The radionuclide management process is a conditioning technology to reduce the burden of spent fuel management, and refers to a process that can separate and recover radionuclides having similar properties from spent fuels. In particular, through the radionuclide management process, high heat- emitting, high mobility, and high toxicity radionuclides, which have a significant impact on the performance of disposal system, are separated and managed. The performance of disposal system is closely related to properties (decay heat and radioactivity) of radioactive wastes from the radionuclide management process, and the properties are directly linked to the radionuclide separation ratio that determines the composition of radionuclides in waste flow. The Korea Atomic Energy Research Institute have derived process flow diagrams for six candidates for the radionuclide management process, weighing on feasibility among various process options that can be considered. In addition, the GoldSim model has been established to calculate the mass and properties of waste from each unit process of the radionuclides management process and to observe their time variations. In this study, the candidates for the radionuclide management process are evaluated based on the waste mass and properties by using the GoldSim model, and sensitivity analysis changing the separation ratio are performed. And the effect of changes in the separation ratio for highly sensitive radionuclides on waste management strategy is analyzed. In particular, the separation ratio for high heat-emitting radionuclides determines the period of long-term decay storage.
Korea Atomic Energy Research Institute is developing a radionuclide management processes as a conditioning technology to reduce the burden of spent fuel disposal. The radionuclide management process refers to a process managing radionuclides with similar properties by introducing various technology options that can separate and recover radionuclides from spent fuels. In particular, it is a process aimed at increasing disposal efficiency by managing high-heat, high-mobility, and high-toxic radionuclides that can greatly affect the performance of the disposal system. Since the radionuclide management process seeks to consider various technology options for each unit process, it may have several process flows rather than have a single process flow. Describing the various process flows as a single flow network model is called the superstructure model. In this study, we intend to develop a superstructure model for the radionuclide management process and use it as a model to select the optimal process flow. To find the optimal process flow, an objective function must be defined, and at the fuel cycle system level multiple objectives such as effectiveness (disposal area), safety (explosure dose), and economics (cost) can be considered. Before performing the system-level optimization, it is necessary to select candidates of process flow in consideration of waste properties and process efficiency at the process level. In this study, a sensitivity analysis is conducted to analyze changes in waste properties such as decay heat and radioactivity when the separation ratio varies due to the performance change for each unit process of the radionuclide management process. Through this analysis, it is possible to derive a performance range that can have waste properties suitable for following waste treatment, especially waste form manufacturing. It is also possible to analyze the effect of waste properties that vary according to the performance change on waste storage and management approaches.
For the sustainable development, companies are making a lot of efforts such as activities of sales increase and cost reduction. Among these, efforts to use limited resources efficiently and effectively is still being made steadily. And many methods for management innovation are being introduced and used. However there were partial or temporary effects only. So there are not enough to achieve operations performance to cover the entire system. Therefore, in order to maximize performance or to improve sustainability across the companies, it is necessary to rebuild the existing system with process perspective not with existing functional perspective. This study was performed to achieve the objective that is operation performance improvement of certification body. So literature review was researched and analyed about the process innovation and the process approach. And basic model which is compatible with ISO/IEC 17021 requirement for the certification body was established in this study. Based on this model, one of the certification body was selected and operation system for this organization was established, documented and implemented through the process approach method. In the result, operations performance of certification body on the side of efficiency and effectiveness is analyzed and the effect of reconstruction of system on operations performance was figu
Survival and development of manufacturing business depends on how the companies make competitive product and put out on the market. In other words, the core competitiveness of manufacturing business is "product" and companies’ competitiveness and sustainable growth could be guaranteed by management from product deveIopment to release onto the market. However, there are few examples about establishing successful system yet. The purpose of this study is to analyze on how PLM affect the performance. In particular, findout how iIlegal copying of PLM system that contains know-how gives company negative effect and emphasize why companies should recognize the importance of iIIegaI copying.