The purpose of this study was to make a pants pattern suitable for women 70 to 85 years of age, then analyze that- pattern’s shape, size, appearance, fit, allowance and air gap. Participants made the pattern using 3D simulation program DC Suite version 5.1. The results suggest a design method suitable for the lower-body shapes of elderly women. In external appearance, the A-type earned the highest evaluation in all items except the allowance of the back waist and back hip. The L type earned the highest evaluation in the allowance of back waist and hips. The A-type’s, back waist appeared set at an angle that did not match the body shape of an old-old aged woman in the center-back-line setting. Therefore, the pattern method of A-type combined with L-type’s method of center back, produces an excellent pants pattern. Evaluation of the air gaps among patterns revealed that; the A-type showed the largest air gap in waist and hip circumference and the smallest air gap in thigh circumference. The waists, abdomen, and hip circumferences of older women often become larger while their legs become slimmer. This study accounted for those factors in determining a pattern suitable for the lower-body shape of old-old aged women. However, participants only analyzed four patterns and compared them with women 70 to 85, years of age. Therefore, it is necessary to develop industrial patterns applicable to a wide age group.

This study aimed to categorize women’s body shapes by type after extracting prototypes of 25~34 year old Korean woman. The standardizing research service project conducted by the Ministry of Commerce, Industry and Energy in 2005, divided the age ranges of adult women into three groups: 18~24 years (young), 25~34 years (young-adult) and 35~49 years (adult). This study utilized this age division method to create a concrete body type categorization schema with the most marriageable period, 25 to 34 years old as target age the target age group. We used, measurement data from the 7th Korean Human Body Size Survey (Size Korea) for the body shape analysis. We completed a statistical analysis using the statistical program SPSS 21. After creating the body types using CLO 3D, which is based on the 7th Korean human body measurements, we input data for the average size for each type into the Avata. We then compared and analyzed the cross sections using the Rapidform XOR program. The results of the type-specific characteristics are as follows: big square body of obese body, small square body of plain flat body with tall, plain square body of plain flat with short, triangular body of lower body obesity there was. Significantly, the results of this study should facilitate the development of various apparel products using mass customization or easy-order systems.

This study is based on the results of the 7th Korea Human Size Survey (Size Korea). The standard body shapes of Korean women between 25 and 34 years old were analyzed and used to develop a prototype princess line for wedding dresses. or this purpose I conducted a literature review and a survey of the actual situation of domestic ligaments. In order to select suitable ligaments for the standard body type of 25~34 year-old Korean women, I collected the most representative ligaments from around the world: Stock man from France, Superior from the USA, KIIYA from Japan, and Pig and Nonno from Korea. They were then compared and analyzed. In the form of a formal wedding dress, a prototype princess line was developed by a draping technique in order to finely implement the human body fitting. To develop the prototype of the princess line, I made test garments with muslin. 25 to 34 years old Korean female standard body type Three human subjects close to the average measurement value were selected as subjects. An exterior appearance evaluation questionnaire was created with 28 questions focusing on the main parts of the prototype princess line. The clothes were evaluated three times. In this study, aesthetic and functional elements were considered for the development of princess line prototypes for wedding dresses. In addition, the amount of spare area was given differently. This study is significant in the achievement of a dress line closest that closely matches the human body line of the standard Korean female body type.

The purpose of this study was to suggest torso patterns that fit the three main body shapes of elderly obese women. To reduce time, costs, and also the trial and error needed to make patterns, the CLO program for 3D test wear was employed. Three virtual models for aged obese women were use, with the YUKA system used to produce torso patterns. 3D simulation of test wear and corrections was done to design optimal torso patterns. The results were as follows: First, for the three models of obese women’s body shapes as realized by CLO 3D, Type 1 is lower-body obesity shapes, Type 2 is abdominal obesity shapes, and Type 3 is whole-body obesity shapes. Second, to design the study patterns, actual measurement values, back waist length and waist to hip length, were used. The armhole depth (B/4-1.5), front interscye (B/6+2.3), front neck width (B/12-0.5), front neck depth (B/12+0.5), front waist measurement (W/4+ 1.5+D), front hip measurement (H/4+2+0.5), and back hip measurement (H/4+3-0.5) were calculated using formulas. Third, according to the results of test-wearing the study patterns, reduced front neck width and depth improved the neck fit and reduced armhole depth bettered loose or plunging armhole girth and also reduced the sagging of bust c.. Also, tight sidesfrom aprotruded waist and abdomen improved with the increase of surpluses in the back waist and also back and front hip c. The exterior was enhanced by displacement of back and front darts, which distributed surpluses better.

