Synthesis of extremely competent materials is of great interest in addressing the energy storage concerns. Manganese oxide nanowires ( MnO2 NWs) are prepared in situ with multiwall carbon nanotubes (MWCNT) and graphene oxide (GO) using a simple and effective hydrothermal method. Powder XRD, Raman and XPS analysis are utilized to examine the structural characteristics and chemical state of composites. The initial specific discharge capacity of pure MnO2 NWs, MnO2 NWs/ MWCNT and MnO2 NWs/rGO composites are 1225, 1589 and 1685 mAh/g, respectively. The MnO2 NWs/MWCNT and MnO2 NWs/rGO composites showed stable behavior with a specific capacity of 957 and 1108 mAh/g, respectively, after 60 cycles. Moreover, MnO2 NWs/rGO composite sustained a specific capacity of 784 mAh/g, even after 250 cycles at a current density of 1 A/g showing outstanding cycling stability.

N-doping content and configurations have a significant effect on the electrochemical performance of carbon anodes. Herein, we proposed a simple method to synthesize highly N self-doped chitosan-derived carbon with controllable N-doping types by introducing 2ZnCO3 ·3Zn(OH)2 into the precursor. The as-synthesized NC-CS/2ZnCO3·3Zn(OH)2 electrode exhibited more than twice the reversible capacity (518 mAh g− 1 after 100 cycles at 200 mA g− 1) compared to the NC-CS electrode, superior rate performance and outstanding cycling stability. The remarkable improvement should be mainly attributed to the increase of N-doping content (particularly the pyrrolic-N content), which provided more active sites and favored Li+ diffusion kinetics. This study develops a cost-effective and facile synthesis route to fabricate high-performance N self-doped carbon with tunable doping sites for rechargeable battery applications.

Highly safe lithium-ion batteries (LIBs) are required for large-scale applications such as electrical vehicles and energy storage systems. A highly stable cathode is essential for the development of safe LIBs. LiFePO4 is one of the most stable cathodes because of its stable structure and strong bonding between P and O. However, it has a lower energy density than lithium transition metal oxides. To investigate the high energy density of phosphate materials, vanadium phosphates were investigated. Vanadium enables multiple redox reactions as well as high redox potentials. LiVPO4O has two redox reactions (V5+/V4+/V3+) but low electrochemical activity. In this study, LiVPO4O is doped with fluorine to improve its electrochemical activity and increase its operational redox potential. With increasing fluorine content in LiVPO4O1-xFx, the local vanadium structure changed as the vanadium oxidation state changed. In addition, the operating potential increased with increasing fluorine content. Thus, it was confirmed that fluorine doping leads to a strong inductive effect and high operating voltage, which helps improve the energy density of the cathode materials.

전고체 전지는 전기 자동차의 안정성을 향상시키기 위해 기존의 리튬 이온 전지를 대체할 주요 후보로 간주되고 있 습니다. 그러나 전고체 전지에 사용되는 황화물계 고체 전해질은 산화 환원 안정성이 부족하며 양극복합전극과 표면 에서 부반응을 이르켜 문제를 야기시킵니다. 때문에 양극 표면 코팅법이 제안되었고 이는 충방전 사이클 안정성 및 속도 특성의 개선에 유용한 효과를 나타낼 수 있습니다. 본 논문에서는 결정학적 분석을 통하여 신규 Li-Zr-O 조성 탐색을 하였고, 다양한 양극 소재 코팅소재 후보군 중 리튬 이온 전도체인 Li6Zr2O7 구조가 매우 유망하다는 연구 결 과를 확인했습니다. 본 논문은 기존에 사용되는 LiNbO3, Li4Ti5O12가 아닌 새로운 다양한 구조 및 조성의 양극 코팅 소 재개발에 대한 필요성 및 가능성을 시사합니다.

In this study, an experiment is performed to recover the Li in Li2CO3 phase from the cathode active material NMC (LiNiCoMnO2) in waste lithium ion batteries. Firstly, carbonation is performed to convert the LiNiO, LiCoO, and Li2MnO3 phases within the powder to Li2CO3 and NiO, CoO, and MnO. The carbonation for phase separation proceeds at a temperature range of 600oC~800oC in a CO2 gas (300 cc/min) atmosphere. At 600~700oC, Li2CO3 and NiO, CoO, and MnO are not completely separated, while Li and other metallic compounds remain. At 800 oC, we can confirm that LiNiO, LiCoO, and Li2MnO3 phases are separated into Li2CO3 and NiO, CoO, and MnO phases. After completing the phase separation, by using the solubility difference of Li2CO3 and NiO, CoO, and MnO, we set the ratio of solution (distilled water) to powder after carbonation as 30:1. Subsequently, water leaching is carried out. Then, the Li2CO3 within the solution melts and concentrates, while NiO, MnO, and CoO phases remain after filtering. Thus, Li2CO3 can be recovered.

