Although the Ti–6Al–4V alloy has been used in the aircraft industry owing to its excellent mechanical properties and low density, the low formability of the alloy hinders broadening its applications. Recently, laser-powder bed fusion (L-PBF) has become a novel process for overcoming the limitations of the alloy (i.e., low formability), owing to the high degree of design freedom for the geometry of products having outstanding performance used in hightech applications. In this study, to investigate the effect of bulk shape on the microstructure and mechanical properties of L-PBFed Ti-6Al-4V alloys, two types of samples are fabricated using L-PBF: thick and thin samples. The thick sample exhibits lower strength and higher ductility than the thin sample owing to the larger grain size and lower residual dislocation density of the thick sample because of the heat input during the L-PBF process.

Because magnets fabricated using Nd-Fe-B exhibit excellent magnetic properties, this novel material is used in various high-tech industries. However, because of the brittleness and low formability of Nd-Fe-B magnets, the design freedom of shapes for improving the performance is limited based on conventional tooling and postprocessing. Laserpowder bed fusion (L-PBF), the most famous additive manufacturing (AM) technique, has recently emerged as a novel process for producing geometrically complex shapes of Nd-Fe-B parts owing to its high precision and good spatial resolution. However, because of the repeated thermal shock applied to the materials during L-PBF, it is difficult to fabricate a dense Nd-Fe-B magnet. In this study, a high-density (>96%) Nd-Fe-B magnet is successfully fabricated by minimizing the thermal residual stress caused by substrate heating during L-PBF.

Incheon is an area where complaints about odors occur frequently and there are many sources of odor emission. In this study, we used a real-time monitoring device to measure the odorous concentration near the areas where there are complaints about odors. The measurements were carried out for the three areas (G, C, S) that are located around emissions sources. G is situated in an industrial complex that has a reputation for being one of the most foul smelling regions of Incheon. A petroleum refining plant and storage facility are located around C. S is a residential area nearby an industrial site. The concentration of major designated odor substances in the G and S areas satisfied the site boundary emission standards. With regard to the characteristics of odor substances by region, although the C area region had the highest odor intensity among the three regions due to the odor intensity near the oil storage facility areas G and S were similar in terms of odor intensity. In the region of the G area, the odor intensity was slightly higher at the northern side of t he industrial complex. In terms of the odor intensity of the designated odor substances, trimethyl amine was the strongest, followed by hydrogen sulfide. The real time monitoring system was necessary to analyze the changing trends of odor substances and for the determination of major odor sources. This study was conducted to identify the material causes of odors in areas of Incheon where there are frequent complaints about major odors.

The annual number of odor complaints increased about 10 times over 14 years from 4,302 in 2005 to 40,854 in 2019, in Korea. Especially, livestock facilities account for more than 50% of the odor complaints and the swine farms account for the most odor complaints among livestock. It is therefore necessary to manage swine farms as the major odor emission source. In this study, a real-time odor monitoring system equipped with PTR-TOF-MS (proton transfer reaction time-of-flight mass spectrometric) was used to measure the odorous substances in two swine farms. Odorous substances emitted from outlets were sampled and measured at the two types of swine farms. In addition, the boundary spots were designated as measurement points. As a result, the rankings of the odorous substances in order, from highest to lowest, were ammonia, acetaldehyde, methyl mercaptan, fatty acids, etc. and the level of odor intensity was 0.8-4.4 at the outlet of the swine farms. The concentration at the boundary decreased between 1/100 ~ 1/10000 compared to the concentration emitted from outlets. Base on the results of evaluating odor activity values, Skatole and p-Cresol were estimated as major odor substances in swine farms.

