The spent nuclear fuel, combusted and released in the nuclear power plant, is stored in the spent fuel pool (SFP) located in the fuel buildings interconnected with the reactors. In Korea, spent fuel has been stored exclusively in SFPs, prompting initiatives to expand storage capacity by either installing additional SFPs or replacing them with high-density spent fuel storage racks. The installation of these fuel racks necessitates obtaining a regulatory license contingent upon ensuring safe fuel handling and storage systems. Regulatory agencies mandate the formulation of various postulated accident scenarios and assessments covering criticality, shielding, thermal behavior, and structural integrity to ensure safe fuel handling and storage systems. This study describes an evaluation method for assessing the structural damage to storage racks resulting from fuel dropping as a part of the functional safety evaluation of these racks. A scenario was envisaged wherein fuel was dropped onto the base plates of the upper and lower sections of the storage racks, and the impact load was analyzed using the ABAQUS/Explicit program. The evaluation results revealed localized plastic deformation but affirmed the structural integrity and safety of the storage racks.

Because most spent nuclear fuel storage casks have been designed for low burnup fuel, a safety-significant high burnup dry storage cask must be developed for nuclear facilities in Korea to store the increasing high burnup and damaged fuels. More than 20% of fuels generated by PWRs comprise high burnup fuels. This study conducted a structural safety evaluation of the preliminary designs for a high burnup storage cask with 21 spent nuclear fuels and evaluated feasible loading conditions under normal, off-normal, and accident conditions. Two types of metal and concrete storage casks were used in the evaluation. Structural integrity was assessed by comparing load combinations and stress intensity limits under each condition. Evaluation results showed that the storage cask had secured structural integrity as it satisfied the stress intensity limit under normal, off-normal, and accident conditions. These results can be used as baseline data for the detailed design of high burnup storage casks.

The aim of this study is to ensure the structural integrity of a canister to be used in a dry storage system currently being developed in Korea. Based on burnup and cooling periods, the canister is designed with 24 bundles of spent nuclear fuel stored inside it. It is a cylindrical structure with a height of 4,890 mm, an internal diameter of 1,708 mm, and an inner length of 4,590 mm. The canister lid is fixed with multiple seals and welds to maintain its confinement boundary to prevent the leakage of radioactive waste. The canister is evaluated under different loads that may be generated under normal, off-normal, and accident conditions, and combinations of these loads are compared against the allowable stress thresholds to assess its structural integrity in accordance with NUREG-2215. The evaluation result shows that the stress intensities applied on the canister under normal, off-normal, and accident conditions are below the allowable stress thresholds, thus confirming its structural integrity.

A transfer cask serves as the container for transporting and handling canisters loaded with spent nuclear fuels from light water reactors. This study focuses on a cylindrical transfer cask, standing at 5,300 mm with an external diameter of 2,170 mm, featuring impact limiters on the top and bottom sides. The base of the cask body has an openable/closable lid for loading canisters with storage modules. The transfer cask houses a canister containing spent nuclear fuels from lightweight reactors, serving as the confinement boundary while the cask itself lacks the confinement structure. The objective of this study was to conduct a structural analysis evaluation of the transfer cask, currently under development in Korea, ensuring its safety. This evaluation encompasses analyses of loads under normal, off-normal, and accident conditions, adhering to NUREG-2215. Structural integrity was assessed by comparing combined results for each load against stress limits. The results confirm that the transfer cask meets stress limits across normal, off-normal, and accident conditions, establishing its structural safety.

While many countries consider direct disposal of the spent nuclear fuels, they need to consider long-term disposal scenarios with severe accidents such as the contact between underwater and the spent nuclear fuel due to large defect of the canister. Radionuclides releases rapidly with contacting water or slowly with dissolution of UO2 matrix. The former is known as the ‘Instant Release’, and the latter is ‘Congruential Release’. Even though the instant release fractions (IRF) are much smaller than the congruential ones, IRF has to be treated carefully due to the fact that the instant releases lead to much larger value of the exposure dose rates than the congruential ones which proceed very slowly. It is known that the exposure dose rates by the instant releases are ~25 times larger than the one by the congruent release. The radionuclides from UO2 matrix migrate to the grain boundary, make bubbles, and make tunnels, which leads to instant releases of some radionuclides. The radionuclides in the gap between UO2 pellet and cladding can be also instantly released. In addition, the radionuclides in the crud are instantly released. But in this paper, nuclides from the crud are not regarded, due to the lack of the leaching data. Meanwhile, there’re some nuclides that released from the construction materials like the cladding, the Rod Cluster Control Assembly (RCCA), or the other metal parts. In this work, IRF values for major IRF nuclides such as Cs, I, Cl, Se for the reference PWR spent fuels of South Korea were evaluated based on the rationale from literatures’ review. In particular, these evaluations were done as the function of fission gas release (FGR), average discharge burnup, and fuel dimensions. In addition, the values of IRF for the other nuclides were also suggested based on the other institutes.