The purpose of this study was to suggest torso patterns that fit the three main body shapes of elderly obese women. To reduce time, costs, and also the trial and error needed to make patterns, the CLO program for 3D test wear was employed. Three virtual models for aged obese women were use, with the YUKA system used to produce torso patterns. 3D simulation of test wear and corrections was done to design optimal torso patterns. The results were as follows: First, for the three models of obese women’s body shapes as realized by CLO 3D, Type 1 is lower-body obesity shapes, Type 2 is abdominal obesity shapes, and Type 3 is whole-body obesity shapes. Second, to design the study patterns, actual measurement values, back waist length and waist to hip length, were used. The armhole depth (B/4-1.5), front interscye (B/6+2.3), front neck width (B/12-0.5), front neck depth (B/12+0.5), front waist measurement (W/4+ 1.5+D), front hip measurement (H/4+2+0.5), and back hip measurement (H/4+3-0.5) were calculated using formulas. Third, according to the results of test-wearing the study patterns, reduced front neck width and depth improved the neck fit and reduced armhole depth bettered loose or plunging armhole girth and also reduced the sagging of bust c.. Also, tight sidesfrom aprotruded waist and abdomen improved with the increase of surpluses in the back waist and also back and front hip c. The exterior was enhanced by displacement of back and front darts, which distributed surpluses better.

Reflecting the consumer’s desire to look young, the “down-aging” trend, which blurs the distinctions between age groups, is the latest craze in the fashion market. The popularity of this trend made brand identities similar, resulting in customers becoming more interested in segmented notions of fashion (in terms of the story, design, high-quality material, etc.) regarding the product, and in particular, focus has become oriented to the fitness to the human body. In this sense, the researcher aimed to develop the prototype of a slim-fit tailored jacket that fits the standard somatotypes of women in their 30s well. For the purpose of this research, slim-fit tailored jackets from existing brands were collected and analyzed, and a subsequent wearability test was conducted based on the standard somatotype of women in their 30s. The research patterns were prototype of the developed slim fit tailored jacket are bust size of 3.8 cm, waist of 7 cm, and hip size of 3.8 cm. Then the research patterns were selected to develop the prototype of a properly fitting slim-fit tailored jacket. As outlined above, the development of a slim-fit tailored jacket prototype for the standard somatotypes of women in their 30s was conducted by solving the fitness issues of existing brands in order to produce properly fitting jackets that satisfy consumers.

The purpose of this study was to compare and analyze two original forms of slacks for thesis to extract outward appearance of design original form applying design measures of the above through diverse research methods. The results of this study are as follow: In original form F, the original form of slacks sloper suitable to elderly women 65～69 years old was W/4+3.5+0.5cm in the front/back circumference of waist, H/4cm in the front/back circumference of hip, (H/4+1+3.8)/2cm in the position of centerline, 19cm in actual measurement value of hip length, 25cm in actual measurement value of crotch depth, (knee crotch circumference～bottom line)/2+10cm and 90 (side waist dot～ lateral malleolus length)cm in actual measurement. front dart position was 1/3 and 2/3 of front waist centerline and back dart position was 1/3 and 2/3 of back waist circumference. It was suggested that front dart quantity (length) was 3.5(11)cm, back dart quantity 3.4 (10.2)cm, side waist up quantity 0.7cm, back down quantity 1.5cm, front crotch width (H/4+1)/4-1cm, back crotch width (H/4+1)/4+4, front knee width 21.8cm, back knee width 24.4cm, front pant leg 20.8cm, and back pant leg 23.4cm.

The purpose of this study is to suggest a designing method with excellent body suitability by analyzing clothingwearing porosity, comparing and analyzing patterns, and evaluating outer appearances by designing a prototype of study applied with design measurements for categories that have influence on the outer appearance of clothing through diverse research methods, by comparing and analyzing bunka and new bunka style basic pattern, which are proportional basic patterns most frequently used in schools for educational use to design bodice pattern for elderly women in their late 60s. As for the process of this study, the first stage selected study subjects, measured bodies. The second stage compared patterns of bunka and new bunka style basic pattern and evaluated outer appearances that deduced important pattern designing categories to design upper-torso bodice pattern of elderly women. The results of this study are as following ; As a result of comparing and analyzing bunka and new bunka style basic pattern, overall evaluation of outer appearance was excellent for new bunka style basic pattern, and bunka basic pattern received better reviews for the width and depth of front neck. In terms of waist circumference, waist front length, bust point location and bust point-bust point, bunka and new bunka style basic patterns showed a significant difference. new bunka style basic pattern had 4.5cm larger front armhole depth than bunka basic pattern, so it was evaluated to have more appropriate front armhole length, bust point location, and bust point-bust point. Through observation for primary excellent categories and precedent studies, 7 categories of front neck width, front neck depth, front interscye, back neck width, back neck depth, back interscye, and back armhole depth were deduced to have relations to the extra room around arm holes and waist that affect pattern designing method and porosity and evaluations of outer appearance.