This study aimed to examine the major domestic and foreign regulations related to the production of organic products. The production and consumption of organic products have been expanding due to the increase in consumer demand for safe food, as well as improved certification procedures and industry trends. In case of organic mushrooms, there were 405 certified farms nationwide in 2021, with a cultivation area of 3,886,628 m2 and a planned production of 6,011 tons. Jeollanamdo has 221 farms, a cultivation area of 2,923,402 m2, and a certification plan for 2,132 tons. Shiitake mushrooms are ranked first with 369 farms, a cultivation area of 3,805,636 m2, and a certification plan for 3,576 tons, representing 91% of the farms, 98% of the cultivation area, and 60% of the certification planning.

The CoCrFeMnNi high-entropy alloy (HEA), which is the most widely known HEA with a single facecentered cubic structure, has attracted significant academic attention over the past decade owing to its outstanding multifunctional performance. Recent studies have suggested that CoCrFeMnNi-type HEAs exhibit excellent printability for selective laser melting (SLM) under a wide range of process conditions. Moreover, it has been suggested that SLM can not only provide great topological freedom of design but also exhibit excellent mechanical properties by overcoming the strength–ductility trade-off via producing a hierarchical heterogeneous microstructure. In this regard, the SLM-processed CoCrFeMnNi HEA has been extensively studied to comprehensively understand the mechanisms of microstructural evolution and resulting changes in mechanical properties. In this review, recent studies on CoCrFeMnNi-type HEAs produced using SLM are discussed with respect to process-induced microstructural evolution and the relationship between hierarchical heterogeneous microstructure and mechanical properties.

자기(瓷器)는 조선의 중요한 대외 교역 물품이 아니었다. 조선은 전국에 걸쳐 자리하는 가마에서 필요한 백자를 생산했으므로 자기를 만들지 못한 나라들과는 수입해서 사용하는 그 릇의 종류와 크기, 수량이 달랐다. 유럽 등지에서는 새롭고 이국적인 동아시아의 자기가 여 러 왕실과 귀족들의 수집품이 되었지만 조선은 자기 자체를 이미 수 세기 동안 일상의 그릇 으로 사용해왔으므로 다양한 문양이 장식된 일부 청화백자나 오채자기 위주로 중국과 일본의 자기를 들여왔다. 서울 시내 출토양상을 보자면 조선 후기 한양도성에 유입된 외국 자기의 수량은 조선 전 기에 비해 상대적으로 줄어드는 모양새다. 19세기 후반 이후에는 유상채 자기의 증가 현상 이 추가되지만 청화백자로 만든 발과 접시 등 반상기가 외국 자기의 주류를 이루는 특징은 조선 전기 이래로 계속 이어졌다. 조선시대 해외 교역이 사행이나 일부 상단을 중심으로 이루어지다 보니 중국과 일본의 물 산은 자연스럽게 왕실과 사행에 직접 참여하는 관리, 역관 혹은 상인 계층을 시작으로 소비 의 흐름이 마련되었다. 서울 시내에서 조선 후기 외국 자기들이 출토되는 유적이 궁궐이나 그 주변 혹은 시전행랑이 자리하는 종로대로 일대에 주로 위치하는 것도 이러한 상황이 반영 된 것으로 파악할 수 있다

본 연구는 시중에 유통 중인 유산균 첨가 시료 6개를 7개월 동안 저장하여, 유산균 생균 수의 변화와 우수 균종을 분리 및 분석하고자 하였다. 제품별 저장 기간에 따라 유산균 생균 수의 변화는 MRS agar에서 9.04 Log CFU/g에서 7.20 Log CFU/g, BCP agar에 서 8.96 Log CFU/g에서 7.63 Log CFU/g으로 7개월이 경과한 후에 유의적으로 감소하였다. 식품위생검사기관에서 기간별 시료의 평균 유산균 생균 수는 6.58 Log CFU/g 이상 유지하여, 본 연구 결과와 76.0%–100% 일치하는 경향을 나타냈다. 제품의 유 산균 표시 함량은 2.7×106–6.2×106 CFU/g으로 표시되었으며, 본 연구 결과에서 1.5×107–1.4×108 CFU/g 이상 검출되어 실제 외포장지의 표시 함량은 올바른 표시에 부합되었다. 검출된 유산균 중 우점종(85%)을 최종 선발하여 16S rRNA 유전자 염기서열 분석 결과, Lactiplantibacillus(identity 100%), Streptococcus thermophilus 10%(identity 99%) 및 Weissella confusa 5% (identity 99%)로 동정되었다. 이는 본 연구의 시료에서 검출된 우수 균주로, 위 균주 외에 또 다른 우수한 균주를 선발하여 식품에 접목하는 연구가 필요한 것으로 생각된다. 또한 6개 제품 모두 7개 월 후 유산균 수 함량이 107–108 CFU/g으로 확인되었으며, 실험한 제품류(비스킷류, 샌드류 및 초콜릿류)의 외포장지에 표시된 유산균 함량은 본 실험의 결과보다 적게 표시되었으며, 유통기한(6개월) 동안 유산균의 함량은 유지되었다.

