어촌뉴딜 300사업은 300개의 어촌과 어항을 대상으로 하는 복합개발사업으로 낙후된 시설 개선 및 지역특화 자원활용 등 전문 프로그램을 제공하는 사업이다. 본 연구에서는 어촌뉴딜 300사업의 선정평가 항목 별 가중치 결정을 위해 다기준 평가방법인 AHP로 전문 가 설문조사를 통한 분석을 수행하였다. 평가결과, 상위계층 평가항목은 개발여건 및 기본구상, 사업효과, 사업계획, 사업 시행 및 관리 순으로 중요도가 높게 나타났다. 사업효과 항목은 가이드라인에서 6점으로 낮은 배점이었지만, AHP 결과 15.57점의 배점이 도출되었다. 본 연구에서 도출된 항목별 가중치는 향후 어촌어항 개발사업 평가항목 배점 선정에 참조할 수 있을 것이다.

This study analyzed the allocation of the skipper’s attention during fishing operation in the wheelhouse of a Korean coastal composite fishing vessel by using video observation. To summarize the results, the ratio of lookout, radar and GPS monitoring, which is essential for prevention of collision at sea, was significantly lower than that of other fishing operation due to the attention concentration on the work place during hauling line. In order to reduce exposure to risk of collisions due to concentration of attention to certain tasks such as line hauling, it is necessary to develop an alert system that can notify the approach of other ships or obstruction throughout the ship using information from radar or the automatic identification system. In addition, the order of attention allocation to devices and facilities obtained in this study is expected to be used as basic data for device or facility layout based on the principle of usage frequency in designing wheelhouse for coastal composite fishing vessels in the future.

A scrapped fiber-reinforced plastic(FRP) fishing vessel causes many environmental problems, because technology development for recycling FRP vessel has not been adequately addressed. FRP is a main material for constructing a small coastal fishing vessel that is an object of reduction policy. Therefore, the FRP wastes derived a scrapped fishing vessel are increasing. In this study, I investigated an effective disposal process for FRP through the analysis of the actual conditions of scrapped FRP fishing vessel. The treatment processes of scrapped FRP fishing vessel are carried out with oil-removing, dismantling, intermediated processing(crushing), and then reclaiming follows burning in the final processing in Korea. However, in Japan, several recycling methods have been developed, for example, the incineration including thermal recovery, the use of cement-reclamation, and the use of asphalt concrete aggregate, because the method of reclaiming after incinerating which is generally used in Korea produces a toxic by-product such as dioxin.

This paper describes on the real-time monitoring of net setting and hauling process for fishing operations of Danish seine vessels in the southern waters of Korea as an application of a PC based ECDIS system. Tracking of fishing process was performed for the large scale Danish seine vessel of G/T 90 and 350 PS class using the fishing gear which the length of net, ground rope, head rope and sweep line including warp in both sides were 86m, 104m, 118m and 3,200m, respectively. Tracking information for net setting and hauling process was continuously recorded for 23 fishing operations performed on November and December, 2003. All measurement data, such as trawl position, heading, towing course and past track which was individually time stamped during data acquisition, was processed in real time on the ECDIS and displayed simultaneously on the ENC chart. The results indicated that after the separation of a marker buoy from Danish seiner, the averaged running speed of vessel and the averaged setting period while shooting the seine on the course of diamond shape to surround the fish school in the 23 fishing operations were 8.3 knots and 13.1 minutes, respectively. And with the maker buoy taken on board, the averaged running speed of vessel and the averaged towing period while closing the seine on the straight route was 1.0 knots and 47.0 minutes, respectively. After the closing stage of hand rope, the hand rope was towed by the averaged speed of 2.2 knots during the 13.0 minutes. The average area for route of diamond shape swept by sweep lines of the seine in 23 fishing grounds was 709,951.6m2. Further investigation is also planed to provide more quantitative tracking information and to achieve more effective surveillance and control of Danish seine vessels in EEZ fishing grounds.

