This study examined the heat balance in the electrolytic reducer during oxide reduction of pyroprocessing. The adoption of carbon anodes instead of conventional platinum anodes in the oxide reduction process has made it possible to apply high currents, and it has been observed that the temperature of the molten salt of in the reactor rises rapidly when applying high currents, so it is important to maintain an optimal operational temperature range. In this study, salt resistant heat, reaction heat, and decay heat were identified as factors affecting heat balance during the operation of oxide reduction process. Equations describing the relationships among these factors were established. Then using this, a correlation was developed to understand the relationship between applied current and the molten salt temperature in the reactor observed in the actual operation of the carbon anode electrolytic reducer of KAERI. Furthermore, this study proposed strategies to mitigate excessive temperature elevation during oxide reduction operation. A comparative assessment of these approaches was conducted. Considering KAERI electrolytic reducer operation environment, among the considered cooling strategies, the cooling effectiveness was calculated to be highest in the following order: heat transfer to extra salt, convection, conduction, argon gas bubbling.

With the recent development of autonomous driving technology, many researchers have studied autonomous mobile robots. Accordingly, they are developing diverse mobile robot actuators. However, most actuators mainly use reducers made of chains, belts, multi-stage gears, etc. So the volume and size of the actuators increase, and power transmission efficiency tends to be relatively low. Therefore, this study has proposed the reducer of the mobile robot actuator using a complex planetary gear train with small volume and high power transmission efficiency, and has confirmed the stability of the proposed reducer through finite element analysis.

In case of worm reducer, the worm and worm wheel are the significant design elements. Most of the worm and worm wheel are being importer and assembled because that the localization is inadequate. As the demand increases and the necessity of localization and precision grows, to develop them is now more important things. In this study, we conducted the design, manufactured prototype and performance evaluation for worm reducer for dual lead 5.2:1 servo motor. The worm reducer is analyzed design reliability by finite element method. The performance evaluation for manufactured prototype worm reducer was conducted on the backlash, operation temperature and contact efficiency with/without load and satisfied for the all test items.

During the field operation of the Korean MBT(Main Battle Tank), the multi-smoke projectile launching system failed to function. As a result of conducting analysis, it was confirm that the gear shaft of reducer was failed. Therefore, a study on improvement in impact resistance of the reducer was conducted. The reducer was improved impact resistance by changing the design and material of gear shaft. The reliability of modified reducer was investigated by finite element analysis, performance and environmental tests. As a result of analysis, a strength of the modified gear shaft was improved by about 20 times than before improvement. The results of performance and environmental test show that the modified reducer is applicable for Korean MBT under the severe conditions. The quality improvement of multi-smoke projectile launching system contributes to survivability of Korean MBT.

A focal reducer is developed for CQUEAN (Camera for QUasars in EArly uNiverse), which is a CCD imaging system on the 2.1 m Otto Struve telescope at the McDonald observatory. It allows CQUEAN to secure a wider field of view by reducing the effective focal length by a factor of three. The optical point spread function without seeing effects is designed to be within one pixel (0.28300) over the field of view of 4.82' × 4.82' in optimum wavelength ranges of 0.8 − 1.1 μm. In this paper, we describe and discuss the characteristics of optical design, the lens and barrel fabrications and the alignment processes. The observation results show that the image quality of the focal reducer confirms the expectations from the design.

The agitator with a reducer are usually using on the process of a water treatment. However, working the reducer at the field, a lubricant oil can leak out. It causes an environment pollution and a water service/sewerage pollution problem. In this study, the reducer with a drywell structure is developed in order to prevent the oil leakage. The drywell structure is that the reducer bottom housing and the support column of an output shaft are united, and taper roller bearings are in the bottom housing. During the development of the reducer, a mockup and a prototype are made by using CAD and a high speed CNC machine. Then, to prove the performance of the prototype, the performance tests, unload working test and the mechanical torque efficiency test, are conducted by the torque meter device. Also a motor velocity(rpm) control system is developed by a PID control according to the working loads(MLSS data). The results of the test are shown that the maximum torque efficiency is 88.45%, the oil leakage and the abnormal noise do not occur during the work. Therefore the reducer with the drywell structure and the motor rpm PID control system is successfully developed.