In this study, actual odor conditions were investigated in restaurants, livestock facilities, and major odor discharge facilities around daily life, and an odor modeling program was performed to find ways to improve odors in odor discharge facilities. The odor modeling results of restaurants around daily life showed that the complex odor concentration of large restaurants, which are close to residential areas, is higher than the acceptable complex odor standard at the receiving point. It was judged that a plan to increase the height of the restaurant odor outlets and a plan to reduce the amount of odor discharge was necessary. As a result of modeling the life odor of livestock housing facilities, when the distance from the housing facility is far away, the actual emission concentration is much lower than the acceptable emission concentration at the receiving point. It was judged that such facilities need to be reviewed for ways to reduce the emission of odorous substances, such as sealing the livestock housing facilities or improving the livestock environment. The main odor emission business sites that show complex odor concentration as 1,000 times or greater than the outlet odor emission standard were businesses associated with surfactant preparation, compounded feed manufacturing, textile dyeing processing, and waste disposal. Due to the separation distance and high exhaust gas flow rate, it was found that odor reduction measures are necessary. In this study, it was possible to present the allowable odor emission concentration at the discharge facilities such as restaurants, livestock houses, and industrial emission facilities by performing the process of verifying the discharge concentration of the actual discharge facility and the result of living odor modeling. It is believed that suitable odor management and prevention facilities can be operated.

본 논문은 고령운전자의 운전 면허증 자진 반납을 유도하기 위하여 운전 시뮬레이터를 활용한 안전 운전 수행능력 평가 콘텐츠를 제안하고자 한다. 사용빈도가 많은 학술 데이터베이스에서 운전 시뮬레이터를 사용한 고령운전자 대상의 운전 능력을 평가하는 관련 문헌들을 검색한 후, 텍스트 네트워크를 사용하여 주행에 관련된 키워드들 간 연결중심성, 근접중심성, 매개중심성을 분석하였다. 이에 대한 결과로 도로유형 별 주행에서는 2차선과 4차선의 고속도로에서 연결중심성, 고속도로와 교차로에서는 매개중심성이 높게 나타났다. 그리고 주행상황 별 평가내용 키워드 분석 결과 에서는 연결중심성이 ‘좌회전’, ‘무단횡단’, ‘정체된 차량 회피’ 등에서 높게 나타났으며, 매개중심성에 서는 ‘좌회전’이 가장 많이 사용되는 평가내용으로 나타났다. 하지만 도로유형별 주행상황과 이에 대한 평가내용에 대한 근접중심성이 매우 유사하게 나타난 것은 각각의 실험 설계가 서로 비슷하다는 것을 의미한다.

