본 연구는 정확한 열환경 평가를 위해 옥외 공간에서 체감하는 열쾌적성과 미기후 모델링을 통해 산출된 열쾌적지수의 차이점을 확인하는 것을 목적으로 한다. 이를 위해 대구광역시에 위치한 대학 캠퍼스 두 곳을 대상으로 하여 열쾌적성을 평가하는 두 가지 방법론을 적용하고 분석 결과를 비교하였다. 첫 번째 방법은 현장 설문조사를 기반으로 하여 시민들의 열쾌적성 정보를 수집하는 것이며, 두 번째 방법은 미기후 모델인 ENVI-met을 활용하여 열쾌적지수(PMV)를 수집하는 것이다. 또한, 열쾌적성에 영향을 미치는 요인을 파악하고자 그늘의 특성과 토지피복 특성을 기준으로 캠퍼스 내 상세 대상지를 선정하고 이러한 요인이 열쾌적성에 미치는 영향을 분석하였다. 분석 결과, 두 대학의 분석 일시와 장소가 달랐으나 방법론별 유사한 양상이 나타났다. 먼저, 설문조사 결과 그늘의 양이 증가할수록 쾌적한 것으로 나타났으며, 토지피복의 종류별 특성과는 다른 결과가 나타났다. 다음으로 모델링 결과 전반적으로 설문조사 결과와 비슷한 양상이 나타나지만 동일한 그늘의 특성을 가지는 세부 대상지에서 토지피복이 열환경에 부정적인 영향을 미치는 피복일 경우 열쾌적지수가 더 높게 나타났다. 결론적으로 설문조사 결과와 미기후 모델링 결과 간에 차이가 존재하며, 정책 반영을 위한 열쾌적성 정보의 수집 시 현장 기반의 체감 더위 정보의 수집을 통해 정확한 정보를 활용할 필요가 있을 것으로 판단된다.

The manufacturing companies under Make-To-Order (MTO) production environment face highly variable requirements of the customers. It makes them difficult to establish preemptive production strategy through inventory management and demand forecasting. Therefore, the ability to establish an optimal production schedule that incorporates the various requirements of the customers is emphasized as the key success factor. In this study, we suggest a process of designing the simulation model for establishing production schedule and apply this model to the case of a flat glass processing company. The flat glass manufacturing industry is under MTO production environment. Academic research of flat glass industry is focused on minimizing the waste in the cutting process. In addition, in the practical view, the flat glass manufacturing companies tend to establish the production schedule based on the intuition of production manager and it results in failure of meeting the due date. Based on these findings, the case study aims to present the process of drawing up a production schedule through simulation modeling. The actual data of Korean flat glass processing company were used to make a monthly production schedule. To do this, five scenarios based on dispatching rules are considered and each scenario is evaluated by three key performance indicators for delivery compliance. We used B2MML (Business To Manufacturing Markup Language) schema for integrating manufacturing systems and simulations are carried out by using SIMIO simulation software. The results provide the basis for determining a suitable production schedule from the production manager's perspective.

The objective of this study is to identify the research trend in the field of indoor environment in Korea. We collected 419 papers published in the Journal of the Korean Society for indoor environment between 2004 and 2018, and attempted to produce datasets using a topic modeling technique, Latent Dirichlet Allocation(LDA). The result of topic modeling showed that 8 topics (“VOCs investigation”, “Subway environment”, “Building thermal environment”, “School health”, “Building particulate matter”, “Asbestos risk”, “Radon risk”, “Air cleaner and treatment”) could be extracted using Gibbs sampling method. In terms of topic trends, investigation of volatile organic compounds, subway environment, school health, and building particulate matter showed a decreasing tendency, while the building thermal environment, asbestos risk, radon risk, air cleaners, and air treatment showed an increasing tendency. The results of this topic modeling could help us to understand current trends related indoor environment, and provide valuable information in developing future research and policy frameworks.

According to the changing environment of management, the concept of the one-to-one marketing is appeared in the environment of management by high Quality that customers needs. In this paradigm, CRM(Customer Relationship Management) offering integrated multiple view points is able to be executed by the advance of Information Technology (IT). In this study, the environment and the management status of the steel company that CRM implemented is analyzed. This study presents the system architecture which applies OLAP(on-line analytical processing), web technologies, and logistics service. Then this research presents a variety of effects and development direction in the future.

A strategic plan for an immediate situation must be present in a business enterprise to deal actively and efficiently with the demand environment of new customer. The purpose of this paper is to provide research about the manufacturing strategy situations of the Korean manufacturing company. And this paper is a part of Modeling on Manufacturing Strategy. We emphasizes the importance of dynamism and complexity on the competitive environment, and classify the manufacturing strategy by trade-off model, cumulative model, sandcone model, strategic fit model, and competitiveness model.

This Study will introduce the concept of ATP(Available To Promise) and CTP(Capable to Promise) through the existing study , the process analysis of CTP(Capable to Promise), the modeling of algorithm and the embodiment of system. This research considers the environment of using Job-Shop method. The CTP algorithm models espicially through using LPST(Latest Possible Start Time) and EPST(Earlist Possible Start Time) method. It is important part of executing CTP(Capable to Promise), The CTP(Capable to Promise) modeling and implementing system develops to system which is capable to implement in the various business environment through addational and continuous research.

Various numerical models that have been developed for marine environments and applied to coastal waters in USA were introduced briefly. Inter alia, with regard to an integrated monitoring and modeling system, the main features and outline of system, the system architecture for data management and representation system, and the incorporation of internet based technology were described. An example of application of an integrated system to coastal waters was also presented. The prospective research works to improve the capabilities and to advance the functionality of an integrated monitoring, modeling and management system were suggested to be the instrumentations for various monitoring parameters, the new development and/or advancement of various numerical models, the relevant internet based technologies. etc..

