In this paper, it is covered in detail the process of generating structural alternatives with geometry change and its optimization by StrAuto. The main roof structure of the Exhibition Center is modelled parametrically and the optimal alt is derived by observing volume changes according to geometry change of main roof truss. Existing studies performed optimization process through sections and properties due to the limitations of shape change, but this study have meaning of performing the optimization with geometry changes which is the most critical skills of StrAuto. By the process of securing a sufficient margin by geometry changes and reducing volume with the optimization of sections, despite of a partial optimization of large space structure, it could be reduced by 11.7% of the total volume.

Since the 1980s, the number of large space buildings in Korea has consistently been increasing due to large scale international competitions such as the Olympics and the World Cup, demands for environmental improvement, and development of structural systems. Due to these reasons, this paper conducted a comparative analysis on terrorism risk factors of large space structure and skyscrapers in Korea. The results suggest that the total risk level of high-rise and large space structure was "medium level risk" and that the terrorism risk level for large space structure was as high as that for high-rise buildings. As it relates to the risk levels depending on scenarios, terrorism risks to large space structure were higher than high-rise buildings in the "internal explosion" and "internal intrusion" categories. And the results of analyzing explosion-related scenarios except for CBR suggest that terrorism risks to large space structure were highest when it comes to Internal-Explosive followed by Internal-Intrusion and Explosive-Zone I; and the results showed a regular pattern. On the other hand, in the case of high-rise buildings, terrorism risks were highest in Internal-Explosive followed by Explosive-Zone I and Explosive-Zone II; and the results showed an irregular pattern.

Large enclosure means a space of high ceiling and large floor. Designing the heating system, many thermal conditions exist, such as thermal comfort, IAQ, heating load and energy efficiency etc. The prediction of the temperature distribution is carried out according to some of the diffuser angle. The simulation conditions are 7 m high diffuser, 4/2 inlet/outlet diffusers, 39 °C discharge air temperature, and 6 m/s exit velocity. The results show that 45° diffuser provides an optimal thermal environment, and the reason is that the temperature is closed to the designed temperature 22 °C at 1.18m elevation plane. As the diffuser angle is decreased, the temperature of the upper region is increased for the thermal buoyancy effect. And the asymmetry of the temperature distribution is increased.

최근 산업 발전과 더불어 대공간 건축물의 수요가 급증하고 있다. 이 분야 선진 기술은 지간 300m 이상의 대공간 건축물 실현도 가능하게 하고 있다. 대공간 구조에는 쉘구조, 스페이스 프레임 구조, 막구조, 케이블구조 등이 있다. 대공간 건축물은 기둥 없이 넓은 공간을 확보해야 하는 구조적 특성 때문에 설계초기 단계에서부터 시공문제를 병행하여 검토할 필요가 있다. 대공간 건축물 시공에 있어서 erection 공법은 공사비용, 공사기간 그리고 안전성 등에 큰 영향을 주는 것으로 알려져 있다. 대공간 건축물 erection 공법은 현장 여건 및 제반 조건에 따라서 그 수를 헤아릴 수 없을 정도로 많고 다양하지만, 대표적인 공법으로는 Element 방식, Block 방식, Sliding 방식, Lift-up 방식 그리고 복합방식 등이 있다. 본 연구에서는 기존 대공간 건축물을 대상으로 시공당시 적용한 erection공법을 조사하여 이것을 규모별, span별, 층고별, 구조형식별로 분석 및 검토하여 향후 대공간 건축물의 효율적 erection 공법 개발을 위한 기초 자료를 제공하는데 그 목적이 있다.

아직 우리나라에는 대공간에 대한 정의는 없으나 일반적으로 30미터 이상 장 스팬을 갖고 있거나 바닥면적이 넓어 화재발생시 길찾기가 어려운 건축물이라 할 수 있다. 본 연구에서는 이러한 대공간 건축물의 피난안전성 확보를 위한 기초연구로서 국내외 대공간 건축물의 화재 사건 분석을 통하여 재실자의 피난특성을 파악하고자 한다.