In case of Korea, unlike overseas nuclear power plants, adjacent units are located in permanently stopped nuclear power plants. Radioactive substances from airborne and liquid effluents are released into the environment from the NPP, and the radioactivity of the released substances must be reported to the regulatory authorities. Radioactive effluents are released into the environment not only in operation but also after permanent shutdown. Due to domestic conditions in which multiple units exist on the same site, it is necessary to consider radioactive effluents generated after permanent shutdown of NPPs. In particular, liquid effluent may have an increased tritium concentration due to draining the spent fuel pool. This paper summarizes the annual liquid emissions of PWR power plants that have been permanently shut down. The data was obtained from the Nuclear Regulatory Commission’s (NRC) annual radioactive effluent release report, which provides information on the annual emissions power plants into the environment. The liquid emissions of each plant were organized into an annual table, providing an overview of the amount of liquid released by each plant. This study aims to raise awareness about the potential environmental impact of permanently shut down nuclear power plants and the need for proper management of their liquid emissions. The findings of this study can used by operator, policymakers, and other stakeholders to make informed decisions regarding the decommissioning and management of nuclear power plants.

The treatment of waste generated during operation as a part of preparation for decommissioning is coming to the fore as a pending issue. Non-fuel waste stored in the spent fuel pool (SFP) of PWRs in Korea includes Dummy fuel, damaged fuel rod storage container, reactor vessel specimen cask, spent in-core instrumentation, spent control element assemblies, spent neutron source assemblies, burnable poison rods, etc. In order to treat such waste, it is necessary to classify radioactive waste level and analyze kinds of nuclide in accordance with legal requirements. In order to solve the problem, the items that KHNP-CRI is trying to conduct like followings. First, KHNP-CRI will identify the current status of non-fuel waste stored in the SFP of all domestic nuclear power plants. In order to consider the treatment of non-fuel waste, it is essential to know what kind of items and how many items are stored in the SFP. Second, to identify the dimension and characteristics of non-fuel waste stored in the SFP would be conducted. The configuration of non-fuel waste is important information to handle them. Third, the way to handle non-fuel waste would be deduced including analysis of their dimension, whether the equipment should be developed to handle each kind of non-fuel waste or not, how to transport them. In order to classify radioactive waste level and analyze the nuclide for the non-fuel waste, handling tools and the cask to transport them into the facility which nuclide analysis is able to be performed would be required. Fourth, the nuclide analysis technology would be identified. Also, domestic holding technology would be identified and which technology should be developed to classify the radioactive waste level for the non-fuel waste would be deduced. This preliminary study will provide KHNP-CRI with the insight for the nuclide analysis technology and future work which is following action for the non-fuel waste. Based on the result of above preliminary study, the feasibility of the research for the treatment of non-fuel waste would be evaluated and research plan would be established. In conclusion, the treatment of non-fuel waste stored in the spent fuel pool of domestic PWR should be considered to prepare the decommissioning. KHNP-CRI will identify the quantity, the dimension and kinds of non-fuel waste in the SFP of domestic PWR. Also, the various nuclide analysis technology would be identified and the technology which should be developed would be defined through this preliminary study.

In order to use nuclear energy stably, high level radioactive waste including spent nuclear fuel that is inevitably discharged from nuclear power plants after electricity generation must be managed safely and isolated from the human living area for a long period of time. In consideration of the accumulated amount of spent nuclear fuel anticipated according to the national policy for HLW management, the area required for the deep geological repository facility is expected to be very large. Therefore, it is essential to conduct various studies to optimize the area required for the disposal of spent nuclear fuel in cases where the nationally available land is extremely limited, such as in Korea. In this study, as part of such research, the strategies and the requirements for the preliminary design of a high efficiency repository concept of spent nuclear fuel were established. For PWR spent nuclear fuel, seven assemblies of spent nuclear fuel can be accommodated in a disposal canister, and high burnup of spent nuclear fuel was taken into consideration, and the source terms such as the amount and time of discharge and disposal were based on the 2nd national basic plan. By evaluating the characteristics, the amount of decay heat that can be accommodated in the disposal canister was optimized through the combination of seven assemblies of spent nuclear fuel. The cooling period of the radiation source for the safety assessment of the repository system was set at 55 years, and the operation of the repository would start from 2070 and then the disposal schedule would be conducted according to the disposal scenario based on the national basic plan. With these disposal strategies described above, the main requirements for setting up the conceptual design of the high efficiency repository system to be carried out in this study were described below. • A combination of seven spent nuclear fuels with high heat and spent nuclear fuels with low heat was loaded into a disposal canister, and the thermal limit per disposal canister was 1,600 W. • In order to maintain the long-term performance of the repository, the maximum temperature design limit in the buffer material was set to 130°C. • In the deep disposal environment, the safety factor [yield strength/maximum stress] required to maintain the structural stability of the disposal canister should be maintained at 2.0 or higher so that integrity of the canister can be maintained even under long-term hydrostatic pressure and buffer swelling pressure in the deep disposal environment. • The repository should have a maximum exposure dose of 10 mSv/yr or less, which is the legal limit in case of a single event such as an earthquake, and the risk level considering natural phenomena and human intrusion, which is less than the legal limit of 10-6/yr. These strategies and requirements can be used to develop the high-efficiency geological disposal concept for spent nuclear fuels as an alternative disposal concept.