In this study, real-time monitoring of air quality using a real-time mobile monitoring system was conducted to identify the emission characteristics and current status of air pollutants and odorous substances that are mainly generated in domestic dyeing industrial areas and to trace the pollutant sources. The concentration of toluene in the industrial area was detected up to 926.4 ppb, which was 3 to 4 times higher than that of other industrial areas. The concentration of methylethylketone was 124.7 ppb and the concentration of dichloromethane was 129.5 ppb. Acrolein concentration was highest at E point at 521.6 ppb, methanol concentration was highest at D point at 208.8 ppb, and acetone concentration was highest at M and N points at 549.3 ppb. The most frequently detected concentration of pollutants in the air quality monitoring results in the industrial area was, in descending order, toluene > methanol > acrolein > dichloromethane > acetone, which was similar to the chemical emissions used in the industrial area by the Pollutant Release and Transfer Register data. The concentration of odorous substances measured in real time was compared with the concentration of minimum detection, and the concentration of hydrogen sulfide was about 10 times higher than the concentration of minimum detection at A point, which was judged to be the main odorous cause of A point. In the future, if the real-time mobile measurement system is constructed to automatically connect wind direction/wind speed, PRTR (Pollutant Release and Transfer Register) data and SEMS (Stack Emission Management System) data, etc., it was judged that more accurate monitoring could be performed.

In this study, the grid field olfactory odor method was supplemented to the domestic situation in the surrounding areas of a domestic science industrial complex. The actual condition of the occurrence of odor frequency in the field was then investigated over the first period of late spring to summer and the second period of autumn in 2017. The frequency of odor occurrence in the area around the science industrial complex was increased as odor discharge facilities in the nearby area were concentrated. The odor occurrence frequency of the total period was 0.09~0.28, that of the first period was 0.08~0.32, and that of the second period was 0.05~0.25. The odor occurrence frequency in summer was higher than in autumn. The frequency by which the measurement of odor occurrence by smell type was most dominant was mainly smell of chemicals, plastics, and livestock houses during the first period, and the smell of chemicals, burning gases, and plastics during the second period. And the frequency of each smell type was judged to be different according to season. The odor occurrence frequency was measured as higher than 0.15, which is the standard of Germany's odor frequency in an industrial area, and it was judged that measures for odor management in the region were necessary. Since most of the odor discharge facilities are non-continuous systems and the odor generation frequency is more important than the concentration of the minimum detection concentration, it was judged that the German grid method can reflect the odor occurrence characteristics of the odor complaints or receptors for a certain period of time compared to the domestic measurement method. In the future, it was judged that the field olfactory odor method would be able to replace the evaluation method of odor assessment in Korea with the survey method of odor assessment under actual conditions in areas where it is difficult to access the odor discharge source or the receptor where odor complaints occur.

본 연구는 실제 대인관계에서 형성된 관계의 친밀감이 게임 플레이 시 플레이어의 게임 및 사용자 경험에 영향을 줄 것이라 보았다. 그러나 사회적 관계 정도에 따른 게임 사용자 경험에 차이가 있음에도 불구하고 지금까지의 선행 연구에서는 게임 플레이어의 사회적 네트워크나 팀워크에 대해 분석한 연구는 매우 드물다. 따라서 본 연구는 모바일 전략 게임 내에서 플레이어 간의 사회적 관계 정도가 게임에 대한 협동심, 만족, 이용의도에 미치는 효과를 검증하기 위해 모바일 게임 앱 플레이테스트 실험처치 방법론을 통해 분석하였다. 또한 사회적 관계에 따른 효과의 차이를 순수하게 알아보기 위해 참여자의 게임 몰입(Flow)을 공변량(Covariance)으로 하여 공분산분석(ANCOVA)을 실시하였다. 본 연구는 실시간 전략 게임인 ‘클랜시 오브 로얄' 게임 앱을 이용하여 진행되었다. 연구결과, 사회적 관계가 높을수록 게임에 대한 협동심과 만족은 높아지는 것으로 나타났다. 이러한 본연구의 결과는 모바일 게임 기획 시 플레이어의 인적 네트워크와 게임 진행 방식에 대한 이론적, 실무적 함의를 갖는다.

