In this study, numerical modeling on the gas flow and off-gases in the low temperature carbonization furnace for carbon fiber was analyzed. The furnace was designed for testing carbonization process of carbon fibers made from various precursors. Nitrogen gas was used as a working gas and it was treated as an incompressible ideal gas. Three-dimensional computational fluid dynamics for steady state turbulent flow was used to analyze flow pattern and temperature field in the furnace. The off-gas mass fraction and cumulative emission gas of species were incorporated into the CFD analyses by using the user defined function(UDF). As a results, during the carbonization process, the emission of CO2 was the dominant among the off-gases, and tow moving made the flow in the furnace be uniform.

In this study, gas flow pattern and temperature distribution in a laboratory scale low temperature furnace for carbonization were numerically analyzed. The furnace was designed for testing carbonization process of carbon fibers made from polyimide(PI) precursor. Nitrogen gas was used as a working gas and it was treated as an ideal gas. Three-dimensional computational fluid dynamics analysis for steady state turbulent flow was used to analyze flow pattern and temperature field in the furnace. The results showed that more uniform velocity profile and axisymmetric temperature distribution could be obtained by varying mass flow rate at the inlets.

To the goal of improving the early compressive strength of the mortar including Ground granulated blast furnace slag under low-temperature environment, Industrial byproducts including SiO2 and Al2O3 was fired and than 7% of it was added into Ground granulated blast furnace slag. By checking compressive strength and activity index from different mixing rate, in spite of low strength development than OPC 100%, when using firing powder, the expectation of increasing strength by curing time was affirmative

MILD (Moderate and Intense Low oxygen Dilution) combustion using high temperature exhaust gas recirculation is applied to solid fuels of dried sewage sludge and pulverized coal combustion to investigate the effect of reduction of NOx emission in a pilot scale combustor. High temperature exhaust gas recirculation is accomplished by entraining high temperature exhaust gas to air jets at just exit of the combustion chamber without a heat exchanger. High temperature exhaust gas recirculation makes the solid fuel flame stable and extremely uniform color and uniform temperature distribution. NOx concentration at the combustor exit was 62% and 40% less in the high temperature exhaust recirculation MILD combustion compared with the conventional combustion using air jet only for sewage sludge and pulverized coal respectively.