Ti-6Al-4V alloy has a wide range of applications, ranging from turbine blades that require smooth surfaces for aerodynamic purposes to biomedical implants, where a certain surface roughness promotes biomedical compatibility. Therefore, it would be advantageous if the high volumetric density is maintained while controlling the surface roughness during the LPBF of Ti-6Al-4V. In this study, the volumetric energy density is varied by independently changing the laser power and scan speed to document the changes in the relative sample density and surface roughness. The results where the energy density is similar but the process parameters are different are compared. For comparable energy density but higher laser power and scan speed, the relative density remained similar at approximately 99%. However, the surface roughness varies, and the maximum increase rate is approximately 172%. To investigate the cause of the increased surface roughness, a nonlinear finite element heat transfer analysis is performed to compare the maximum temperature, cooling rate, and lifetime of the melt pool with different process parameters.

Solid state grain growth (SSCG) is a method of growing large single crystals from seed single crystals by abnormal grain growth in a small-grained matrix. During grain growth, pores are often trapped in the matrix and remain in single crystals. Aerosol deposition (AD) is a method of manufacturing films with almost full density from nano grains by causing high energy collision between substrates and ceramic powders. AD and SSCG are used to grow single crystals with few pores. BaTiO3 films are coated on (100) SrTiO3 seeds by AD. To generate grain growth, BaTiO3 films are heated to 1,300 oC and held for 10 h, and entire films are grown as single crystals. The condition of grain growth driving force is ΔGmax < ΔGc ≤ ΔGseed. On the other hand, the condition of grain growth driving force in BaTiO3 AD films heat-treated at 1,100 and 1,200 oC is ΔGc < ΔGmax, and single crystals are not grown.

Barnyard millet (Echinochloa esculenta) can be processed through soiling, hay, and silage, depending on the weather conditions during harvesting. However, research on barnyard millet is insufficient, and standards for cultivar, seeding density, and fertilizers have not been established. This study was conducted to examine the effects of seeding density and seeding methods on dry matter yields. For this, we used the early-maturing (Shirohie millet) variety of the barnyard millet. The experimental design included different seeding density (10 kg/ha, 15 kg/ha, 20 kg/ha (standard seeding density), 25 kg/ha and 30 kg/ha), and different methods of seeding (drill seeding and broadcast seeding). The seeding date was May 13, 2021, and the harvest date was July 13, 2021. Harvesting was carried out when the heading reached 40 %. Lodging occurred at 5, 9 and 7 at 20, 25 and 30 kg/ha densities in the broadcast seeding, but not in the drill seeding. With decreasing density of seeding, tillage number showed an increasing trend in both drill seeding and broadcast seeding (p>0.05). The plant heights were comparable in both drill seeding and broadcast seeding (p>0.05). The heading stage of barnyard millet was checked July 7 for drill seeding, and, on July 8 for broadcast seeding. It took 62 days, i.e., till July 13 for the heading to reach 40 % of the output. The dry matter yield of barnyard millet was significantly higher at the seeding density of 30 kg/ha, for both the methods of seeding (p<0.05). There was no difference in the chemical composition of grain, based on the seeding method and seeding density. However, as the seeding density increased, the CP, NDF, ADF, and TDN contents increased in both drill seeding and broadcast seeding. We found that, the dry matter content was the highest at the seeding density of 30 kg/ha for both the methods of seeding, but this was only 1.3 times higher than that of 10 kg/ha. Considering the seed price and labor force involved in seeding, it is advisable to have a seeding density of 15-20 kg/ha.

본 연구는 모기 매개체 감염병 예방을 위한 방역사업의 계획수립을 위하여 세종시의 모기 밀도 및 서식환경을 분석하여 방역 가이드라인 기초자료를 확립하는 것을 목적으로 수행되었다. 세종시 전반적인 모기분포 현황 조사를 위해 2019년 8월~10월까지 MOSHOLE과 유문등을 사용하여 일주일에 1회 1박2일 간의 모기 개체수를 조사하였으며, 구도심 (조치원읍)과 신도심 (보람동)의 밀도차 분석을 위해 2020년 4월~10월까지 DMS를 활용하여 매일의 모기 개체수를 조사하였다. 연구 결과 금남면에서 가장 많은 모 기가 포집되었으며 서식하는 우점 모기 종은 큰검정들모기, 빨간집모기인 것으로 나타났다. 모기 개체수에 영향을 미치는 토지피복 유형은 산림지역과 초지지역으로 나타났다. 질병 매개 가능성이 있는 모기 종 분석 결과 연서면과 금남면에서 다수 발견되었으며, 흰줄숲모기, 얼룩날개모기류, 작은빨간집모기 순서로 확인되었다. 각각 CO2와 빛을 유인제로 사용하는 MOSHOLE과 유문등의 채집효율을 비교 분석한 결과, CO2의 유인률이 높아 모기 포집 효율성과 생태계 안정성 보존을 위해 CO2를 유인제로 사용하는 것이 적합한 것으로 나타났다. 세종시의 모기 개체수는 구도심이 신도심보다 약 2배 정도 개체수가 많은 것으로 나타났다. 세종시는 구도심과 신도심으로 나누어져 있기 때문에 획일적인 방식으로는 눈에 띄는 방역 효과를 보기가 어려우며 효과적인 방역을 위해서는 방역의 차별성을 두어야 할 것으로 사료된다. 본 연구는 세종시의 통합적인 모기 방제 가이드라인의 기초작업으로 이루어졌으며, 본 연구의 결과로 모기를 매개로 하는 질병 확산을 제어하고, 모기로 부터의 피해를 줄이는 데 일조하기를 바란다.