Silicon alloys are considered promising anode active materials to replace Li-ion batteries by graphite powder, because they have a relatively high capacity of up to 4200 mAh/g, and are environmentally friendly and inexpensive ECO-materials. However, its poor charge/discharge properties, induced by cracking during cycles, constitute their most serious problem as anode electrode. In order to solve these problems, Si-Ge-Al alloys with porous structure are designed as anode alloy powders, to improve cycling stability. The alloys are melt-spun to obtain the rapidly solidified ribbons, and then ball-milled to make fine powders. The powders are etched using 1 M HCl solution, which gives the powders a porous structure by removing the element Al. Subsequently, in this study, the microstructures and the characteristics of the etched powders are evaluated for application as anode materials. As a result, the etched porous powder shows better electrochemical properties than as-milled Si-Ge-Al powder.

For the fabrication of the Si negative electrode in Li-ion batteries (LIBs) containing the cross-linking polymer binder, in this work, the urethane acrylate (UA) oligomer was synthesized via a simple synthetic process. The cross-linked poly(urethane acrylate) (CPUA)/carbone black (CB)/Si composite (CPUA/CB/Si composite) was fabricated through reactions between their reactive vinyl segments in the UA oligomer. Interestingly, the CPUA/CB/Si composite showed better cycle performance than the poly(vinylidene fluoride) (PVdF)/CB/Si composite (PVdF/CB/Si composite) and the polyurethane (PU)/CB/Si composite (PU/CB/Si composite). The CPUA/CB/Si composite had the best lithiation of about 2586 mAh g-1. The UA oligomer showed a good compatibility with the electrode materials and current collector after and before a curing process.

SnO2-CoO/carbon-coated CoO core/shell nanowire composites were synthesized by using electrospinning and hydrothermal methods. In order to obtain SnO2-CoO/carbon-coated CoO core/shell nanowire composites, SnO2-Co3O4 nanowire composites and SnO2-Co3O4/polygonal Co3O4 core/shell nanowire composites are also synthesized. To demonstrate their structural, chemical bonding, and morphological properties, field-emission scanning electron microscopy, transmission electron microscopy, X-ray diffraction, and X-ray photoelectron spectroscopy were carried out. These results indicated that the morphologies and structures of the samples were changed from SnO2-Co3O4 nanowires having cylindrical structures to SnO2-Co3O4/Co3O4 core/shell nanowires having polygonal structures after a hydrothermal process. At last, SnO2-CoO/carbon-coated CoO core/shell nanowire composites having irregular and high surface area are formed after carbon coating using a polypyrrole (PPy). Also, there occur phases transformation of cobalt phases from Co3O4 to CoO during carbon coating using a PPy under a argon atmosphere.

Li metal is accepted as a good counter electrode for electrochemical impedance spectroscopy (EIS) as the active material in Li-ion and Li-ion polymer batteries. We examined the existence of signal noise from a Li-metal counter quantitatively as a preliminary study. We suggest an electrochemical cell with one switchable electrode to obtain the exact impedance signal of active materials. To verify the effectiveness of the switchable electrode, EIS measurements of the solid electrolyte interphase (SEI) before severe Li+ intercalation to SFG6 graphite (at 〉 ca. 0.25 V vs. Li/Li+) were taken. As a result, the EIS spectra without the signal of Li metal were obtained and analyzed successfully for the following parameters i) Li+ conduction in the electrolyte, ii) the geometric resistance and constant phase element of the electrode (insensitive to the voltage), iii) the interfacial behavior of the SEI related to the Li+ transfer and residence throughout the near-surface (sensitive to voltage), and iv) the term reflecting the differential limiting capacitance of Li+ in the graphite lattice.

The various expanded graphites (EGs) was prepared and applied as anode material for high power Li-ion secondary battery (LIB). By changing the processing conditions of EG, a series of EG with different structure were produced, showing the changed electrochemical properties. The charge-discharge test showed that the initial reversible capacity of EG anodes prepared at the suitable conditions was over 400 mAh/g and the charge capacity at 5 C-rate was 83.2 mAh/g. These values demonstrated the much improved electrochemical properties as compared with those for the graphite anode of 360 mAh/g and 19.4 mAh/g, respectively, showing the possibility of EG anode materials for high power LIB.

고분자 분리막 기술은 리튬이온전지나 리튬폴리머전지와 같은 리튬이차전지의 성능을 좌우할 정도로 중요한 요소기술이다. 본 논문에서는 지금까지 개발되어 사용되고 있는 다양한 고분자 분리막의 특징 및 기술동향에 대하여 기술하고, 보다 적합한 분리막의 요건을 만족시키기 위한 고분자물질의 판단기준을, 특히 안정성 측면에서 살펴보고자 한다. 또한 실제 리튬이온전지용 분리막을 제조하기 위한 제조공정을 통해 고분자재질의 특징과 관련한 적용성의 여부를 판단코자 하며, 제조된 분리막에 대한 실용화 가능성을 판단하기 위한 분리막의 물리적 요구치 및 측정법에 대하여 기술코자 한다.