As product diversity increases and product life cycle gets shorter, lead time reduction and manufacturing cost saving of die & mold are getting important in machinery, automotive, and electronics industries. To develop a novel free-machining die & mold steel, we try to modify the chemical compositions of AISI P20 mold steel by adding boron, nitride, and sulfur. After making three types of mold steels which are base metal of AISI P20 mod., boron and nitrogen added, and boron, nitrogen, and sulfur added to the base metal. Milling tests are carried out using TiN, TiCN, and TiAlN coated WC end-mills under various cutting conditions. Boron and nitrogen added steel machined by TiN coated tool shows the most excellent tool wear and surface roughness characteristics. The results might come from BN inclusions in base metal acting as a stress concentration source and lowering strain resistance during cutting process. The relationship between tool wear and surface roughness are also discussed including feed rate effects.

Carbon fiber reinforced plastics are typical examples of carbon fiber, which retain high strength and high strength at high temperatures. Also, it is applied to various fields, such as the structure of the aircraft, automobile, and the core industries. CFRP machining methods include machining tools such as cutting machining and laser machining. In this thesis, a tool dynamometer and tool microscope were used to measure the cutting characteristics of various cutting conditions and tool wear and tool wear. As a result, the cutting force of the new shape drill (lower shape drill) was measured higher than other tools, the amount of tool wear was the lowest, and it was found that a good machined surface was obtained.

On-line detection system of the abnormal states in a machining process needs to be developed to implement the IMS(Intelligent Manufacturing System). High productivity and efficient quality control can be achieved through the on-condition maintenance for normal tool condition. Generally it is difficult to determine the exact point of time for a tool change because a tool wear grows gradually on the contrary to other abnormal states such as tool fracture, chattering etc. In this article, the shape variation of cutting force signal generated by a insert during face milling was investigated along with a tool wear. The variance, skewness and kurtosis were used as the shape parameters to describe the shape variation and, consequently, utilized as the features to monitor a tool wear. Experimental results showed that the shape parameters could discriminate the tool condition reliably between a fresh tool and a worn tool. As a result, we proposed the method to diagnose a tool wear by combining these parameters with a neural network algorithm.

As the automobile industry has recently developed, the automobile parts processing industry is also increasing. However, as the processing companies don't have their own studies or facilities now, their productivity is low. And they are in difficult situations because they cannot stay economically competitive. This study measured the cutting force, surface roughness, and tool wear of Ductile Cast Iron(FCD500) used in automobile brake modules in automobile parts to try to help harsh realities of automobile parts processing industry. And it drew the result by taking a test to increase productivity of processing companies as interrupted cutting is more used in industrial settings than continuous processing.

In this paper some physical evidences indicate that reduced friction occurs in an cryogenic machining process, in which LN2 is applied to the selected cutting zone. LN2 also reduced the tool wear rate to a great extent and elongated the tool life up to four times compared to emulsion cooling.

Increased complexity of products and their manufacturing processing demans higher quality control and monitoring than ever before. Therefore, flexible automatization or flexible manufacturing systems (FMS) offer numerous advantages over alternative manufacturing methods. In this state, a in-process monitoring is one of the important flexible automatino system. And as use of NC and CNC machine tool has been increasing, cutting work has automating and it is necessary to develop the automatic production system combined a couple of machine tool. Thus, in this paper to search examination it can measure the tool wear and the tool life and can be more practical research subject.

Increased complexity of products and their manufacturing processing demans higher quality control and monitoring than ever before. Therefore, flexible automatization or flexible manufacturing systems (FMS) offer numerous advantages over alternative manufacturing methods. In this state, a in-process monitoring is one of the important flexible automation system. And as use of NC and CNC machine tool has been increasing, cutting work has automating and it is necessary to develop the automatic production system combined a couple of machine tool. Thus, in this paper to search examination it can measure the tool wear and the tool life and can be more practical research subject.