양액재배시 배지 및 양액종류의 차이가 백경채, 탑채, 상추, 쑥갓 및 잎들깨의 생육에 미치는 영향을 구명하고자 실시한 실험의 결과는 다음과 같다. 1. 전반적으로 순수담액처리구와 혼합상토의 생육이 크게 차이나지는 않았으나 순수담액처리구의 생육이 가장 양호하였고, 모래배지에서의 생육이 가장 저조하였다. 백경채, 탑채, 상추와 잎들깨의 생육은 순수담액의 산기양액처리구에서 가장 좋았으며 쑥갓의 경우 양액종류에 관계없이 순수담액처리구에서 생육이 양호하였다. 2. 엽록소의 상대적 함량은 처리간에 큰 차이가 없었다. 3. Vitamin C의 함량은 처리구간에 차이가 크지 않았으나 공시작물 공히 전반적으로 양액의 종류에 상관없이 혼합상토처리구가 가장 높았고, 모래배지가 가장 낮았다. 그러나 잎들깨에서는 모래배지와 순수담액배지간에 차이가 없었다.

It is suggested that magnetosonic waves (also known as equatorial noise) can scatter radiation belt electrons in the Earth’s magnetosphere. Therefore, it is important to understand the global distribution of these waves between the proton cyclotron frequency and the lower hybrid resonance frequency. In this study, we developed an empirical model for estimating the global distribution of magnetosonic wave amplitudes and wave normal angles. The model is based on the entire mission period (approximately 2012–2019) of observations of Van Allen Probes A and B as a function of the distance from the Earth (denoted by L*), magnetic local time (MLT), magnetic latitude (λ), and geomagnetic activity (denoted by the Kp index). In previous studies the wave distribution inside and outside the plasmasphere were separately investigated and modeled. Our model, on the other hand, identifies the wave distribution along with the ambient plasma environment—defined by the ratio of the plasma frequency (fpe) to the electron cyclotron frequency (fce)—without separately determining the wave distribution according to the plasmapause location. The model results show that, as Kp increases, the dayside wave amplitude in the equatorial region intensifies. It thereby propagates the intense region towards the wider MLT and inward to L* < 4. In contrast, the fpe/fce ratio decreases with increasing Kp for all regions. Nevertheless, the decreasing aspect differs between regions above and below L* = 4. This finding implies that the particle energy and pitch angle that magnetosonic waves can effectively scatter vary depending on the locations and geomagnetic activity. Our model agrees with the statistically observed wave distribution and ambient plasma environment with a coefficient of determination of > 0.9. The model is valid in all MLTs, 2 ≤ L* < 6, |λ| < 20°, and Kp ≤ 6.

In this study, to investigate an optimal configuration method for the modeling system, we performed an optimization experiment by controlling the types of compilers and libraries, and the number of CPU cores because it was important to provide reliable model data very quickly for the national air quality forecast. We were made up the optimization experiment of twelve according to compilers (PGI and Intel), MPIs (mvapich-2.0, mvapich-2.2, and mpich-3.2) and NetCDF (NetCDF-3.6.3 and NetCDF-4.1.3) and performed wall clock time measurement for the WRF and CMAQ models based on the built computing resources. In the result of the experiment according to the compiler and library type, the performance of the WRF (30 min 30 s) and CMAQ (47 min 22 s) was best when the combination of Intel complier, mavapich-2.0, and NetCDF-3.6.3 was applied. Additionally, in a result of optimization by the number of CPU cores, the WRF model was best performed with 140 cores (five calculation servers), and the CMAQ model with 120 cores ( five calculation servers). While the WRF model demonstrated obvious differences depending on the number of CPU cores rather than the types of compilers and libraries, CMAQ model demonstrated the biggest differences on the combination of compilers and libraries.

본 논문에서 3DARModeler 라는 증강현실 환경에서의 3D 모델링 시스템에 대해서 제시 한다. 이 시스템은 3D 객체(모델)를 만들기 위해 객체 호출, 텍스쳐 적용, 애니메이션, 광원추정, 그림자 등의 기능들이 포함된 간단한 3D Studio Max라고 볼 수 있다. 3DARModeler는 3D 모델을 만들기 위한 효과적이고 편리한 상호작용 방법들을 제시한다. 3DARModeler 시스템의 주사용자는 컴퓨터 그래픽, 모델링 기술에 관한 많은 지식을 갖추지 않은 비전문가들을 대상으로 한다. 사용자들은 기본 객체를 선택, 객체들의 속성 부여, 여러 객체들의 결합을 통하는 방법으로 사용자가 실세계에서 직접 모델링을 하는 것과 같이 간단하고 직관적인 방법의 모델링을 가능하도록 한다.

This paper describes a new method for indoor environment mapping and localization with stereo camera. For environmental modeling, we directly use the depth and color information in image pixels as visual features. Furthermore, only the depth and color information at horizontal centerline in image is used, where optical axis passes through. The usefulness of this method is that we can easily build a measure between modeling and sensing data only on the horizontal centerline. That is because vertical working volume between model and sensing data can be changed according to robot motion. Therefore, we can build a map about indoor environment as compact and efficient representation. Also, based on such nodes and sensing data, we suggest a method for estimating mobile robot positioning with random sampling stochastic algorithm. With basic real experiments, we show that the proposed method can be an effective visual navigation algorithm.

This paper presents URS (Ubiquitous Robotic Space) Modeling and service technique for the robotic security service while bridging between virtual space and physical space. First, this paper introduces a concept of virtual URS and responsive virtual URS. Second, this paper addresses modeling of URS which covers modeling of indoor geometry and environment sensor. Third, this paper describes virtual URS services including interactive virual-physical bridging service.