The powered purse seine fishery is an important fishery accounting for 19.4% of adjacent water fishery production in Korea, and the commercial fishing is associated with high rate of fatal and non-fatal occupational injury. The hazard analysis for the fishermen’s safety of offshore large powered purse seiner was conducted to serve as a basic data for improving the healthy and safe working environment of fishermen using fishermen’s occupational accidents of the national federation of fisheries cooperatives (NFFC) in 2013 (n=583). As a result, the occupational accident occurrence rate of this fishery was 182.6‰ in all industries 30.9 times the rate of that. In addition, death and missing rate was found to have a very serious level management to 25.1‱ in all industries of death of 17.5 times. The accident occurred in 72.3 to 85.8% was happened at sea. The others, slipping and struck by object etc occurred more frequently in order in the frequency of accident occurrence pattern. However, the occurrence rate of death and missing did not match the frequency of accident pattern. In other words, slipping occurred frequently higher while death and missing risk was not high. And the contact with fishing gear and fall in the waters was low while death and missing risk was high. The results are expected to contribute for identification and assessment of safety hazard occurred in offshore large powered purse seiners.

I selected a hypermarket as a research target by investigating energy consumption and total area of each 11 hypermarkets and suggested energy saving key elements by analyzing the cooling and heating loads. I completed a calibrated simulation model by searching literature, site survey and dynamic simulation tool. I separated the energy-saving elements into architectural and facility sections by searching domestic standards as well as theses, and applied those elements to the calibrated simulation to calculate the energy consumption. Then I suggested energy saving elements that suitable for the hypermarkets by comparing each energy consumption of architectural and facility sections.

This paper is a study on the elasto-plastic analysis of reinforced concrete precast large panel connections by rigid element spring model. In the analysis of rigid element spring model, each collapsed part or piece of structures at limiting state of loading is assumed to behave like rigid bodies. The present author propose new elements for the improement and expansion of the rigid element spring model. In this study, it is proposed how the rigid element method can be applied to the elesto-plastic analysis of precat large panel connections. Some numerical results of analytical modeling and load displacement curves are shown.

수산업분야의 생력화와 조업공정의 단축으로 새로운 활로를 개척할 수 있는 방안으로 보조기계들의 유압화 및 대형화에 사용되는 후벽 유압실린더는 작동응력 거동의 분석과 파손예측의 정확성이 강구되어야만 기계고장으로 인한 해난사고의 개연성을 미연에 감소시킬 수 있다. 균일한 내압을 받는 대형선박용 유압실린더를 수치해석적 방법인 경계요소법을 사용하여 각종 응력 해석의 시도는 엄밀해나 유한요소법의 결과와 비교적 양호하게 일치하고 있다. 축대칭 형상에 대한 반경방향 응력이나 원주방향 응력의 BEM 해석결과는 단일절점과 이중절점 모두 최대 25MPa의 압축응력이나 최대 52MPa의 인장응력이 작용하고 있으므로 재료의 허용응력내에서 작동하고 있음을 알 수 있다. 이중절점 형상함수(double node shape function)를 사용하여 원통형 형상의 구조물에 대한 수치계산 결과의 정확도를 높힐수 있었으며 입력데이터의 증가는 오차감소에 기여하였으나 프로그램의 실행시간(run-time)을 증가시켰다. 코너에서의 트랙션벡터의 불연속 현상을 해결하기 위한 이중절점의 사용은 영역 내부해의 안정성을 확보하였고 경계부근에서의 내부해의 발산을 제거하기 위한 이중지수형 적분법 사용은 해석결과의 오차를 효과적으로 감소시켰다.