The repair of manhole raise has been caused much construction times and disruption of traffic flow, serious environmental pollution from crushed construction wastes, and budget waste due to the repeated repair construction works. In order to overcome such problems, we have developed the new manhole repairing composite structures by using a glass fiber-reinforced polymer (GFRP) pipe, which can raise manhole to the regular height of the overlayed road pavement with rapid construction and minimum traffic jams. This environmental-friendly technology is method completed by the methyl methacrylate monomer (MMA) double wide flanged GFRP pipe composite structures in order to raise manhole to the regular height. In this paper, two kinds of the compressive strength tests of MMA mortar composites were conducted and evaluated by a general compressive strength test, and compressive strength test after freezing-thawing resistance test. It was found that this MMA mortar composites will be used for the application of the double wide flanged GFRP pipe composite structures.

This study is basic experiment for estimating influence of strength by curing temperature of concrete's heat of hydration and estimate relationship of compressivε strength development by initial curing temperature factor, and then asume temperature factor which influence compressive strength development and for showing basic document of quality control. According to the result of cement mortar by the curing temperature factor high-curing temperature shows high strength on 3 day compare with low curing-temperature, shows higher strength than the piece of high curing temperature.

In this study, five high intelligent concrete (HIC) test specimens were fabricated by reinforcing the cement mortar with garnet, fiber (nylon and polypropylene), and shape memory alloy (SMA), to examine the effects of the numbers and positions of the reinforcements on the physical characteristic of the SMA. In improving the yield strength and structural self-rehabilitation capability, two or more hybrid fiber, PP and SMA reinforcements, as in SMA-PP, SMA-NP, SMA-2 yielded better results than SMA-1.

This paper showed evaluations of mechanical performances of High-Performance Fiber Composite Mortar which made by cement free binders with Alkali-activated slag and PVA fibers with the volume fraction of 1~1.5%. Specimens were subjected to compressive, tensile and shear strength test and the test results showed their high performance mechanical characteristics.

This paper showed evaluations of mechanical performances of High-Performance Fiber Composite Mortar which made by cement free binders with Alkali-activated slag and PVA fibers with the volume fraction of 1~1.5%. Specimens were subjected to compressive, tensile and shear strength test and the test results showed their high performance mechanical characteristics.

There is an increasing need for new materials and methods for rapid but durable repair of concrete. The author outlines the main properties and reports on some aspects of durability derived from laboratory investigation. Micro-fibre reinforced polymer cementitious materials provide early strength materials and can be considered dimensionally stable. Compressive and bonding strengths show a satisfactory strength. Meanwhile, the micro-fibre reinforced polymer cementitious materials had a low permeability which doesn’t allow water vapour to diffuse through the matrix. Details are expected to be given of successful applications on most of all concrete structures.

While carrying out a series of study for improving the durability of High Volume Admixture Concrete using the ERCO, we found that the resistance of freezing and thawing declined due to the decrease of air amount in concrete when using the ERCO. In order to solve the problem, we carried out an experiment using the DEM. As a result of that, it did not affect the basic characteristic of concrete, and the problem of decreasing air amount caused by using the ERCO is also considered to be solved by securing the target air amount.

본 연구에서는 원적외선의 방출을 증진시켜 쾌적한 실내 환경을 조성시키며 아울러 비중이 높은 재료를 사용하여 층간소음을 저감시키기 위한 방안으로서 건축용 친환경 바닥 마감재에 자철석 잔골재를 사용하는 모르터의 기초물성 연구를 수행하였다. 실험에 사용된 모르터의 배합은 자철석 잔골재를 자연사로 0, 20, 40, 60, 100% 치환하였다. 먼저 원적외선 방출성능으로서 방사율과 방사에너지를 측정하여 KICM의 기준을 훨씬 상회하는 결과를 얻었다. 단위용적질량 압축강도 실험결과 치환율이 증가함에 따라 선형적으로 증가하는 결과를 얻었다. 그러나 건조수축 시험결과 자철석 잔골재의 치환율이 증가함에 따라 건조수축 변화율이 기준 시험체 대비 급격하게 증가하는 것으로 나타나 향후 이를 해결하기 위한 방안이 강구되어야 함을 알 수 있었다.

In this research, it is shown a nonlinear analysis of reinforced concrete (RC) composite columns by applying high-performance fiber-reinforced cementitious composite(HPFC) mortar. The developed model was considering the high-ductile characteristic of HPFC mortar. In the result, the analysis by the model was well predicted the experimental behaviors the RC composite column.

In this project a preliminary experimental research work was done to apply mortars containing magnetite as fine aggregates unto floor finishing materials in order to make indoor environment eco-friendly. Crushed magnetites is going to be substituted as sands in the mix design. Far-infrared radiation tests to determine emissivity and emission power were done in accordance with the KICM test standard and an outstanding result was obtained.

본 논문에서는 FR-ECC의 수축특성과 균열도입 전후의 내동해성을 평가하였으며, FR-ECC를 활용한 다층복공구조의 지수성능과 박리박락저항성, 또한 FR-ECC로 단면복구 된 보부재의 휨성능을 평가하였다. 그 결과, FR-ECC는 소성수축에 의한 균열 및 건조수축에 의한 길이변화율이 기존의 보수모르터에 비해 크게 저감되었으며, 구속상태에서의 건조수축에 대한 균열저항성이 개선됨을 알 수 있었다. 또한, FR-ECC는 내동해성이 매우 우수하였으며, 균열도입 후에도 동결융해작용에 의한 인장성능의 저하는 확인되지 않았다. 한편, FR-ECC로 보수된 휨부재는 초기균열모멘트, 항복모멘트 및 극한모멘트 등의 휨성능이 증대되었으며, 멀티플크랙 특성에 의해 휨파괴시까지 균열폭을 안정적으로 제어할 수 있었다.

본 논문의 목적은 경량기포모르터를 충전한 스틸스터드와 복합스터드 내력벽체의 내화성능을 KS규준에 따라 평가하는데 있다. 주거용과 상업용 건물의 최소 내화 요구시간은 2시간이다. 시험 결과로부터 스틸 스터드와 복합스터드에 경량기포 모르터를 충전한 두 시험체 모두 2시간 내화 성능을 만족하는 것으로 나타났다. 또한 복합스터드 패널 시험체의 경우 내화 성능면에서 스틸 스터드 패널 시험체 보다 우수하다는 것을 정량적 평가하였다.