Selective laser melting (SLM), a type of additive manufacturing (AM) technology, leads a global manufacturing trend by enabling the design of geometrically complex products with topology optimization for optimized performance. Using this method, three-dimensional (3D) computer-aided design (CAD) data components can be built up directly in a layer-by-layer fashion using a high-energy laser beam for the selective melting and rapid solidification of thin layers of metallic powders. Although there are considerable expectations that this novel process will overcome many traditional manufacturing process limits, some issues still exist in applying the SLM process to diverse metallic materials, particularly regarding the formation of porosity. This is a major processing-induced phenomenon, and frequently observed in almost all SLM-processed metallic components. In this study, we investigate the mechanical anisotropy of SLM-produced 316L stainless steel based on microstructural factors and highly-oriented porosity. Tensile tests are performed to investigate the microstructure and porosity effects on mechanical anisotropy in terms of both strength and ductility.

이 연구의 목적은 한국의 사회적 경제 조직의 특성을 찾아보는 데에 있다. 그중에서도 사회적기업, 마을기 업, 협동조합을 중심으로 살펴본다. 우선, 미국과 유럽의 사회적 경제에 대한 개념을 비교하여 특성을 도출 하고, 이를 비교의 대상으로 삼는다. 서양의 사회적 경제와는 다르게, 한국의 사회적 경제는 정부에 의해서 정책적으로 도입 및 추진되었다. 구체적으로 사회적기업은 고용노동부에 의해, 마을기업은 행정안전부에 의해, 협동조합은 기획재정부에 의해 관리되고 있다. 그렇기 때문에 한국의 사회적 경제 조직은 정부의 영 향으로부터 자유로울 수 없다. 물론, 사회적 경제의 토양이 부족한 한국에서 빠른 시간 안에 사회적 경제가 가져올 성과를 낼 수 있다는 장점이 있다. 하지만 이렇게 성장한 사회적 경제가 진정한 의미의 사회적 경제 에 해당하는지에 대해서 진지한 성찰과 고민이 필요하다

In this study, we conducted a survey on odor characteristics of single odor and collective odor facilities using the German olfactory odor method and carried out the odor frequency modeling. The influence of the odor from a sewage treatment plant, which is a single discharge facility, was strong in the eastern and northern parts of the plant and appeared to be in good agreement with the areas where the odor complaints were frequent. The German olfactory method reflects the odor complaints and odor occurrence characteristics of the receptors as compared with the domestic odor measurement method. The influence of the odor from the odor control area, which is a collecting and discharging facility, showed a tendency in which the sum of the odor occurrence frequency increased with the proximity of the odor discharge facility to the dense industrial complex. Furthermore, it was judged that it is not easy to extract the odor frequency results for individual facilities because the survey subject is the group discharge facility area. Therefore, it will be necessary to introduce a method to manage odor in the future. In this study, the measurement of odor frequency using the German olfactory odor method is partially applied to some odor sources. Appropriately, it is not applicable to various emission sources. However, the odor measurement method based on odor occurrence frequency and odor sensory can be used for investigation of the actual condition, permits of odor discharge facilities and the environmental review.

