For a member model in nonlinear structural analysis, a lumped plastic model that idealizes its flexural bending, shear, and axial behaviors by springs with the nonlinear hysteretic model is widely adopted because of its simplicity and transparency compared to the other rigorous finite element methods. On the other hand, a challenging task in its numerical solution is to satisfy the equilibrium condition between nonlinear flexural bending and shear springs connected in series. Since the local forces between flexural and shear springs are not balanced when one or both springs experience stiffness changes (e.g., cracking, yielding, and unloading), the additional unbalanced force due to overshooting or undershooting each spring force is also generated. This paper introduces an iterative scheme for numerical solutions satisfying the equilibrium conditions between flexural bending and shear springs. The effect of equilibrium iteration on analysis results is shown by comparing the results obtained from the proposed method to those from the conventional scheme, where the equilibrium condition is not perfectly satisfied.

본 연구는 FRP-콘크리트 합성구조의 휨/전단에 대한 구조적 성능 및 거동 특성을 해석적으로 규명하고자 휨/전단 저항성능에 대해 외연적 유한요소해석을 이용하여 FRP 합성보의 휨/전단파괴거동 해석을 실시하여 기 수행한 실험과 비교분석 하고, 적용된 콘크리트손상소성모델의 각각의 인자들의 영향에 대해 매개분석하고 최적화된 안을 제시하고자 하였다. 기하학적 및 재료적 비선형성 큰 경우 유한요소해석 중 내연적 해석의 경우 수렴에 많은 문제점을 내포함으로 외연적 유한요소 접근법이 보다 합리적임을 수치해석을 통해 보였다. 본 연구의 경우 콘크리트손상소성모델의 여러 인자들에 대한 매개변수 해석을 수행한 결과, 다이레이션각의 경우는 26°, 파괴에너지 값으로 100Nm/m2, 인자 Kc의 값으로는 0.667 그리고 손상계수는 감안하는 것이 합리적이다.

In real world applications, the response of structures may be dependent on the rate of loading and thus can be affected by transient loading, especially when the rate of loading is significant. In such situations, the rate of loading may become a major issue to understand structures during earthquake excitation or under blast or high velocity impact. In some cases, the rate effect on structures under strong earthquake excitation cannot be ignored when attempting to understand inelastic behavior of structures. M any researchers developed the constitutive theories in cyclic plasticity and viscoplasticity. In this study, numerical simulation by cyclic visocoplasticity models is introduced and analyzed. Finally, the analytical results are compared with experimental results as a means to evaluate and verify the model.

This study is intended to examine the motor skill learning and treadmill exercise on motor performance and synaptic plasticity in the cerebellar injured rats by harmaline. Experiment groups were divided into four groups and assigned 15 rats to each group. GroupⅠ was a normal control group(induced by saline); GroupⅡ was a experimental control group(cerebellar injured by harmaline); GroupⅢ was a group of motor skill learning after cerebellar injured by harmaline; GroupⅣ was a group of treadmill exercise after cerebellar injured by harmaline. In motor performance test, the outcome of groupⅡ was significantly lower than the groupⅢ, Ⅳ(especially groupⅢ)(p<.001). In histological finding, the experimental groups were destroy of dendrities and nucleus of cerebellar neurons. GroupⅢ, Ⅳ were decreased in degeneration of cerebellar neurons(especially groupⅢ). In immunohistochemistric response of synaptophysin in cerebellar cortex, experimental groups were decreased than groupⅠ. GroupⅢ's expression of synaptophysin was more increased than groupⅡ, Ⅳ. In electron microscopy finding, the experimental groups were degenerated of Purkinje cell. These result suggest that improved motor performance by motor skill learning after harmaline induced is associated with dynamically altered expression of synaptophysin in cerebellar cortex and that is related with synaptic plasticity.

최근 강구조물의 고층화 및 장경간화로 인하여 SM570강재와 같은 고강도 강재의 적용을 필요로 하고 있다. 강구조물의 정확한 내진설계를 위한 내진구조해석시 비선형 반복하중을 받는 강재의 특성을 명확히 포현할 수 있는 구성식이 필요하다. SM570는 최근 그 사용이 증가하고 있으나 아직 반복소성거동의 구현 및 정식화에 관한 연구는 아직 미진하다. 본 연구에서는 인장 및 저싸이클 피로 실험을 통하여 SM570 강재의 반복소성모델을 제안하였다. 제안된 반복소성모델을 3차원 유한요소에 적용하여 SM570이 사용된 원형 강교각의 내진해석을 수행하였다. 실험결과와 내진해석을 통하여 본 연구에서 제안한 구성식은 SM570이 사용된 강구조물의 복잡한 소성거동을 정도 높게 구현함을 알 수 있었다.