Spent nuclear fuel (SNF) characterization is important in terms of nuclear safety and safeguards. Regardless of whether SNF is waste or energy resource, the International Atomic Energy Agency (IAEA) Specific Safety Guide-15 states that the storage requirements of SNF comply with IAEA General Safety Requirement Part 5 (GSR Part 5) for predisposal management of radioactive waste. GSR Part 5 requires a classifying and characterizing of radioactive waste at various steps of predisposal management. Accordingly, SNF fuel should be stored/handled as accurately characterized in the storage stage before permanent disposal. Appropriate characterization methods must exist to meet the above requirements. The characterization of SNF is basically performed through destructive analysis/non-destructive analysis in addition to the calculation based on the reactor operation history. Burnup, Initial enrichment, and Cooling time (BIC) are the primary identification targets for SNF fuel characterization, and the analysis mainly uses the correlation identified between the BIC set and the other SNF characteristics (e.g., Burnup - neutron emission rate) for characterizing. So further identification of the correlation among SNF characteristics will be the basis for proposing a new analysis method. Therefore, we aimed to simulate a SNF assembly with varying burnup, initial enrichment, and cooling time, then correlate other SNF properties with BIC sets, and identify correlations available for SNF characterization. In this study, the ‘CE 16×16’ type assembly was simulated using the SCALEORIGAMI code by changing the BIC set, and decay heat, radiation emission characteristics, and nuclide inventory of the assembly were calculated. After that, it was analyzed how these characteristics change according to the change in the BIC set. This study is expected to be the basic data for proposing new method for characterizing the SNF assembly of PWR.

Reliable evaluation of radioactivity inventory for the nuclear power plant components and residual materials is very important for decontamination and decommissioning. This can make it possible to define optimum dismantling approaches, to determine radioactive waste management strategies, and to estimate the project costs reasonably. To calculate radioactivity of the nuclear power plant structure, various information such as interest nuclide, cross-section, decay constant, irradiation time, neutron flux, and so on is required. Especially irradiation time and neutron flux level are very changeable due to cycle specific fuel loading pattern, the plant overhaul, cycle length. However most of the radioactivity calculations have generally been performed assuming one representative or average neutron flux during the lifetime of the nuclear power plant. This assumption may include excessive conservatism because the radioactivity level has the characteristics of saturation and decay. Therefore, considering these variables as realistically as possible could prevent overestimation. In order to perform realistic radioactivity calculation, we developed monthly relative power contribution factor applying plant-specific operation history and cycle-specific neutron flux. The factors were applied to the radioactivity calculation. The calculation results ware compared with measured values of the neutron monitors that were actually installed and withdrawn from the nuclear power plant. As a result of the comparisons, there are good agreements between the calculated values and measured values. These accurate calculation results of radioactivity could contribute to the establishment of radioactive waste dismantling strategies, the classification of radioactive waste, and the deposit of disposal costs for safe and reasonable decommissioning of the nuclear power plant.

Recently, the deep geological disposal system isolating a spent nuclear fuel (SNF) is considered a disposal method of high-level radioactive waste for the safety of humans or the natural environment. The one of important requirements for maintaining the thermal stability of these systems is that the temperature of the buffer does not exceed 100°C even though the decay heat is emitted from highlevel radioactive wastes loaded in the disposal container. In 2007, a deep geological disposal system based on the Swedish disposal concept was developed for the SNF in Korea. To respond to the development process, the thermal stability of the deep geological disposal system developed for the disposal of domestic pressurized light water reactor (PWR) SNFs with discharged burn-up of 55 GWD/MTU was evaluated in 2019. The thing is that the recent fuel activity is pursuing to operate further high burn-up fuel conditions, and it leads to emergency core cooling system (ECCS) revision for extending the license for up to 60 or more than 60 GWD/MTU in the world. In this regard, this study evaluates numerically the thermal stability of the deep geological disposal system for the high burn-up PWR SNF having large decay heat compared to previous conditions for two different length disposal containers classified according to the length of PWR SNFs discharged from domestic nuclear power plants. A finite element analysis using a computational program was used to evaluate the thermal design requirements. Results show that both types of disposal containers would increase the temperature which reduces or fails to meet the safety margin of the disposal system. This study suggests that the design of the previous disposal system is needed to be further developed for the high burn-up PWR SNF which would be used in future nuclear power plant systems.