This study was carried out to observe the underwater geometry of the anchovy boat seine by two fishing operation systems. One was a traditional operation system that used a fish detecting boat, another was a new operation system that used the same fishing gear with floats and sinkers in comparison with a fish detecting boat. Vertical opening of the fishing gear that used a casting net, working depth of each part of the fishing gear that used a new operation system was almost canstant, but was gradually shallow in a traditional operation system. Just before hauling net, working depth of each part of the fishing gear that used a new operation system was maintained stable, but was vertically unstable in a traditional operation system because as rear part of the fishing gear was risen up the upper layer. Just after hauling net, working depth of the fishing gear that used a new operation system was also maintained stable, and then anchovy school could be lead to bag net.

The north-west sea area of Cheju Island is where originate two layer current in the summer season. The case of the fishing operations in this sea area is almost impossible for normal expansion of the net gear for shooting net, and is happened to be frequent occasions for rise of tension suddenly in purseline by changes of the net shapes in the operation. Therefore, the safety of the operations is often obstructed by the above mentioned. In connection with the above, model experiments on the purse seine in the circulating water tank was carried out in comparison and analysis on the changes of tension in the pruseline by deformation of purse seine in the sea area of two layer current. THe results obtained are as follows;In the case of the required time for pursing of 20 minutes in the no current set, the increasing curve for tension of purseline can be expressed as:Y=0.0004x3+0.0098x2+0.3000x(r=0.9989)where Y is tension(metric tons) of a purseline, x is required time(minutes) for pursing. And, the maximum value of tension in this time was an increase of 31.3 percent at 15 minutes, and was a decrease of 30.3 percent at 30 minutes than that of 20 minutes.When the bottom margin of net is held on the position in velocity of 0.5 knot at three-eighths of net in the bottom current to the net height, the maximum tension of the required time for pursing of 30 minutes in tight set and loose set were decrease of 29.5 percent and 28.7 percent respectively than that of 20 minutes.The work load during the required time for pursing of 20 minutes were calculated 5.79×106 kgf·m in no current set, 7.89×106 kgf·m in tight set and 5.15×106 kgf·m in loose set, therefore it was an increase of 22.3 percent in tight set, and was a decrease of 11.1 percent in loose set than that of the no current set. Where tight set and loose set is a range of the bottom current with velocity of 0.5 knot at three-eighths of net to the net height.

선망어법의 어회과정에 있어서 어군행동에 관한 기초적인 연구를 목적으로 제주 근해에서 사용하고 있는 고등어 선망어구인 파워불록용 선망(Powetblock seine)과 앞으로 예상되는 단선조작에서의고등어 선망어구인 트리플레스용 선망(Triplex seine)의 두 가지 모형망을 1/180로 제작 하고 선망에 의해 포위된 어군의 망내행동과 양쪽 선단의 개구부를 통하여 도피하는 어군의 행동을 관찰 분석함과 동시에 망단의 개구부의 면적 및 장력변화 등을 해석하였으며, 그 결과는 다음과 같다. 1. 죔줄죄기 소요시간 20분일 때, 개구부로 도피하는 아군의 평균 유영속도는 Powerblcok seine에서 9.71cm/sec, Triplex seine에서 9.97cm/sec였다. 2.죔줄죄기 소요시간 20분중 좀줄을 50% 정도 감아들었을 때, 선망내의 어군은 Powerblock seine의 경우 I section 10%, II section방향으로 10% 유영하는 행동을 보였다. 3.죔줄죄기 소요시간 20분중 10분 경과했을 때, 전면 망단 개구부의 면적 감소율은 Powerblock seine이 63.5%, Triplex seine이 어군도피에 대한 수평적 서단능력이 높았따. 그리고, 좀줄에 걸리는 최대장력은 Powerblock seine이 약 8.1톤, Triplex seine이 8.3톤으로 나타 났는데, 양자의 차이는 그다지 크지 않았다.