본 연구는 외국인 소비자들을 대상으로 한류콘텐츠 만족도 및 노출도가 한국산 제품 구매의도에 미치는 영향을 자민족중심주의의 조절효과를 중심으로 실증분석하고 있다. 287명의 외국인 소비자들을 대상으로 실증분석을 실시한 결과 첫째, 한류콘텐츠 만족도와 노출도는 모두 한국산 제품의 구매의도를 높이는 것으로 나타났다. 이러한 결과는 한류콘텐츠에 만족하거나 빈번하게 노출되는 외국인 소비자들의 경우 한국산 제품에 대한 긍정적인 원산지 효과로 인해 한국산 제품의 구매의도가 높아질 수 있다는 것을 시사한다. 둘째, 자민족중심주의의 조절효과를 검증한 결과 자민족중심주의는 한류콘텐츠 만족도와 한국산 제품 구매의도 간의 관계뿐만 아니라 한류콘텐츠 노출도와 한국산 제품 구매의도 간의 관계 모두에서 부(-)의 조절효과를 보이는 것으로 나타났다. 자민족중심적 성향을 지닌 소비자들의 경우 자국산 제품을 애용해야 한다는 신념을 가질 수 있다. 즉, 이러한 결과는 한류콘텐츠 만족도 및 노출도가 한국산 제품 구매의도에 긍정적인 영향을 미친다 하더라도 자민족중심주의가 높은 경우, 이들 간의 긍정적인 관계가 약화될 수 있다는 것을 의미한다. 최근 한류가 사회적으로 큰 관심을 받고 있는 가운데외국 소비자의 한국산 제품 구매의도에 있어 한류콘텐츠의 만족도 및 노출도와 자민족중심주의 간 상호작용효과를 규명하였다는 점에서 본 연구는 국제마케팅 분야에 의미 있는 이론적 시사점을 제시할 수 있을 것으로 판단된다. 뿐만 아니라 본 연구의 분석결과는 한류콘텐츠를 활용하여 해외 시장으로의 진출을 고려하는 많은 한국 기업들에게 유용한 실무적 시사점 역시 제시할 수 있을 것으로 기대된다.

미디어의 구성 요소 중 하나인 사운드는 인간의 청각은 물론 인지와 지각을 자극하여 사용자가 상황이나 공간에 대해 보다 쉽게 이해할 수 있도록 하고 미디어가 전하고자 하는 정보를 효과적으로 전달하는 역할을 한다. 그러한 측면에서, 게임에서의 효과음은 콘텐츠를 전달하는데 중요한 역할을 한다. 게임이 플레이되는 동안 연출되는 다양한 효과음은 사용자에게 밝은 분위기를 조성하고 게임 진행의 긴장감을 놓치지 않게 하며 사용자가 자연스럽게 게임에 집중하게 만든다. 특히 게임에서의 자연스러운 효과음은 게임의 배경음악과 더불어 사용자의 몰입과 사실성을 증대시킨다. 본 연구는 게임 효과음의 사실성 정도에 따른 공간적 실재감, 몰입, 정서적 자기조절, 공격적 태도 및 공격 행동을 측정하기 위해 플레이테스트 실험 방법론을 수행하였다. 실험에 사용된 FPS 게임은 'Left 4 Dead 2'이며, 무기 효과음을 다르게 처치하여 남녀 각각 40명씩 총 80명을 대상으 로 실험을 수행하였다. 연구결과, 공간적실재감, 몰입, 그리고 정서적 자기조절은 실재음을 사용한 게임에서 더 높은 수준을 보였다. 또한 공격적 태도 역시 사실적인 무기 효과음을 사용한 게임에서 더 높은 수준을 나타냈다. 본 연구는 게임 효과음의 사실성이 사용자의 게임 경험과 감정, 그리고 공격성에 영향을 미칠 수 있다는 점에서 향후 게임 효과음 디자인에 대한 이론적 함의를 제공한다.

Nanosized Gd2O3:Eu3+ red phosphor is prepared using a template method from metal salt impregnated into a crystalline cellulose and is dispersed using a bead mill wet process. The driving force of the surface coating between Gd2O3:Eu3+ and mica is induced by the Coulomb force. The red phosphor nanosol is effectively coated on mica flakes by the electrostatic interaction between positively charged Gd2O3:Eu3+ and negatively charged mica above pH 6. To prepare Gd2O3:Eu3+-coated mica (Gd2O3:Eu/mica), the coating conditions are optimized, including the stirring temperature, pH, calcination temperature, and coating amount (wt%) of Gd2O3:Eu3+. In spite of the low luminescence of the Gd2O3:Eu/mica, the luminescent property is recovered after calcination above 600℃ and is enhanced by increasing the Gd2O3:Eu3+ coating amount. The Gd2O3:Eu/mica is characterized using X-ray diffraction, field emission scanning electron microscopy, zeta potential measurements, and fluorescence spectrometer analysis.