This study proposes a method to evaluate the publicity of real-time, demand-responsive, autonomous public-transportation systems. By analyzing real-time data collected based on publicity evaluation indicators suggested in previous research studies, this study seeks to establish a system that objectively assesses the publicity of public transportation. Thus, the introduction of autonomous public transportation systems is expected to contribute to solving problems in underserved transportation areas and enable more sophisticated public transportation operations. We reviewed evaluation indicators proposed in previous studies. Based on this review, publicity evaluation indicators were derived and specific criteria were selected to assess systematically the publicity of autonomous public transportation. An AHP analysis was conducted to assess the relative importance of each indicator by analyzing the importance of the selected indicators. Additionally, to score the indicators, minimum and maximum target values were established, and a method for assigning scores to each indicator was examined. The most important factor in the publicity evaluation of autonomous demand-responsive transport (DRT) was the “success rate of allocation to weak public transportation service areas,” with a significance level p of 0.204. This was analyzed as a key evaluation criterion because of the importance of service provision in areas with low-public-transportation accessibility. Subsequently, “Accessing distance to a virtual station” (p = 0.145) was evaluated as an important factor representing the convenience of the service. “Waiting time after allocation” (p = 0.134) also appeared as an important evaluation factor, as reducing waiting time considerably affected service quality. Conversely, “compliance rate of velocity” yielded the lowest significance (p = 0.017), as speed compliance was typically guaranteed owing to autonomous driving technology. This study proposed a specific evaluation method based on publicity indicators to provide a strategic direction for improving services and enhancing the publicity of autonomous DRT systems. These results can serve as a foundational resource for improving transportation services in underserved areas and for enhancing the overall quality of public transportation services. However, the study’s limitation was its inability to use real-time autonomous public transportation data, relying instead on I-MoD data from Incheon. This limitation constrained the ability to establish universal benchmarks because data from various municipalities were not included. Future research should collect and analyze data from diverse regions to establish more reliable evaluation indicators.
본 연구는 2017년부터 2021년까지 고속도로에서 발생한 약 9,600건의 사고를 분석하여 자율주행 긴급차량의 신속한 대응 능력을 향 상시키고자 하였다. 조사 결과, 2차 사고가 전체 사망자의 16.8%를 차지하며, 이들 중 약 74%가 선행사고와 관련이 있다는 점이 강조 된다. 이러한 통계는 긴급차량의 신속한 대처 능력이 피해를 최소화하는 데 얼마나 중요한지를 보여준다. 연구에서는 사고의 영향권을 정의하고, 이를 기반으로 긴급차량이 보다 안전하고 효율적으로 사고 현장에 접근할 수 있도록 하는 알고리즘을 개발하였다. 실제 교 통사고 데이터를 활용하여 사고 지속 시간과 다양한 변수를 고려한 기초 분석을 실시하였으며, 도로 특성, 사고 종류, 점유 차로 등 여러 요소를 반영하여 대응 기준을 설정했다. 알고리즘은 자율주행 차량이 실시간으로 주변 정보를 수집하고 신속하게 대응 방안을 마련할 수 있도록 설계되었다. 향후 연구에서는 알고리즘의 실제 도로 환경에서의 적용 가능성을 검토하고, 다양한 변수들을 포함한 추가 연구를 통해 성능을 더욱 개선할 계획이다. 이러한 연구 결과는 교통사고로 인한 피해를 줄이는 데 기여하고, 자율주행 기술을 활용하여 2차 사고의 가능성을 감소시키는 데 중요한 역할을 할 것으로 기대된다.
An experimental real-time hybrid method, which implements the wind response control of a building structure with only a two-way TLMD, is proposed and verified through a shaking table test. The building structure is divided into the upper experimental TLMD and the lower numerical structural part. The shaking table vibrates the TLMD with the response calculated from the numerical substructure,which is subjected to the excitations of the measured interface control force at its top story and an wind-load input at its base. The results show that the conventional method can be replaced by the proposed methodology with a simple installation and accuracy for evaluating the control performance of a TLMD
This paper aims to develop a wireless unified-maintenance system(WUMS) to obtain real-time structural response of civil structures. The WUMS integrates the GPS module, the strain module and the acceleration module based on the standalone controller, and includes the RF module for remote measurement and the battery for long term operation. In order to evaluate the performance of the WUMS, a response test using a modal shaker and a modal test using a model bridge were performed. The test results using USMS were compared with those measured by wired system. Finally, the developed WUMS was appropriate to obtain the structural response of the civil structure in real-time, unified, and wirelessly.
This paper aims to develop a wireless unified-maintenance system(WUMS) to obtain real-time structural response of civil structures. The WUMS integrates the GPS module, the strain module and the acceleration module based on the standalone controller, and includes the RF module for remote measurement and the battery for long term operation. In order to evaluate the performance of the WUMS, a response test using a modal shaker and a modal test using a model bridge were performed. The test results using USMS were compared with those measured by wired system. Finally, the developed WUMS was appropriate to obtain the structural response of the civil structure in real-time, unified, and wirelessly.
Gene-expression analysis is increasingly important in biological research, with real-time reverse PCR (RTPCR) becoming the method of choice for high-throughput and accurate expression profiling of selected genes. However, this technique requires important preliminary work for standardizing and optimizing the many parameters involved in the analysis. Plant stress studies are more and more based on gene expression. The analysis of gene expression requires sensitive and reproducible measurements for specific mRNA sequence. Several genes are regulated in response to abitoic stresses, such as salinity, and their gene products function in stress response and tolerance. The design of the primers and TaqMan probes for real-time PCR assays were carried out using the Primer ExpressTM software 3.0. The PCR efficiency was estimated through the linear regression of the dilution curve. To understand the expression pattern of various genes under salt stressed condition, we have developed a unique public resource of 9 stress-related genes in poplar. In this study, real-time RT-PCR was used to quantify the transcript level of 10 genes (9 stress-related genes and 1 house keeping gene) that could play a role in adaptation of Populus davidiana. Real-time RT-PCR analyses exhibited different expression ratios of related genes. The data obtained showed that determination of mRNA levels could constitute a new approach to study the stress response of P. davidiana after adaptation during growth in salinity condition.