Due to stricter environmental regulations of the International Maritime Organization (IMO), the number of ships fueled by Liquefied Natural Gas (LNG) is rapidly increasing. The International Code of the Construction and Equipment of Ships Carrying Liquefied Gases in Bulk (IGC Code) limits the material of tanks that can store cryogenic substances such as LNG. Among the materials listed in the IGC Code, ASTM A553M-17 has been recently adopted as a material for LNG fuel tank projects because of its excellent mechanical properties at cryogenic temperatures. In shipyards, this material is being used to build tanks through Flux Cored Arc Welding (FCAW). However, there is a problem that magnetization occurs during welding and there is a big difference in welding quality depending on the welding position. In order to overcome this problem, this study intends to conduct basic research to apply laser welding to ASTM A553M-17 material. As a result of analyzing the bead shape according to laser BOP speed and Energy density performed in this study, it was confirmed that the penetration and energy density are proportional but the penetration and BOP speed are inverse proportional to some extent. In addition, a range of suitable welding speed and energy density were proposed for the 6.1mm thickness material performed in this study.

PURPOSES : This study aims at evaluating the use of an electromagnetic density gauge (EDG) to measure the in situ density and air-void content of asphalt concrete (AC) pavement. METHODS : In situ AC pavement density and air-void readings were obtained from two sites (Daegu and Ulsan) using an EDG. Calibration of the EDG was conducted by first obtaining density values at three different positions, on each pavement where core samples were extracted afterward. The core samples were then tested to obtain laboratory density and air-void values. The density measured using the EDG was then subtracted from the laboratory values to obtain the offset calibration values, which were then adopted to calibrate the in situ measurements using the EDG. Moreover, to analyze the effect of moisture on the pavement surface, EDG measurements were conducted under dry and wet conditions to compare the in-situ readings. RESULTS : The in-situ density readings of AC tend to be higher in moist/wet conditions. By applying the calibration value to the EDG readings, the density error percentage was reduced from 0.61% to 0.096%, and 0.64% to 0.16% for Daegu and Ulsan sites, respectively. Consequently, the air-void content error percentage was reduced from 12.8% to 1.04%, and from 10.07% to 1.78% for Daegu and Ulsan sites, respectively. CONCLUSIONS : The electromagnetic density gauge (EDG) is an effective tool for the non-destructive measurement of in situ pavement density. By applying offset calibration values, the error in the field readings was reduced, and the accuracy of the EDG measurements was improved.

본 연구는 고밀도폴리에틸렌 코편을 마스크에 적용 후 MRI 검사에 사용하여 SNR의 변화를 측정하고 만족도를 평가하였다. 연구 방법은 팬텀을 이용하여 HDPE 마스크 적용 전 후의 SNR 측정과 KF 94 마스크 적용 전 후의 SNR 측정을 하였고, 사용한 기법은 T1WI, T2WI, DWI였다. 또한 HDPE 마스크 착용군의 T2 mDixon, 3D T1영상 획득 후 안와와 교뇌의 SNR을 측정하였고, 설문을 통하여 MRI 검사 시 답답함 정도와 호흡의 용이성, HDPE 마스크의 선호도 평가를 하였다. 팬텀 실험 결과 HDPE 마스크 사용 전과 후의 SNR은 유의한 차이가 없었으며(p>0.05), KF 94 마스크는 적용 전 값과 유의한 차이가 있었다(p<0.05). HDPE 마스크 착용군의 SNR 측정 결과에서는 미착용군과 유의한 차이는 없었다(p>0.05). 마스크 착용 후 답답한 정도 측정 결과 착용군은 3.53 ± 0.73, 미착용군은 3.83 ± 0.75이었고, 호흡의 용이성 측정 결과 HDPE 마스크 착용군은 3.1 ± 0.89, 미착용군은 3.27 ± 0.91으로 나타났고, 두 조사 결과 모두 유의한 차이는 없었다(p>0.05). HDPE 마스크의 선호도는 4.48 ± 0.54으로 선호도가 높은 것으로 나타났다. 본 연구 결과 HDPE 마스크는 착용 후에도 MRI 영상의 신호 변화 없이 정확한 검사가 가능하고 환자의 만족도 또한 높게 평가되었기에 검사 중 호흡기 감염 예방을 위해 적극적으로 사용되어야 할 것으로 사료된다.