The increasing accumulation of spent nuclear fuel has raised interest in High-Level Waste (HLW) repositories. For example, Sweden is under construction of the KBS-3 repository. To ensure the safety of such HLW repository, various countries have been developing assessment models. In the Republic of Korea, the Korea Atomic Energy Research Institute has been developing on the AKRS model. However, traditional safety assessment models have not considered the fracture growth in the far-field host rock as a function of time. As repository safety assessments guarantee safety for million years, sustained stress naturally leads to the progressive growth of fractures as time goes on. Therefore, it becomes essential to account for fracture growth in the surrounding host rock. To address this, our study proposes a new coupling scheme between the Fracture growth model and the radionuclide transport model. That coupling scheme consists of the Cubic Law model as a fracture growth function and the GoldSim code which is a commercial software for radionuclide transport calculations. The model that adopting such fracture growth functions showed an increase of up to 15% in the release of radionuclide compared to traditional assessment models. our observations indicated that crack growth as a function of time led to an increase in hydraulic conductivity that allowed more radionuclide transport. Notably, these findings show the significance of adopting fracture growth models as a critical element in evaluating the safety of nuclear waste repositories.

The high-level nuclear waste (HLW) repository disposes of high-level nuclear waste at a depth of 500 m to 1,000 m underground. Structural health monitoring must be accompanied by the complex environmental conditions of high temperature, high humidity, radiation, and mechanical stress. A thermocouple for measuring temperature, total stress meter and pore pressure meter for measuring stress and water pressure, relative hygrometer and electrical resistivity sensor (TDR or SUS) for measuring humidity, accelerometer for measuring crack signals, and strain gauge for measuring displacement are used. For safety, after disposing of HLW in the HLW repository, access to the disposal tunnel gets blocked, making it impossible to replace or remove the monitoring sensors. So, it is necessary to evaluate the effect of the HLW repository’s environmental conditions on the monitoring sensors and enhance their durability through quantitative life evaluation and shielding. Before evaluating the life of accelerometers and strain gauges used in the HLW repository, an experimental study is conducted to determine failure modes and failure mechanisms under radiation conditions, which are unique environmental conditions of the HLW repository.

The high-level nuclear waste (HLW) repository is a 500-1,000 m deep underground structure to dispose high-level nuclear waste. The waste has a very long half-time and is exposed to a number of stresses, including high temperatures, high humidity, high pressure These stresses cause the structure to deteriorate and create cracks. Therefore, structural health monitoring with monitoring sensors is required for safety. However, sensors could also fail due to the stresses, especially high temperature. Given that the sensors are installed in the bentonite buffer and the backfill tunnel, it is impossible to replace them if they fail. That’s why it is necessary to assess the sensors’ durability under the repository’s environmental conditions before installing them. Accelerated life test (ALT) can be used to assess durability or life of the sensors, and it is important to obtain the same failure mode for reliability tests including ALT. Before conducting the test, the proper stress level must be designed first to get reliable data in a short time. After that, acceleration of life reduction with increasing temperature and temperature-life model should be determined with some statistical methods. In this study, a methodology for designing stress levels and predicting the life of the sensor were described.

본 연구의 목적은 고준위폐기물 처분기술 개발과 관련하여 현장실증 연구를 위해 사용될 공학규모 이상의 균질 완충재 블록 을 제작하기 위한 새로운 방법론을 제시하는 것이다. 이와 관련하여 플롯팅 다이(floating die) 방식의 프레스 재하 및 냉간 등방압프레스(CIP; Cold Isostatic Press) 기법을 국내 최초로 완충재 제작에 적용하였다. 또한 소요 밀도기준을 충족하는 완충재 블록을 생산하기 위한 최적의 제작조건(프레스 및 CIP의 소요 압력)과 현장 적용성을 분석하였다. 상기 기법의 적용을 통해 완충재 블록 내 밀도분포 편차가 현저히 감소하였으며, 이와 동시에 평균 건조밀도가 소폭 상승하고 약 5%의 크기가 감소하였다. 또한 CIP 적용을 통해 응력이완(stress release) 현상이 감소하고, 이로 인해 시간 경과에 따른 표면균열 발생이 현저히 저감됨을 시험제작을 통해 확인하였다. 본 연구에서 제시된 방법론은 공학규모 이상의 균질한 완충재 블럭을 성형할 수 있으며, 또한 이는 선진핵주기 고준위폐기물처분시스템(AKRS; Advanced Korea Reference Disposal System of HLW)의 완충재 소요 밀도기준을 충족하는 것으로 분석되었다.

본 연구에서는 벤토나이트의 변질을 모사하기 위해 TOUGHREACT를 이용하여 열-수리-화학적 개념 모델링을 수행하였다. 모델링 결과 벤토나이트의 포화도는 지속적으로 증가하여 약 10 년 후에 포화상태에 도달하였다. 또한 온도는 급격히 증가 하여 0.5 년 이후에는 구리관으로부터 거리에 따라 일정한 온도 구배가 유지되었다. 이러한 열-수리 조건 변화에 따라 화학 적으로는 경석고와 방해석의 변질이 주로 발생하였다. 경석고와 방해석은 지하수가 유입됨에 따라 지속적으로 용해되었으 나, 온도가 높은 구리관 인근에서는 침전하는 경향을 보여주었다. 또한 경석고와 방해석의 침전으로 인해 구리관 인근의 공 극률과 투과도가 감소하였다. 확산 상수 변화에 대한 모델링 결과 경석고와 방해석의 변질은 확산 상수에 매우 민감하였으 며, 이는 결과적으로 수리적 특성인 공극률과 투과도에 영향을 미치고 있었다. 본 연구는 고준위 방사성폐기물 처분장 안전 성 연구에 기초적인 자료를 제공해 줄 것으로 판단된다.