압력)이 증가할수록 인장강도가 점차 증가하는 경향을 확인하였다. 최종적으로 내알칼리성 테스트 를 통하여 제조한 다공성 격리막이 우수한 내알칼리성을 가지는 것을 확인하였고, I-V 테스트를 통하여 100°C와 150°C 조건에서 압축된 막들이 기존의 압축하지 않은 막보다 낮은 전압을 가지며 성능이 향상되었다는 것을 확인하였다.

The high level of lithium storage in synthetic porous carbons has necessitated the development of accurate models for estimating the specific capacity of carbon-based lithium-ion battery (LIB) anodes. To date, various models have been developed to estimate the storage capacity of lithium in carbonaceous materials. However, these models are complex and do not take into account the effect of porosity in their estimations. In this paper, a novel model is proposed to predict the specific capacity of porous carbon LIB anodes. For this purpose, a new factor is introduced, which is called normalized surface area. Considering this factor, the contribution of surface lithium storage can be added to the lithium stored in the bulk to have a better prediction. The novel model proposed in this study is able to estimate the lithium storage capacity of LIB anodes based on the porosity of porous carbons for the first time. Benefiting porosity value (specific surface area) makes the predictions quick, facile, and sensible for the scientists and experts designing LIBs using porous carbon anodes. The predicted capacities were compared with that of the literature reported by experimental works. The remarkable consistency of the measured and predicted capacities of the LIB anodes also confirms the validity of the approach and its reliability for further predictions.

Doped porous carbon materials have attracted great interest owing to their excellent electrochemical performance toward energy storage applications. In this report, we described the synthesis of nitrogen-doped porous carbon (N-PC) via carbonization of a triazine-based covalent organic framework (COF) synthesized by Friedel–Crafts reaction. The as-synthesized COF and N-PC were confirmed by X-ray diffraction. The N-PC exhibited many merits including high surface area (711 m2 g−1), porosity, uniform pore size, and surface wettability due to the heteroatom-containing lone pair of electron. The N-PC showed a high specific capacitance of 112 F g−1 at a current density of 1.0 A g−1 and excellent cyclic stability with 10.6% capacitance loss after 5000 cycles at a current density of 2.0 A g−1. These results revealed that the COF materials are desirable for future research on energy storage devices.