Several countries, including Korea, are considering the direct disposal of spent nuclear fuels. The radiological safety assessment results published after a geological repository closure indicate that the instant release is the main radiation source rather than the congruent release. Three Safety Case reports recently published were reviewed and the IRF values of seven long-lived radionuclides, including relevant experimental results, were compared. According to the literature review, the IRF values of both the CANDU and low burnup PWR spent fuel have been experimentally measured and used reasonably. In particular, the IRF values of volatile long-lived nuclides, such as 129I and 135Cs, were estimated from the FGR value. Because experimental leaching data regarding high burnup spent nuclear fuels are extremely scarce, a mathematical modelling approach proposed by Johnson and McGinnes was successfully applied to the domestic high burnup PWR spent nuclear fuel to derive the IRF values of iodine and cesium. The best estimate of the IRF was 5.5% at a discharge burnup of 55 GWd tHM−1.

Detailed temperature distributions of the spent fuel are required to evaluate the long-term integrity of the dry storage system. In this study, a subchannel analysis method was established to obtain the detailed temperatures of a spent fuel using the COBRA-SFS code. The SAHTT (Single Assembly Heat Transfer Test) model was selected as the subchannel analysis. It was developed at the PNL to investigate heat transfer characteristics of spent PWR fuel under dry storage conditions. The SAHTT has a 15×15 rod array with simulated rods 0.42 in. (10.7 mm) in diameter. Control rod thimbles were modeled with unheated rods. The COBRA-SFS input consists a detailed subchannel model with 256 subchannels, 225 rods, and 8 slab nodes. The heat generation rate was axially uniform with total power of 1.0 kW. Subchannel analyses were performed for the vertical orientation under three different backfills of air, helium, and vacuum. For the vacuum backfill, the peak temperature was the highest and temperature gradients the sharpest only due to the radiation heat transfer effect. For the helium backfill, peak temperature was lowest and the axial profiles flattest due to the higher conductivity and lower density of helium. Subchannel analyses were also performed to evaluate the effect of thermal parameters such as surface emissivity, convective heat transfer coefficients, and flow resistance coefficients on the PCT (Peak Cladding Temperature). The PCT was affected by the emissivity of the fuel rod and the basket, and in particular, the basket emissivity had a greater effect. The PCT was affected by the Nusselt number, but the range of the Nusselt number is around 3.66. Therefore, the effect of the Nusselt number on the PCT will not be significant. As a result of the analysis according to the flow resistance coefficients, the PCT was affected by the wall friction factor, but the loss coefficients from the space grid had little effect. Subchannel technique obtained from this work can be used to predict the detailed temperature distributions of spent fuel assembly.

The manufactured nuclear fuel assembly is loaded into the nuclear reactor after the core design, and is finally discharged to the wet storage pool after depletion for 3 cycles. The discharged spent nuclear fuel is transported and stored in a dry storage system at the on-site of the nuclear power plant, which is cooled by natural convection, and undergoes final disposal or reprocessing through an intermediate dry storage facility. In this series of processes, the characteristics of the final product, the spent fuel, vary depending on the environmental conditions, so it is essential to manage each history data to verify the long-term integrity of the spent nuclear fuel. In this paper, safety information on spent nuclear fuel is described in order to establish technical requirements that should be considered in each stage of storage, transport, reprocessing, and disposal of spent nuclear fuel. Comprehensive safety information on spent nuclear fuel is basically calculated from basic information that considers characteristic information that can be obtained through the manufacture and design of nuclear fuel assemblies, operation history in a nuclear reactor, and location history in a wet storage pool. It can be divided into secondary production information (SF Burnup, Nuclide Inventory, etc.) and tertiary integrity-related information obtained through cladding inspection during spent fuel storage. KHNP produces this multi-layered information according to the production stage and manages it through the comprehensive management system of the spent nuclear fuel, and safety information with some errors is not only improved through re-verification but also continuously updated. In this paper, the spent nuclear fuel safety information was derived based on various information calculated in the entire process of being discharged and managed in a wet storage pool, including new fuel manufacturing information and depletion history. Such safety information will be used as basic data for long-term safe management of spent nuclear fuel, and will be continuously produced and managed. In the future, additional discussions will be held on the safety information of the spent nuclear fuel through consultation with KORAD and regulatory agencies.